1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * (C) Copyright 2012 SAMSUNG Electronics
4 * Jaehoon Chung <jh80.chung@samsung.com>
5 */
6
7 #include <common.h>
8 #include <dm.h>
9 #include <malloc.h>
10 #include <sdhci.h>
11 #include <fdtdec.h>
12 #include <linux/libfdt.h>
13 #include <asm/gpio.h>
14 #include <asm/arch/mmc.h>
15 #include <asm/arch/clk.h>
16 #include <errno.h>
17 #include <asm/arch/pinmux.h>
18
19 #ifdef CONFIG_DM_MMC
20 struct s5p_sdhci_plat {
21 struct mmc_config cfg;
22 struct mmc mmc;
23 };
24
25 DECLARE_GLOBAL_DATA_PTR;
26 #endif
27
28 static char *S5P_NAME = "SAMSUNG SDHCI";
s5p_sdhci_set_control_reg(struct sdhci_host * host)29 static void s5p_sdhci_set_control_reg(struct sdhci_host *host)
30 {
31 unsigned long val, ctrl;
32 /*
33 * SELCLKPADDS[17:16]
34 * 00 = 2mA
35 * 01 = 4mA
36 * 10 = 7mA
37 * 11 = 9mA
38 */
39 sdhci_writel(host, SDHCI_CTRL4_DRIVE_MASK(0x3), SDHCI_CONTROL4);
40
41 val = sdhci_readl(host, SDHCI_CONTROL2);
42 val &= SDHCI_CTRL2_SELBASECLK_MASK(3);
43
44 val |= SDHCI_CTRL2_ENSTAASYNCCLR |
45 SDHCI_CTRL2_ENCMDCNFMSK |
46 SDHCI_CTRL2_ENFBCLKRX |
47 SDHCI_CTRL2_ENCLKOUTHOLD;
48
49 sdhci_writel(host, val, SDHCI_CONTROL2);
50
51 /*
52 * FCSEL3[31] FCSEL2[23] FCSEL1[15] FCSEL0[7]
53 * FCSel[1:0] : Rx Feedback Clock Delay Control
54 * Inverter delay means10ns delay if SDCLK 50MHz setting
55 * 01 = Delay1 (basic delay)
56 * 11 = Delay2 (basic delay + 2ns)
57 * 00 = Delay3 (inverter delay)
58 * 10 = Delay4 (inverter delay + 2ns)
59 */
60 val = SDHCI_CTRL3_FCSEL0 | SDHCI_CTRL3_FCSEL1;
61 sdhci_writel(host, val, SDHCI_CONTROL3);
62
63 /*
64 * SELBASECLK[5:4]
65 * 00/01 = HCLK
66 * 10 = EPLL
67 * 11 = XTI or XEXTCLK
68 */
69 ctrl = sdhci_readl(host, SDHCI_CONTROL2);
70 ctrl &= ~SDHCI_CTRL2_SELBASECLK_MASK(0x3);
71 ctrl |= SDHCI_CTRL2_SELBASECLK_MASK(0x2);
72 sdhci_writel(host, ctrl, SDHCI_CONTROL2);
73 }
74
s5p_set_clock(struct sdhci_host * host,u32 div)75 static void s5p_set_clock(struct sdhci_host *host, u32 div)
76 {
77 /* ToDo : Use the Clock Framework */
78 set_mmc_clk(host->index, div);
79 }
80
81 static const struct sdhci_ops s5p_sdhci_ops = {
82 .set_clock = &s5p_set_clock,
83 .set_control_reg = &s5p_sdhci_set_control_reg,
84 };
85
s5p_sdhci_core_init(struct sdhci_host * host)86 static int s5p_sdhci_core_init(struct sdhci_host *host)
87 {
88 host->name = S5P_NAME;
89
90 host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
91 SDHCI_QUIRK_32BIT_DMA_ADDR |
92 SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_USE_WIDE8;
93 host->max_clk = 52000000;
94 host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
95 host->ops = &s5p_sdhci_ops;
96
97 if (host->bus_width == 8)
98 host->host_caps |= MMC_MODE_8BIT;
99
100 #ifndef CONFIG_BLK
101 return add_sdhci(host, 0, 400000);
102 #else
103 return 0;
104 #endif
105 }
106
s5p_sdhci_init(u32 regbase,int index,int bus_width)107 int s5p_sdhci_init(u32 regbase, int index, int bus_width)
108 {
109 struct sdhci_host *host = calloc(1, sizeof(struct sdhci_host));
110 if (!host) {
111 printf("sdhci__host allocation fail!\n");
112 return -ENOMEM;
113 }
114 host->ioaddr = (void *)regbase;
115 host->index = index;
116 host->bus_width = bus_width;
117
118 return s5p_sdhci_core_init(host);
119 }
120
121 #if CONFIG_IS_ENABLED(OF_CONTROL)
122 struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
123
do_sdhci_init(struct sdhci_host * host)124 static int do_sdhci_init(struct sdhci_host *host)
125 {
126 int dev_id, flag, ret;
127
128 flag = host->bus_width == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
129 dev_id = host->index + PERIPH_ID_SDMMC0;
130
131 ret = exynos_pinmux_config(dev_id, flag);
132 if (ret) {
133 printf("external SD not configured\n");
134 return ret;
135 }
136
137 if (dm_gpio_is_valid(&host->pwr_gpio)) {
138 dm_gpio_set_value(&host->pwr_gpio, 1);
139 ret = exynos_pinmux_config(dev_id, flag);
140 if (ret) {
141 debug("MMC not configured\n");
142 return ret;
143 }
144 }
145
146 if (dm_gpio_is_valid(&host->cd_gpio)) {
147 ret = dm_gpio_get_value(&host->cd_gpio);
148 if (ret) {
149 debug("no SD card detected (%d)\n", ret);
150 return -ENODEV;
151 }
152 }
153
154 return s5p_sdhci_core_init(host);
155 }
156
sdhci_get_config(const void * blob,int node,struct sdhci_host * host)157 static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host)
158 {
159 int bus_width, dev_id;
160 unsigned int base;
161
162 /* Get device id */
163 dev_id = pinmux_decode_periph_id(blob, node);
164 if (dev_id < PERIPH_ID_SDMMC0 || dev_id > PERIPH_ID_SDMMC3) {
165 debug("MMC: Can't get device id\n");
166 return -EINVAL;
167 }
168 host->index = dev_id - PERIPH_ID_SDMMC0;
169
170 /* Get bus width */
171 bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
172 if (bus_width <= 0) {
173 debug("MMC: Can't get bus-width\n");
174 return -EINVAL;
175 }
176 host->bus_width = bus_width;
177
178 /* Get the base address from the device node */
179 base = fdtdec_get_addr(blob, node, "reg");
180 if (!base) {
181 debug("MMC: Can't get base address\n");
182 return -EINVAL;
183 }
184 host->ioaddr = (void *)base;
185
186 gpio_request_by_name_nodev(offset_to_ofnode(node), "pwr-gpios", 0,
187 &host->pwr_gpio, GPIOD_IS_OUT);
188 gpio_request_by_name_nodev(offset_to_ofnode(node), "cd-gpios", 0,
189 &host->cd_gpio, GPIOD_IS_IN);
190
191 return 0;
192 }
193
process_nodes(const void * blob,int node_list[],int count)194 static int process_nodes(const void *blob, int node_list[], int count)
195 {
196 struct sdhci_host *host;
197 int i, node, ret;
198 int failed = 0;
199
200 debug("%s: count = %d\n", __func__, count);
201
202 /* build sdhci_host[] for each controller */
203 for (i = 0; i < count; i++) {
204 node = node_list[i];
205 if (node <= 0)
206 continue;
207
208 host = &sdhci_host[i];
209
210 ret = sdhci_get_config(blob, node, host);
211 if (ret) {
212 printf("%s: failed to decode dev %d (%d)\n", __func__, i, ret);
213 failed++;
214 continue;
215 }
216
217 ret = do_sdhci_init(host);
218 if (ret && ret != -ENODEV) {
219 printf("%s: failed to initialize dev %d (%d)\n", __func__, i, ret);
220 failed++;
221 }
222 }
223
224 /* we only consider it an error when all nodes fail */
225 return (failed == count ? -1 : 0);
226 }
227
exynos_mmc_init(const void * blob)228 int exynos_mmc_init(const void *blob)
229 {
230 int count;
231 int node_list[SDHCI_MAX_HOSTS];
232
233 count = fdtdec_find_aliases_for_id(blob, "mmc",
234 COMPAT_SAMSUNG_EXYNOS_MMC, node_list,
235 SDHCI_MAX_HOSTS);
236
237 return process_nodes(blob, node_list, count);
238 }
239 #endif
240
241 #ifdef CONFIG_DM_MMC
s5p_sdhci_probe(struct udevice * dev)242 static int s5p_sdhci_probe(struct udevice *dev)
243 {
244 struct s5p_sdhci_plat *plat = dev_get_platdata(dev);
245 struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
246 struct sdhci_host *host = dev_get_priv(dev);
247 int ret;
248
249 ret = sdhci_get_config(gd->fdt_blob, dev_of_offset(dev), host);
250 if (ret)
251 return ret;
252
253 ret = do_sdhci_init(host);
254 if (ret)
255 return ret;
256
257 ret = sdhci_setup_cfg(&plat->cfg, host, 0, 400000);
258 if (ret)
259 return ret;
260
261 host->mmc = &plat->mmc;
262 host->mmc->priv = host;
263 host->mmc->dev = dev;
264 upriv->mmc = host->mmc;
265
266 return sdhci_probe(dev);
267 }
268
s5p_sdhci_bind(struct udevice * dev)269 static int s5p_sdhci_bind(struct udevice *dev)
270 {
271 struct s5p_sdhci_plat *plat = dev_get_platdata(dev);
272 int ret;
273
274 ret = sdhci_bind(dev, &plat->mmc, &plat->cfg);
275 if (ret)
276 return ret;
277
278 return 0;
279 }
280
281 static const struct udevice_id s5p_sdhci_ids[] = {
282 { .compatible = "samsung,exynos4412-sdhci"},
283 { }
284 };
285
286 U_BOOT_DRIVER(s5p_sdhci_drv) = {
287 .name = "s5p_sdhci",
288 .id = UCLASS_MMC,
289 .of_match = s5p_sdhci_ids,
290 .bind = s5p_sdhci_bind,
291 .ops = &sdhci_ops,
292 .probe = s5p_sdhci_probe,
293 .priv_auto_alloc_size = sizeof(struct sdhci_host),
294 .platdata_auto_alloc_size = sizeof(struct s5p_sdhci_plat),
295 };
296 #endif /* CONFIG_DM_MMC */
297