1 /*
2 * This code was extracted from:
3 * git://github.com/gonzoua/u-boot-pi.git master
4 * and hence presumably (C) 2012 Oleksandr Tymoshenko
5 *
6 * Tweaks for U-Boot upstreaming
7 * (C) 2012 Stephen Warren
8 *
9 * Portions (e.g. read/write macros, concepts for back-to-back register write
10 * timing workarounds) obviously extracted from the Linux kernel at:
11 * https://github.com/raspberrypi/linux.git rpi-3.6.y
12 *
13 * The Linux kernel code has the following (c) and license, which is hence
14 * propagated to Oleksandr's tree and here:
15 *
16 * Support for SDHCI device on 2835
17 * Based on sdhci-bcm2708.c (c) 2010 Broadcom
18 *
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation.
22 *
23 * This program is distributed in the hope that it will be useful,
24 * but WITHOUT ANY WARRANTY; without even the implied warranty of
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
27 *
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
31 */
32
33 /* Supports:
34 * SDHCI platform device - Arasan SD controller in BCM2708
35 *
36 * Inspired by sdhci-pci.c, by Pierre Ossman
37 */
38
39 #include <common.h>
40 #include <dm.h>
41 #include <malloc.h>
42 #include <memalign.h>
43 #include <sdhci.h>
44 #include <asm/arch/msg.h>
45 #include <asm/arch/mbox.h>
46 #include <mach/sdhci.h>
47 #include <mach/timer.h>
48
49 /* 400KHz is max freq for card ID etc. Use that as min */
50 #define MIN_FREQ 400000
51 #define SDHCI_BUFFER 0x20
52
53 struct bcm2835_sdhci_plat {
54 struct mmc_config cfg;
55 struct mmc mmc;
56 };
57
58 struct bcm2835_sdhci_host {
59 struct sdhci_host host;
60 uint twoticks_delay;
61 ulong last_write;
62 };
63
to_bcm(struct sdhci_host * host)64 static inline struct bcm2835_sdhci_host *to_bcm(struct sdhci_host *host)
65 {
66 return (struct bcm2835_sdhci_host *)host;
67 }
68
bcm2835_sdhci_raw_writel(struct sdhci_host * host,u32 val,int reg)69 static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val,
70 int reg)
71 {
72 struct bcm2835_sdhci_host *bcm_host = to_bcm(host);
73
74 /*
75 * The Arasan has a bugette whereby it may lose the content of
76 * successive writes to registers that are within two SD-card clock
77 * cycles of each other (a clock domain crossing problem).
78 * It seems, however, that the data register does not have this problem.
79 * (Which is just as well - otherwise we'd have to nobble the DMA engine
80 * too)
81 */
82 if (reg != SDHCI_BUFFER) {
83 while (timer_get_us() - bcm_host->last_write <
84 bcm_host->twoticks_delay)
85 ;
86 }
87
88 writel(val, host->ioaddr + reg);
89 bcm_host->last_write = timer_get_us();
90 }
91
bcm2835_sdhci_raw_readl(struct sdhci_host * host,int reg)92 static inline u32 bcm2835_sdhci_raw_readl(struct sdhci_host *host, int reg)
93 {
94 return readl(host->ioaddr + reg);
95 }
96
bcm2835_sdhci_writel(struct sdhci_host * host,u32 val,int reg)97 static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg)
98 {
99 bcm2835_sdhci_raw_writel(host, val, reg);
100 }
101
bcm2835_sdhci_writew(struct sdhci_host * host,u16 val,int reg)102 static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg)
103 {
104 static u32 shadow;
105 u32 oldval = (reg == SDHCI_COMMAND) ? shadow :
106 bcm2835_sdhci_raw_readl(host, reg & ~3);
107 u32 word_num = (reg >> 1) & 1;
108 u32 word_shift = word_num * 16;
109 u32 mask = 0xffff << word_shift;
110 u32 newval = (oldval & ~mask) | (val << word_shift);
111
112 if (reg == SDHCI_TRANSFER_MODE)
113 shadow = newval;
114 else
115 bcm2835_sdhci_raw_writel(host, newval, reg & ~3);
116 }
117
bcm2835_sdhci_writeb(struct sdhci_host * host,u8 val,int reg)118 static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg)
119 {
120 u32 oldval = bcm2835_sdhci_raw_readl(host, reg & ~3);
121 u32 byte_num = reg & 3;
122 u32 byte_shift = byte_num * 8;
123 u32 mask = 0xff << byte_shift;
124 u32 newval = (oldval & ~mask) | (val << byte_shift);
125
126 bcm2835_sdhci_raw_writel(host, newval, reg & ~3);
127 }
128
bcm2835_sdhci_readl(struct sdhci_host * host,int reg)129 static u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
130 {
131 u32 val = bcm2835_sdhci_raw_readl(host, reg);
132
133 return val;
134 }
135
bcm2835_sdhci_readw(struct sdhci_host * host,int reg)136 static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg)
137 {
138 u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3));
139 u32 word_num = (reg >> 1) & 1;
140 u32 word_shift = word_num * 16;
141 u32 word = (val >> word_shift) & 0xffff;
142
143 return word;
144 }
145
bcm2835_sdhci_readb(struct sdhci_host * host,int reg)146 static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg)
147 {
148 u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3));
149 u32 byte_num = reg & 3;
150 u32 byte_shift = byte_num * 8;
151 u32 byte = (val >> byte_shift) & 0xff;
152
153 return byte;
154 }
155
156 static const struct sdhci_ops bcm2835_ops = {
157 .write_l = bcm2835_sdhci_writel,
158 .write_w = bcm2835_sdhci_writew,
159 .write_b = bcm2835_sdhci_writeb,
160 .read_l = bcm2835_sdhci_readl,
161 .read_w = bcm2835_sdhci_readw,
162 .read_b = bcm2835_sdhci_readb,
163 };
164
bcm2835_sdhci_bind(struct udevice * dev)165 static int bcm2835_sdhci_bind(struct udevice *dev)
166 {
167 struct bcm2835_sdhci_plat *plat = dev_get_platdata(dev);
168
169 return sdhci_bind(dev, &plat->mmc, &plat->cfg);
170 }
171
bcm2835_sdhci_probe(struct udevice * dev)172 static int bcm2835_sdhci_probe(struct udevice *dev)
173 {
174 struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
175 struct bcm2835_sdhci_plat *plat = dev_get_platdata(dev);
176 struct bcm2835_sdhci_host *priv = dev_get_priv(dev);
177 struct sdhci_host *host = &priv->host;
178 fdt_addr_t base;
179 int emmc_freq;
180 int ret;
181
182 base = devfdt_get_addr(dev);
183 if (base == FDT_ADDR_T_NONE)
184 return -EINVAL;
185
186 ret = bcm2835_get_mmc_clock(BCM2835_MBOX_CLOCK_ID_EMMC);
187 if (ret < 0) {
188 debug("%s: Failed to set MMC clock (err=%d)\n", __func__, ret);
189 return ret;
190 }
191 emmc_freq = ret;
192
193 /*
194 * See the comments in bcm2835_sdhci_raw_writel().
195 *
196 * This should probably be dynamically calculated based on the actual
197 * frequency. However, this is the longest we'll have to wait, and
198 * doesn't seem to slow access down too much, so the added complexity
199 * doesn't seem worth it for now.
200 *
201 * 1/MIN_FREQ is (max) time per tick of eMMC clock.
202 * 2/MIN_FREQ is time for two ticks.
203 * Multiply by 1000000 to get uS per two ticks.
204 * +1 for hack rounding.
205 */
206 priv->twoticks_delay = ((2 * 1000000) / MIN_FREQ) + 1;
207 priv->last_write = 0;
208
209 host->name = dev->name;
210 host->ioaddr = (void *)base;
211 host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B |
212 SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_NO_HISPD_BIT;
213 host->max_clk = emmc_freq;
214 host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
215 host->ops = &bcm2835_ops;
216
217 ret = sdhci_setup_cfg(&plat->cfg, host, emmc_freq, MIN_FREQ);
218 if (ret) {
219 debug("%s: Failed to setup SDHCI (err=%d)\n", __func__, ret);
220 return ret;
221 }
222
223 upriv->mmc = &plat->mmc;
224 host->mmc = &plat->mmc;
225 host->mmc->priv = host;
226
227 return sdhci_probe(dev);
228 }
229
230 static const struct udevice_id bcm2835_sdhci_match[] = {
231 { .compatible = "brcm,bcm2835-mmc" },
232 { /* sentinel */ }
233 };
234
235 U_BOOT_DRIVER(sdhci_cdns) = {
236 .name = "sdhci-bcm2835",
237 .id = UCLASS_MMC,
238 .of_match = bcm2835_sdhci_match,
239 .bind = bcm2835_sdhci_bind,
240 .probe = bcm2835_sdhci_probe,
241 .priv_auto_alloc_size = sizeof(struct bcm2835_sdhci_host),
242 .platdata_auto_alloc_size = sizeof(struct bcm2835_sdhci_plat),
243 .ops = &sdhci_ops,
244 };
245