1 /***************************************************************************/ 2 /* */ 3 /* ftoption.h */ 4 /* */ 5 /* User-selectable configuration macros (specification only). */ 6 /* */ 7 /* Copyright 1996-2019 by */ 8 /* David Turner, Robert Wilhelm, and Werner Lemberg. */ 9 /* */ 10 /* This file is part of the FreeType project, and may only be used, */ 11 /* modified, and distributed under the terms of the FreeType project */ 12 /* license, LICENSE.TXT. By continuing to use, modify, or distribute */ 13 /* this file you indicate that you have read the license and */ 14 /* understand and accept it fully. */ 15 /* */ 16 /***************************************************************************/ 17 18 19 #pragma once 20 21 #include <ft2build.h> 22 23 24 FT_BEGIN_HEADER 25 26 /*************************************************************************/ 27 /* */ 28 /* USER-SELECTABLE CONFIGURATION MACROS */ 29 /* */ 30 /* This file contains the default configuration macro definitions for */ 31 /* a standard build of the FreeType library. There are three ways to */ 32 /* use this file to build project-specific versions of the library: */ 33 /* */ 34 /* - You can modify this file by hand, but this is not recommended in */ 35 /* cases where you would like to build several versions of the */ 36 /* library from a single source directory. */ 37 /* */ 38 /* - You can put a copy of this file in your build directory, more */ 39 /* precisely in `$BUILD/freetype/config/ftoption.h', where `$BUILD' */ 40 /* is the name of a directory that is included _before_ the FreeType */ 41 /* include path during compilation. */ 42 /* */ 43 /* The default FreeType Makefiles and Jamfiles use the build */ 44 /* directory `builds/<system>' by default, but you can easily change */ 45 /* that for your own projects. */ 46 /* */ 47 /* - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it */ 48 /* slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to */ 49 /* locate this file during the build. For example, */ 50 /* */ 51 /* #define FT_CONFIG_OPTIONS_H <myftoptions.h> */ 52 /* #include <freetype/config/ftheader.h> */ 53 /* */ 54 /* will use `$BUILD/myftoptions.h' instead of this file for macro */ 55 /* definitions. */ 56 /* */ 57 /* Note also that you can similarly pre-define the macro */ 58 /* FT_CONFIG_MODULES_H used to locate the file listing of the modules */ 59 /* that are statically linked to the library at compile time. By */ 60 /* default, this file is <freetype/config/ftmodule.h>. */ 61 /* */ 62 /* We highly recommend using the third method whenever possible. */ 63 /* */ 64 /*************************************************************************/ 65 66 67 /*************************************************************************/ 68 /*************************************************************************/ 69 /**** ****/ 70 /**** G E N E R A L F R E E T Y P E 2 C O N F I G U R A T I O N ****/ 71 /**** ****/ 72 /*************************************************************************/ 73 /*************************************************************************/ 74 75 76 /*#***********************************************************************/ 77 /* */ 78 /* If you enable this configuration option, FreeType recognizes an */ 79 /* environment variable called `FREETYPE_PROPERTIES', which can be used */ 80 /* to control the various font drivers and modules. The controllable */ 81 /* properties are listed in the section @properties. */ 82 /* */ 83 /* You have to undefine this configuration option on platforms that lack */ 84 /* the concept of environment variables (and thus don't have the */ 85 /* `getenv' function), for example Windows CE. */ 86 /* */ 87 /* `FREETYPE_PROPERTIES' has the following syntax form (broken here into */ 88 /* multiple lines for better readability). */ 89 /* */ 90 /* { */ 91 /* <optional whitespace> */ 92 /* <module-name1> ':' */ 93 /* <property-name1> '=' <property-value1> */ 94 /* <whitespace> */ 95 /* <module-name2> ':' */ 96 /* <property-name2> '=' <property-value2> */ 97 /* ... */ 98 /* } */ 99 /* */ 100 /* Example: */ 101 /* */ 102 /* FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ */ 103 /* cff:no-stem-darkening=1 \ */ 104 /* autofitter:warping=1 */ 105 /* */ 106 /* #define FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES */ 107 108 109 /*************************************************************************/ 110 /* */ 111 /* Uncomment the line below if you want to activate LCD rendering */ 112 /* technology similar to ClearType in this build of the library. This */ 113 /* technology triples the resolution in the direction color subpixels. */ 114 /* To mitigate color fringes inherent to this technology, you also need */ 115 /* to explicitly set up LCD filtering. */ 116 /* */ 117 /* Note that this feature is covered by several Microsoft patents */ 118 /* and should not be activated in any default build of the library. */ 119 /* When this macro is not defined, FreeType offers alternative LCD */ 120 /* rendering technology that produces excellent output without LCD */ 121 /* filtering. */ 122 /* */ 123 /* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */ 124 125 126 /*************************************************************************/ 127 /* */ 128 /* Many compilers provide a non-ANSI 64-bit data type that can be used */ 129 /* by FreeType to speed up some computations. However, this will create */ 130 /* some problems when compiling the library in strict ANSI mode. */ 131 /* */ 132 /* For this reason, the use of 64-bit integers is normally disabled when */ 133 /* the __STDC__ macro is defined. You can however disable this by */ 134 /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here. */ 135 /* */ 136 /* For most compilers, this will only create compilation warnings when */ 137 /* building the library. */ 138 /* */ 139 /* ObNote: The compiler-specific 64-bit integers are detected in the */ 140 /* file `ftconfig.h' either statically or through the */ 141 /* `configure' script on supported platforms. */ 142 /* */ 143 #undef FT_CONFIG_OPTION_FORCE_INT64 144 145 146 /*************************************************************************/ 147 /* */ 148 /* If this macro is defined, do not try to use an assembler version of */ 149 /* performance-critical functions (e.g. FT_MulFix). You should only do */ 150 /* that to verify that the assembler function works properly, or to */ 151 /* execute benchmark tests of the various implementations. */ 152 /* #define FT_CONFIG_OPTION_NO_ASSEMBLER */ 153 154 155 /*************************************************************************/ 156 /* */ 157 /* If this macro is defined, try to use an inlined assembler version of */ 158 /* the `FT_MulFix' function, which is a `hotspot' when loading and */ 159 /* hinting glyphs, and which should be executed as fast as possible. */ 160 /* */ 161 /* Note that if your compiler or CPU is not supported, this will default */ 162 /* to the standard and portable implementation found in `ftcalc.c'. */ 163 /* */ 164 #define FT_CONFIG_OPTION_INLINE_MULFIX 165 166 167 /*************************************************************************/ 168 /* */ 169 /* LZW-compressed file support. */ 170 /* */ 171 /* FreeType now handles font files that have been compressed with the */ 172 /* `compress' program. This is mostly used to parse many of the PCF */ 173 /* files that come with various X11 distributions. The implementation */ 174 /* uses NetBSD's `zopen' to partially uncompress the file on the fly */ 175 /* (see src/lzw/ftgzip.c). */ 176 /* */ 177 /* Define this macro if you want to enable this `feature'. */ 178 /* */ 179 /* #define FT_CONFIG_OPTION_USE_LZW */ 180 181 182 /*************************************************************************/ 183 /* */ 184 /* Gzip-compressed file support. */ 185 /* */ 186 /* FreeType now handles font files that have been compressed with the */ 187 /* `gzip' program. This is mostly used to parse many of the PCF files */ 188 /* that come with XFree86. The implementation uses `zlib' to */ 189 /* partially uncompress the file on the fly (see src/gzip/ftgzip.c). */ 190 /* */ 191 /* Define this macro if you want to enable this `feature'. See also */ 192 /* the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below. */ 193 /* */ 194 /* #define FT_CONFIG_OPTION_USE_ZLIB */ 195 196 197 /*************************************************************************/ 198 /* */ 199 /* ZLib library selection */ 200 /* */ 201 /* This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined. */ 202 /* It allows FreeType's `ftgzip' component to link to the system's */ 203 /* installation of the ZLib library. This is useful on systems like */ 204 /* Unix or VMS where it generally is already available. */ 205 /* */ 206 /* If you let it undefined, the component will use its own copy */ 207 /* of the zlib sources instead. These have been modified to be */ 208 /* included directly within the component and *not* export external */ 209 /* function names. This allows you to link any program with FreeType */ 210 /* _and_ ZLib without linking conflicts. */ 211 /* */ 212 /* Do not #undef this macro here since the build system might define */ 213 /* it for certain configurations only. */ 214 /* */ 215 /* If you use a build system like cmake or the `configure' script, */ 216 /* options set by those programs have precendence, overwriting the */ 217 /* value here with the configured one. */ 218 /* */ 219 /* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */ 220 221 222 /*************************************************************************/ 223 /* */ 224 /* Bzip2-compressed file support. */ 225 /* */ 226 /* FreeType now handles font files that have been compressed with the */ 227 /* `bzip2' program. This is mostly used to parse many of the PCF */ 228 /* files that come with XFree86. The implementation uses `libbz2' to */ 229 /* partially uncompress the file on the fly (see src/bzip2/ftbzip2.c). */ 230 /* Contrary to gzip, bzip2 currently is not included and need to use */ 231 /* the system available bzip2 implementation. */ 232 /* */ 233 /* Define this macro if you want to enable this `feature'. */ 234 /* */ 235 /* If you use a build system like cmake or the `configure' script, */ 236 /* options set by those programs have precendence, overwriting the */ 237 /* value here with the configured one. */ 238 /* */ 239 /* #define FT_CONFIG_OPTION_USE_BZIP2 */ 240 241 242 /*************************************************************************/ 243 /* */ 244 /* Define to disable the use of file stream functions and types, FILE, */ 245 /* fopen() etc. Enables the use of smaller system libraries on embedded */ 246 /* systems that have multiple system libraries, some with or without */ 247 /* file stream support, in the cases where file stream support is not */ 248 /* necessary such as memory loading of font files. */ 249 /* */ 250 #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT 251 252 253 /*************************************************************************/ 254 /* */ 255 /* PNG bitmap support. */ 256 /* */ 257 /* FreeType now handles loading color bitmap glyphs in the PNG format. */ 258 /* This requires help from the external libpng library. Uncompressed */ 259 /* color bitmaps do not need any external libraries and will be */ 260 /* supported regardless of this configuration. */ 261 /* */ 262 /* Define this macro if you want to enable this `feature'. */ 263 /* */ 264 /* If you use a build system like cmake or the `configure' script, */ 265 /* options set by those programs have precendence, overwriting the */ 266 /* value here with the configured one. */ 267 /* */ 268 /* #define FT_CONFIG_OPTION_USE_PNG */ 269 270 271 /*************************************************************************/ 272 /* */ 273 /* HarfBuzz support. */ 274 /* */ 275 /* FreeType uses the HarfBuzz library to improve auto-hinting of */ 276 /* OpenType fonts. If available, many glyphs not directly addressable */ 277 /* by a font's character map will be hinted also. */ 278 /* */ 279 /* Define this macro if you want to enable this `feature'. */ 280 /* */ 281 /* If you use a build system like cmake or the `configure' script, */ 282 /* options set by those programs have precendence, overwriting the */ 283 /* value here with the configured one. */ 284 /* */ 285 /* #define FT_CONFIG_OPTION_USE_HARFBUZZ */ 286 287 288 /*************************************************************************/ 289 /* */ 290 /* Glyph Postscript Names handling */ 291 /* */ 292 /* By default, FreeType 2 is compiled with the `psnames' module. This */ 293 /* module is in charge of converting a glyph name string into a */ 294 /* Unicode value, or return a Macintosh standard glyph name for the */ 295 /* use with the TrueType `post' table. */ 296 /* */ 297 /* Undefine this macro if you do not want `psnames' compiled in your */ 298 /* build of FreeType. This has the following effects: */ 299 /* */ 300 /* - The TrueType driver will provide its own set of glyph names, */ 301 /* if you build it to support postscript names in the TrueType */ 302 /* `post' table, but will not synthesize a missing Unicode charmap. */ 303 /* */ 304 /* - The Type 1 driver will not be able to synthesize a Unicode */ 305 /* charmap out of the glyphs found in the fonts. */ 306 /* */ 307 /* You would normally undefine this configuration macro when building */ 308 /* a version of FreeType that doesn't contain a Type 1 or CFF driver. */ 309 /* */ 310 #define FT_CONFIG_OPTION_POSTSCRIPT_NAMES 311 312 313 /*************************************************************************/ 314 /* */ 315 /* Postscript Names to Unicode Values support */ 316 /* */ 317 /* By default, FreeType 2 is built with the `PSNames' module compiled */ 318 /* in. Among other things, the module is used to convert a glyph name */ 319 /* into a Unicode value. This is especially useful in order to */ 320 /* synthesize on the fly a Unicode charmap from the CFF/Type 1 driver */ 321 /* through a big table named the `Adobe Glyph List' (AGL). */ 322 /* */ 323 /* Undefine this macro if you do not want the Adobe Glyph List */ 324 /* compiled in your `PSNames' module. The Type 1 driver will not be */ 325 /* able to synthesize a Unicode charmap out of the glyphs found in the */ 326 /* fonts. */ 327 /* */ 328 #define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST 329 330 331 /*************************************************************************/ 332 /* */ 333 /* Support for Mac fonts */ 334 /* */ 335 /* Define this macro if you want support for outline fonts in Mac */ 336 /* format (mac dfont, mac resource, macbinary containing a mac */ 337 /* resource) on non-Mac platforms. */ 338 /* */ 339 /* Note that the `FOND' resource isn't checked. */ 340 /* */ 341 #define FT_CONFIG_OPTION_MAC_FONTS 342 343 344 /*************************************************************************/ 345 /* */ 346 /* Guessing methods to access embedded resource forks */ 347 /* */ 348 /* Enable extra Mac fonts support on non-Mac platforms (e.g. */ 349 /* GNU/Linux). */ 350 /* */ 351 /* Resource forks which include fonts data are stored sometimes in */ 352 /* locations which users or developers don't expected. In some cases, */ 353 /* resource forks start with some offset from the head of a file. In */ 354 /* other cases, the actual resource fork is stored in file different */ 355 /* from what the user specifies. If this option is activated, */ 356 /* FreeType tries to guess whether such offsets or different file */ 357 /* names must be used. */ 358 /* */ 359 /* Note that normal, direct access of resource forks is controlled via */ 360 /* the FT_CONFIG_OPTION_MAC_FONTS option. */ 361 /* */ 362 #ifdef FT_CONFIG_OPTION_MAC_FONTS 363 #define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK 364 #endif 365 366 367 /*************************************************************************/ 368 /* */ 369 /* Allow the use of FT_Incremental_Interface to load typefaces that */ 370 /* contain no glyph data, but supply it via a callback function. */ 371 /* This is required by clients supporting document formats which */ 372 /* supply font data incrementally as the document is parsed, such */ 373 /* as the Ghostscript interpreter for the PostScript language. */ 374 /* */ 375 #define FT_CONFIG_OPTION_INCREMENTAL 376 377 378 /*************************************************************************/ 379 /* */ 380 /* The size in bytes of the render pool used by the scan-line converter */ 381 /* to do all of its work. */ 382 /* */ 383 #define FT_RENDER_POOL_SIZE 16384L 384 385 386 /*************************************************************************/ 387 /* */ 388 /* FT_MAX_MODULES */ 389 /* */ 390 /* The maximum number of modules that can be registered in a single */ 391 /* FreeType library object. 32 is the default. */ 392 /* */ 393 #define FT_MAX_MODULES 32 394 395 396 /*************************************************************************/ 397 /* */ 398 /* Debug level */ 399 /* */ 400 /* FreeType can be compiled in debug or trace mode. In debug mode, */ 401 /* errors are reported through the `ftdebug' component. In trace */ 402 /* mode, additional messages are sent to the standard output during */ 403 /* execution. */ 404 /* */ 405 /* Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode. */ 406 /* Define FT_DEBUG_LEVEL_TRACE to build it in trace mode. */ 407 /* */ 408 /* Don't define any of these macros to compile in `release' mode! */ 409 /* */ 410 /* Do not #undef these macros here since the build system might define */ 411 /* them for certain configurations only. */ 412 /* */ 413 /* #define FT_DEBUG_LEVEL_ERROR */ 414 /* #define FT_DEBUG_LEVEL_TRACE */ 415 416 417 /*************************************************************************/ 418 /* */ 419 /* Autofitter debugging */ 420 /* */ 421 /* If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to */ 422 /* control the autofitter behaviour for debugging purposes with global */ 423 /* boolean variables (consequently, you should *never* enable this */ 424 /* while compiling in `release' mode): */ 425 /* */ 426 /* _af_debug_disable_horz_hints */ 427 /* _af_debug_disable_vert_hints */ 428 /* _af_debug_disable_blue_hints */ 429 /* */ 430 /* Additionally, the following functions provide dumps of various */ 431 /* internal autofit structures to stdout (using `printf'): */ 432 /* */ 433 /* af_glyph_hints_dump_points */ 434 /* af_glyph_hints_dump_segments */ 435 /* af_glyph_hints_dump_edges */ 436 /* af_glyph_hints_get_num_segments */ 437 /* af_glyph_hints_get_segment_offset */ 438 /* */ 439 /* As an argument, they use another global variable: */ 440 /* */ 441 /* _af_debug_hints */ 442 /* */ 443 /* Please have a look at the `ftgrid' demo program to see how those */ 444 /* variables and macros should be used. */ 445 /* */ 446 /* Do not #undef these macros here since the build system might define */ 447 /* them for certain configurations only. */ 448 /* */ 449 /* #define FT_DEBUG_AUTOFIT */ 450 451 452 /*************************************************************************/ 453 /* */ 454 /* Memory Debugging */ 455 /* */ 456 /* FreeType now comes with an integrated memory debugger that is */ 457 /* capable of detecting simple errors like memory leaks or double */ 458 /* deletes. To compile it within your build of the library, you */ 459 /* should define FT_DEBUG_MEMORY here. */ 460 /* */ 461 /* Note that the memory debugger is only activated at runtime when */ 462 /* when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */ 463 /* */ 464 /* Do not #undef this macro here since the build system might define */ 465 /* it for certain configurations only. */ 466 /* */ 467 /* #define FT_DEBUG_MEMORY */ 468 469 470 /*************************************************************************/ 471 /* */ 472 /* Module errors */ 473 /* */ 474 /* If this macro is set (which is _not_ the default), the higher byte */ 475 /* of an error code gives the module in which the error has occurred, */ 476 /* while the lower byte is the real error code. */ 477 /* */ 478 /* Setting this macro makes sense for debugging purposes only, since */ 479 /* it would break source compatibility of certain programs that use */ 480 /* FreeType 2. */ 481 /* */ 482 /* More details can be found in the files ftmoderr.h and fterrors.h. */ 483 /* */ 484 #undef FT_CONFIG_OPTION_USE_MODULE_ERRORS 485 486 487 /*************************************************************************/ 488 /* */ 489 /* Position Independent Code */ 490 /* */ 491 /* If this macro is set (which is _not_ the default), FreeType2 will */ 492 /* avoid creating constants that require address fixups. Instead the */ 493 /* constants will be moved into a struct and additional intialization */ 494 /* code will be used. */ 495 /* */ 496 /* Setting this macro is needed for systems that prohibit address */ 497 /* fixups, such as BREW. [Note that standard compilers like gcc or */ 498 /* clang handle PIC generation automatically; you don't have to set */ 499 /* FT_CONFIG_OPTION_PIC, which is only necessary for very special */ 500 /* compilers.] */ 501 /* */ 502 /* Note that FT_CONFIG_OPTION_PIC support is not available for all */ 503 /* modules (see `modules.cfg' for a complete list). For building with */ 504 /* FT_CONFIG_OPTION_PIC support, do the following. */ 505 /* */ 506 /* 0. Clone the repository. */ 507 /* 1. Define FT_CONFIG_OPTION_PIC. */ 508 /* 2. Remove all subdirectories in `src' that don't have */ 509 /* FT_CONFIG_OPTION_PIC support. */ 510 /* 3. Comment out the corresponding modules in `modules.cfg'. */ 511 /* 4. Compile. */ 512 /* */ 513 /* #define FT_CONFIG_OPTION_PIC */ 514 515 516 /*************************************************************************/ 517 /*************************************************************************/ 518 /**** ****/ 519 /**** S F N T D R I V E R C O N F I G U R A T I O N ****/ 520 /**** ****/ 521 /*************************************************************************/ 522 /*************************************************************************/ 523 524 525 /*************************************************************************/ 526 /* */ 527 /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support */ 528 /* embedded bitmaps in all formats using the SFNT module (namely */ 529 /* TrueType & OpenType). */ 530 /* */ 531 #define TT_CONFIG_OPTION_EMBEDDED_BITMAPS 532 533 534 /*************************************************************************/ 535 /* */ 536 /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to */ 537 /* load and enumerate the glyph Postscript names in a TrueType or */ 538 /* OpenType file. */ 539 /* */ 540 /* Note that when you do not compile the `PSNames' module by undefining */ 541 /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will */ 542 /* contain additional code used to read the PS Names table from a font. */ 543 /* */ 544 /* (By default, the module uses `PSNames' to extract glyph names.) */ 545 /* */ 546 #define TT_CONFIG_OPTION_POSTSCRIPT_NAMES 547 548 549 /*************************************************************************/ 550 /* */ 551 /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to */ 552 /* access the internal name table in a SFNT-based format like TrueType */ 553 /* or OpenType. The name table contains various strings used to */ 554 /* describe the font, like family name, copyright, version, etc. It */ 555 /* does not contain any glyph name though. */ 556 /* */ 557 /* Accessing SFNT names is done through the functions declared in */ 558 /* `ftsnames.h'. */ 559 /* */ 560 #define TT_CONFIG_OPTION_SFNT_NAMES 561 562 563 /*************************************************************************/ 564 /* */ 565 /* TrueType CMap support */ 566 /* */ 567 /* Here you can fine-tune which TrueType CMap table format shall be */ 568 /* supported. */ 569 #define TT_CONFIG_CMAP_FORMAT_0 570 #define TT_CONFIG_CMAP_FORMAT_2 571 #define TT_CONFIG_CMAP_FORMAT_4 572 #define TT_CONFIG_CMAP_FORMAT_6 573 #define TT_CONFIG_CMAP_FORMAT_8 574 #define TT_CONFIG_CMAP_FORMAT_10 575 #define TT_CONFIG_CMAP_FORMAT_12 576 #define TT_CONFIG_CMAP_FORMAT_13 577 #define TT_CONFIG_CMAP_FORMAT_14 578 579 580 /*************************************************************************/ 581 /*************************************************************************/ 582 /**** ****/ 583 /**** T R U E T Y P E D R I V E R C O N F I G U R A T I O N ****/ 584 /**** ****/ 585 /*************************************************************************/ 586 /*************************************************************************/ 587 588 /*************************************************************************/ 589 /* */ 590 /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile */ 591 /* a bytecode interpreter in the TrueType driver. */ 592 /* */ 593 /* By undefining this, you will only compile the code necessary to load */ 594 /* TrueType glyphs without hinting. */ 595 /* */ 596 /* Do not #undef this macro here, since the build system might */ 597 /* define it for certain configurations only. */ 598 /* */ 599 #define TT_CONFIG_OPTION_BYTECODE_INTERPRETER 600 601 602 /*************************************************************************/ 603 /* */ 604 /* Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile */ 605 /* subpixel hinting support into the TrueType driver. This modifies the */ 606 /* TrueType hinting mechanism when anything but FT_RENDER_MODE_MONO is */ 607 /* requested. */ 608 /* */ 609 /* In particular, it modifies the bytecode interpreter to interpret (or */ 610 /* not) instructions in a certain way so that all TrueType fonts look */ 611 /* like they do in a Windows ClearType (DirectWrite) environment. See */ 612 /* [1] for a technical overview on what this means. See `ttinterp.h' */ 613 /* for more details on the LEAN option. */ 614 /* */ 615 /* There are three possible values. */ 616 /* */ 617 /* Value 1: */ 618 /* This value is associated with the `Infinality' moniker, */ 619 /* contributed by an individual nicknamed Infinality with the goal of */ 620 /* making TrueType fonts render better than on Windows. A high */ 621 /* amount of configurability and flexibility, down to rules for */ 622 /* single glyphs in fonts, but also very slow. Its experimental and */ 623 /* slow nature and the original developer losing interest meant that */ 624 /* this option was never enabled in default builds. */ 625 /* */ 626 /* The corresponding interpreter version is v38. */ 627 /* */ 628 /* Value 2: */ 629 /* The new default mode for the TrueType driver. The Infinality code */ 630 /* base was stripped to the bare minimum and all configurability */ 631 /* removed in the name of speed and simplicity. The configurability */ 632 /* was mainly aimed at legacy fonts like Arial, Times New Roman, or */ 633 /* Courier. Legacy fonts are fonts that modify vertical stems to */ 634 /* achieve clean black-and-white bitmaps. The new mode focuses on */ 635 /* applying a minimal set of rules to all fonts indiscriminately so */ 636 /* that modern and web fonts render well while legacy fonts render */ 637 /* okay. */ 638 /* */ 639 /* The corresponding interpreter version is v40. */ 640 /* */ 641 /* Value 3: */ 642 /* Compile both, making both v38 and v40 available (the latter is the */ 643 /* default). */ 644 /* */ 645 /* By undefining these, you get rendering behavior like on Windows */ 646 /* without ClearType, i.e., Windows XP without ClearType enabled and */ 647 /* Win9x (interpreter version v35). Or not, depending on how much */ 648 /* hinting blood and testing tears the font designer put into a given */ 649 /* font. If you define one or both subpixel hinting options, you can */ 650 /* switch between between v35 and the ones you define (using */ 651 /* `FT_Property_Set'). */ 652 /* */ 653 /* This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be */ 654 /* defined. */ 655 /* */ 656 /* [1] https://www.microsoft.com/typography/cleartype/truetypecleartype.aspx */ 657 /* */ 658 /* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING 1 */ 659 #define TT_CONFIG_OPTION_SUBPIXEL_HINTING 2 660 /* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING ( 1 | 2 ) */ 661 662 663 /*************************************************************************/ 664 /* */ 665 /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the */ 666 /* TrueType glyph loader to use Apple's definition of how to handle */ 667 /* component offsets in composite glyphs. */ 668 /* */ 669 /* Apple and MS disagree on the default behavior of component offsets */ 670 /* in composites. Apple says that they should be scaled by the scaling */ 671 /* factors in the transformation matrix (roughly, it's more complex) */ 672 /* while MS says they should not. OpenType defines two bits in the */ 673 /* composite flags array which can be used to disambiguate, but old */ 674 /* fonts will not have them. */ 675 /* */ 676 /* https://www.microsoft.com/typography/otspec/glyf.htm */ 677 /* https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6glyf.html */ 678 /* */ 679 #undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED 680 681 682 /*************************************************************************/ 683 /* */ 684 /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include */ 685 /* support for Apple's distortable font technology (fvar, gvar, cvar, */ 686 /* and avar tables). This has many similarities to Type 1 Multiple */ 687 /* Masters support. */ 688 /* */ 689 #define TT_CONFIG_OPTION_GX_VAR_SUPPORT 690 691 692 /*************************************************************************/ 693 /* */ 694 /* Define TT_CONFIG_OPTION_BDF if you want to include support for */ 695 /* an embedded `BDF ' table within SFNT-based bitmap formats. */ 696 /* */ 697 #define TT_CONFIG_OPTION_BDF 698 699 700 /*************************************************************************/ 701 /* */ 702 /* Option TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES controls the maximum */ 703 /* number of bytecode instructions executed for a single run of the */ 704 /* bytecode interpreter, needed to prevent infinite loops. You don't */ 705 /* want to change this except for very special situations (e.g., making */ 706 /* a library fuzzer spend less time to handle broken fonts). */ 707 /* */ 708 /* It is not expected that this value is ever modified by a configuring */ 709 /* script; instead, it gets surrounded with #ifndef ... #endif so that */ 710 /* the value can be set as a preprocessor option on the compiler's */ 711 /* command line. */ 712 /* */ 713 #ifndef TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES 714 #define TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES 1000000L 715 #endif 716 717 718 /*************************************************************************/ 719 /*************************************************************************/ 720 /**** ****/ 721 /**** T Y P E 1 D R I V E R C O N F I G U R A T I O N ****/ 722 /**** ****/ 723 /*************************************************************************/ 724 /*************************************************************************/ 725 726 727 /*************************************************************************/ 728 /* */ 729 /* T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and */ 730 /* arrays in the Type 1 stream (see t1load.c). A minimum of 4 is */ 731 /* required. */ 732 /* */ 733 #define T1_MAX_DICT_DEPTH 5 734 735 736 /*************************************************************************/ 737 /* */ 738 /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine */ 739 /* calls during glyph loading. */ 740 /* */ 741 #define T1_MAX_SUBRS_CALLS 16 742 743 744 /*************************************************************************/ 745 /* */ 746 /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A */ 747 /* minimum of 16 is required. */ 748 /* */ 749 /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */ 750 /* */ 751 #define T1_MAX_CHARSTRINGS_OPERANDS 256 752 753 754 /*************************************************************************/ 755 /* */ 756 /* Define this configuration macro if you want to prevent the */ 757 /* compilation of `t1afm', which is in charge of reading Type 1 AFM */ 758 /* files into an existing face. Note that if set, the T1 driver will be */ 759 /* unable to produce kerning distances. */ 760 /* */ 761 #undef T1_CONFIG_OPTION_NO_AFM 762 763 764 /*************************************************************************/ 765 /* */ 766 /* Define this configuration macro if you want to prevent the */ 767 /* compilation of the Multiple Masters font support in the Type 1 */ 768 /* driver. */ 769 /* */ 770 #undef T1_CONFIG_OPTION_NO_MM_SUPPORT 771 772 773 /*************************************************************************/ 774 /* */ 775 /* T1_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe Type 1 */ 776 /* engine gets compiled into FreeType. If defined, it is possible to */ 777 /* switch between the two engines using the `hinting-engine' property of */ 778 /* the type1 driver module. */ 779 /* */ 780 /* #define T1_CONFIG_OPTION_OLD_ENGINE */ 781 782 783 /*************************************************************************/ 784 /*************************************************************************/ 785 /**** ****/ 786 /**** C F F D R I V E R C O N F I G U R A T I O N ****/ 787 /**** ****/ 788 /*************************************************************************/ 789 /*************************************************************************/ 790 791 792 /*************************************************************************/ 793 /* */ 794 /* Using CFF_CONFIG_OPTION_DARKENING_PARAMETER_{X,Y}{1,2,3,4} it is */ 795 /* possible to set up the default values of the four control points that */ 796 /* define the stem darkening behaviour of the (new) CFF engine. For */ 797 /* more details please read the documentation of the */ 798 /* `darkening-parameters' property (file `ftdriver.h'), which allows the */ 799 /* control at run-time. */ 800 /* */ 801 /* Do *not* undefine these macros! */ 802 /* */ 803 #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 500 804 #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 400 805 806 #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 1000 807 #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 275 808 809 #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 1667 810 #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 275 811 812 #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 2333 813 #define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 0 814 815 816 /*************************************************************************/ 817 /* */ 818 /* CFF_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe CFF */ 819 /* engine gets compiled into FreeType. If defined, it is possible to */ 820 /* switch between the two engines using the `hinting-engine' property of */ 821 /* the cff driver module. */ 822 /* */ 823 /* #define CFF_CONFIG_OPTION_OLD_ENGINE */ 824 825 826 /*************************************************************************/ 827 /*************************************************************************/ 828 /**** ****/ 829 /**** P C F D R I V E R C O N F I G U R A T I O N ****/ 830 /**** ****/ 831 /*************************************************************************/ 832 /*************************************************************************/ 833 834 835 /*************************************************************************/ 836 /* */ 837 /* There are many PCF fonts just called `Fixed' which look completely */ 838 /* different, and which have nothing to do with each other. When */ 839 /* selecting `Fixed' in KDE or Gnome one gets results that appear rather */ 840 /* random, the style changes often if one changes the size and one */ 841 /* cannot select some fonts at all. This option makes the PCF module */ 842 /* prepend the foundry name (plus a space) to the family name. */ 843 /* */ 844 /* We also check whether we have `wide' characters; all put together, we */ 845 /* get family names like `Sony Fixed' or `Misc Fixed Wide'. */ 846 /* */ 847 /* If this option is activated, it can be controlled with the */ 848 /* `no-long-family-names' property of the pcf driver module. */ 849 /* */ 850 /* #define PCF_CONFIG_OPTION_LONG_FAMILY_NAMES */ 851 852 853 /*************************************************************************/ 854 /*************************************************************************/ 855 /**** ****/ 856 /**** A U T O F I T M O D U L E C O N F I G U R A T I O N ****/ 857 /**** ****/ 858 /*************************************************************************/ 859 /*************************************************************************/ 860 861 862 /*************************************************************************/ 863 /* */ 864 /* Compile autofit module with CJK (Chinese, Japanese, Korean) script */ 865 /* support. */ 866 /* */ 867 #define AF_CONFIG_OPTION_CJK 868 869 /*************************************************************************/ 870 /* */ 871 /* Compile autofit module with fallback Indic script support, covering */ 872 /* some scripts that the `latin' submodule of the autofit module doesn't */ 873 /* (yet) handle. */ 874 /* */ 875 #define AF_CONFIG_OPTION_INDIC 876 877 /*************************************************************************/ 878 /* */ 879 /* Compile autofit module with warp hinting. The idea of the warping */ 880 /* code is to slightly scale and shift a glyph within a single dimension */ 881 /* so that as much of its segments are aligned (more or less) on the */ 882 /* grid. To find out the optimal scaling and shifting value, various */ 883 /* parameter combinations are tried and scored. */ 884 /* */ 885 /* This experimental option is active only if the rendering mode is */ 886 /* FT_RENDER_MODE_LIGHT; you can switch warping on and off with the */ 887 /* `warping' property of the auto-hinter (see file `ftdriver.h' for more */ 888 /* information; by default it is switched off). */ 889 /* */ 890 #define AF_CONFIG_OPTION_USE_WARPER 891 892 /*************************************************************************/ 893 /* */ 894 /* Use TrueType-like size metrics for `light' auto-hinting. */ 895 /* */ 896 /* It is strongly recommended to avoid this option, which exists only to */ 897 /* help some legacy applications retain its appearance and behaviour */ 898 /* with respect to auto-hinted TrueType fonts. */ 899 /* */ 900 /* The very reason this option exists at all are GNU/Linux distributions */ 901 /* like Fedora that did not un-patch the following change (which was */ 902 /* present in FreeType between versions 2.4.6 and 2.7.1, inclusive). */ 903 /* */ 904 /* 2011-07-16 Steven Chu <steven.f.chu@gmail.com> */ 905 /* */ 906 /* [truetype] Fix metrics on size request for scalable fonts. */ 907 /* */ 908 /* This problematic commit is now reverted (more or less). */ 909 /* */ 910 /* #define AF_CONFIG_OPTION_TT_SIZE_METRICS */ 911 912 /* */ 913 914 915 /* 916 * This macro is obsolete. Support has been removed in FreeType 917 * version 2.5. 918 */ 919 /* #define FT_CONFIG_OPTION_OLD_INTERNALS */ 920 921 922 /* 923 * This macro is defined if native TrueType hinting is requested by the 924 * definitions above. 925 */ 926 #ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER 927 #define TT_USE_BYTECODE_INTERPRETER 928 929 #ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING 930 #if TT_CONFIG_OPTION_SUBPIXEL_HINTING & 1 931 #define TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY 932 #endif 933 934 #if TT_CONFIG_OPTION_SUBPIXEL_HINTING & 2 935 #define TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL 936 #endif 937 #endif 938 #endif 939 940 941 /* 942 * Check CFF darkening parameters. The checks are the same as in function 943 * `cff_property_set' in file `cffdrivr.c'. 944 */ 945 #if CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 < 0 || \ 946 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 < 0 || \ 947 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 < 0 || \ 948 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 < 0 || \ 949 \ 950 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 < 0 || \ 951 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 < 0 || \ 952 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 < 0 || \ 953 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 < 0 || \ 954 \ 955 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 > \ 956 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 || \ 957 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 > \ 958 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 || \ 959 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 > \ 960 CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 || \ 961 \ 962 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 > 500 || \ 963 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 > 500 || \ 964 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 > 500 || \ 965 CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 > 500 966 #error "Invalid CFF darkening parameters!" 967 #endif 968 969 FT_END_HEADER 970