1ChangeLog for hostapd 2 32019-08-07 - v2.9 4 * SAE changes 5 - disable use of groups using Brainpool curves 6 - improved protection against side channel attacks 7 [https://w1.fi/security/2019-6/] 8 * EAP-pwd changes 9 - disable use of groups using Brainpool curves 10 - improved protection against side channel attacks 11 [https://w1.fi/security/2019-6/] 12 * fixed FT-EAP initial mobility domain association using PMKSA caching 13 * added configuration of airtime policy 14 * fixed FILS to and RSNE into (Re)Association Response frames 15 * fixed DPP bootstrapping URI parser of channel list 16 * added support for regulatory WMM limitation (for ETSI) 17 * added support for MACsec Key Agreement using IEEE 802.1X/PSK 18 * added experimental support for EAP-TEAP server (RFC 7170) 19 * added experimental support for EAP-TLS server with TLS v1.3 20 * added support for two server certificates/keys (RSA/ECC) 21 * added AKMSuiteSelector into "STA <addr>" control interface data to 22 determine with AKM was used for an association 23 * added eap_sim_id parameter to allow EAP-SIM/AKA server pseudonym and 24 fast reauthentication use to be disabled 25 * fixed an ECDH operation corner case with OpenSSL 26 272019-04-21 - v2.8 28 * SAE changes 29 - added support for SAE Password Identifier 30 - changed default configuration to enable only group 19 31 (i.e., disable groups 20, 21, 25, 26 from default configuration) and 32 disable all unsuitable groups completely based on REVmd changes 33 - improved anti-clogging token mechanism and SAE authentication 34 frame processing during heavy CPU load; this mitigates some issues 35 with potential DoS attacks trying to flood an AP with large number 36 of SAE messages 37 - added Finite Cyclic Group field in status code 77 responses 38 - reject use of unsuitable groups based on new implementation guidance 39 in REVmd (allow only FFC groups with prime >= 3072 bits and ECC 40 groups with prime >= 256) 41 - minimize timing and memory use differences in PWE derivation 42 [https://w1.fi/security/2019-1/] (CVE-2019-9494) 43 - fixed confirm message validation in error cases 44 [https://w1.fi/security/2019-3/] (CVE-2019-9496) 45 * EAP-pwd changes 46 - minimize timing and memory use differences in PWE derivation 47 [https://w1.fi/security/2019-2/] (CVE-2019-9495) 48 - verify peer scalar/element 49 [https://w1.fi/security/2019-4/] (CVE-2019-9497 and CVE-2019-9498) 50 - fix message reassembly issue with unexpected fragment 51 [https://w1.fi/security/2019-5/] 52 - enforce rand,mask generation rules more strictly 53 - fix a memory leak in PWE derivation 54 - disallow ECC groups with a prime under 256 bits (groups 25, 26, and 55 27) 56 * Hotspot 2.0 changes 57 - added support for release number 3 58 - reject release 2 or newer association without PMF 59 * added support for RSN operating channel validation 60 (CONFIG_OCV=y and configuration parameter ocv=1) 61 * added Multi-AP protocol support 62 * added FTM responder configuration 63 * fixed build with LibreSSL 64 * added FT/RRB workaround for short Ethernet frame padding 65 * fixed KEK2 derivation for FILS+FT 66 * added RSSI-based association rejection from OCE 67 * extended beacon reporting functionality 68 * VLAN changes 69 - allow local VLAN management with remote RADIUS authentication 70 - add WPA/WPA2 passphrase/PSK -based VLAN assignment 71 * OpenSSL: allow systemwide policies to be overridden 72 * extended PEAP to derive EMSK to enable use with ERP/FILS 73 * extended WPS to allow SAE configuration to be added automatically 74 for PSK (wps_cred_add_sae=1) 75 * fixed FT and SA Query Action frame with AP-MLME-in-driver cases 76 * OWE: allow Diffie-Hellman Parameter element to be included with DPP 77 in preparation for DPP protocol extension 78 * RADIUS server: started to accept ERP keyName-NAI as user identity 79 automatically without matching EAP database entry 80 * fixed PTK rekeying with FILS and FT 81 822018-12-02 - v2.7 83 * fixed WPA packet number reuse with replayed messages and key 84 reinstallation 85 [http://w1.fi/security/2017-1/] (CVE-2017-13082) 86 * added support for FILS (IEEE 802.11ai) shared key authentication 87 * added support for OWE (Opportunistic Wireless Encryption, RFC 8110; 88 and transition mode defined by WFA) 89 * added support for DPP (Wi-Fi Device Provisioning Protocol) 90 * FT: 91 - added local generation of PMK-R0/PMK-R1 for FT-PSK 92 (ft_psk_generate_local=1) 93 - replaced inter-AP protocol with a cleaner design that is more 94 easily extensible; this breaks backward compatibility and requires 95 all APs in the ESS to be updated at the same time to maintain FT 96 functionality 97 - added support for wildcard R0KH/R1KH 98 - replaced r0_key_lifetime (minutes) parameter with 99 ft_r0_key_lifetime (seconds) 100 - fixed wpa_psk_file use for FT-PSK 101 - fixed FT-SAE PMKID matching 102 - added expiration to PMK-R0 and PMK-R1 cache 103 - added IEEE VLAN support (including tagged VLANs) 104 - added support for SHA384 based AKM 105 * SAE 106 - fixed some PMKSA caching cases with SAE 107 - added support for configuring SAE password separately of the 108 WPA2 PSK/passphrase 109 - added option to require MFP for SAE associations 110 (sae_require_pmf=1) 111 - fixed PTK and EAPOL-Key integrity and key-wrap algorithm selection 112 for SAE; 113 note: this is not backwards compatible, i.e., both the AP and 114 station side implementations will need to be update at the same 115 time to maintain interoperability 116 - added support for Password Identifier 117 * hostapd_cli: added support for command history and completion 118 * added support for requesting beacon report 119 * large number of other fixes, cleanup, and extensions 120 * added option to configure EAPOL-Key retry limits 121 (wpa_group_update_count and wpa_pairwise_update_count) 122 * removed all PeerKey functionality 123 * fixed nl80211 AP mode configuration regression with Linux 4.15 and 124 newer 125 * added support for using wolfSSL cryptographic library 126 * fixed some 20/40 MHz coexistence cases where the BSS could drop to 127 20 MHz even when 40 MHz would be allowed 128 * Hotspot 2.0 129 - added support for setting Venue URL ANQP-element (venue_url) 130 - added support for advertising Hotspot 2.0 operator icons 131 - added support for Roaming Consortium Selection element 132 - added support for Terms and Conditions 133 - added support for OSEN connection in a shared RSN BSS 134 * added support for using OpenSSL 1.1.1 135 * added EAP-pwd server support for salted passwords 136 1372016-10-02 - v2.6 138 * fixed EAP-pwd last fragment validation 139 [http://w1.fi/security/2015-7/] (CVE-2015-5314) 140 * fixed WPS configuration update vulnerability with malformed passphrase 141 [http://w1.fi/security/2016-1/] (CVE-2016-4476) 142 * extended channel switch support for VHT bandwidth changes 143 * added support for configuring new ANQP-elements with 144 anqp_elem=<InfoID>:<hexdump of payload> 145 * fixed Suite B 192-bit AKM to use proper PMK length 146 (note: this makes old releases incompatible with the fixed behavior) 147 * added no_probe_resp_if_max_sta=1 parameter to disable Probe Response 148 frame sending for not-associated STAs if max_num_sta limit has been 149 reached 150 * added option (-S as command line argument) to request all interfaces 151 to be started at the same time 152 * modified rts_threshold and fragm_threshold configuration parameters 153 to allow -1 to be used to disable RTS/fragmentation 154 * EAP-pwd: added support for Brainpool Elliptic Curves 155 (with OpenSSL 1.0.2 and newer) 156 * fixed EAPOL reauthentication after FT protocol run 157 * fixed FTIE generation for 4-way handshake after FT protocol run 158 * fixed and improved various FST operations 159 * TLS server 160 - support SHA384 and SHA512 hashes 161 - support TLS v1.2 signature algorithm with SHA384 and SHA512 162 - support PKCS #5 v2.0 PBES2 163 - support PKCS #5 with PKCS #12 style key decryption 164 - minimal support for PKCS #12 165 - support OCSP stapling (including ocsp_multi) 166 * added support for OpenSSL 1.1 API changes 167 - drop support for OpenSSL 0.9.8 168 - drop support for OpenSSL 1.0.0 169 * EAP-PEAP: support fast-connect crypto binding 170 * RADIUS 171 - fix Called-Station-Id to not escape SSID 172 - add Event-Timestamp to all Accounting-Request packets 173 - add Acct-Session-Id to Accounting-On/Off 174 - add Acct-Multi-Session-Id ton Access-Request packets 175 - add Service-Type (= Frames) 176 - allow server to provide PSK instead of passphrase for WPA-PSK 177 Tunnel_password case 178 - update full message for interim accounting updates 179 - add Acct-Delay-Time into Accounting messages 180 - add require_message_authenticator configuration option to require 181 CoA/Disconnect-Request packets to be authenticated 182 * started to postpone WNM-Notification frame sending by 100 ms so that 183 the STA has some more time to configure the key before this frame is 184 received after the 4-way handshake 185 * VHT: added interoperability workaround for 80+80 and 160 MHz channels 186 * extended VLAN support (per-STA vif, etc.) 187 * fixed PMKID derivation with SAE 188 * nl80211 189 - added support for full station state operations 190 - fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use 191 unencrypted EAPOL frames 192 * added initial MBO support; number of extensions to WNM BSS Transition 193 Management 194 * added initial functionality for location related operations 195 * added assocresp_elements parameter to allow vendor specific elements 196 to be added into (Re)Association Response frames 197 * improved Public Action frame addressing 198 - use Address 3 = wildcard BSSID in GAS response if a query from an 199 unassociated STA used that address 200 - fix TX status processing for Address 3 = wildcard BSSID 201 - add gas_address3 configuration parameter to control Address 3 202 behavior 203 * added command line parameter -i to override interface parameter in 204 hostapd.conf 205 * added command completion support to hostapd_cli 206 * added passive client taxonomy determination (CONFIG_TAXONOMY=y 207 compile option and "SIGNATURE <addr>" control interface command) 208 * number of small fixes 209 2102015-09-27 - v2.5 211 * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding 212 [http://w1.fi/security/2015-2/] (CVE-2015-4141) 213 * fixed WMM Action frame parser 214 [http://w1.fi/security/2015-3/] (CVE-2015-4142) 215 * fixed EAP-pwd server missing payload length validation 216 [http://w1.fi/security/2015-4/] 217 (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145) 218 * fixed validation of WPS and P2P NFC NDEF record payload length 219 [http://w1.fi/security/2015-5/] 220 * nl80211: 221 - fixed vendor command handling to check OUI properly 222 * fixed hlr_auc_gw build with OpenSSL 223 * hlr_auc_gw: allow Milenage RES length to be reduced 224 * disable HT for a station that does not support WMM/QoS 225 * added support for hashed password (NtHash) in EAP-pwd server 226 * fixed and extended dynamic VLAN cases 227 * added EAP-EKE server support for deriving Session-Id 228 * set Acct-Session-Id to a random value to make it more likely to be 229 unique even if the device does not have a proper clock 230 * added more 2.4 GHz channels for 20/40 MHz HT co-ex scan 231 * modified SAE routines to be more robust and PWE generation to be 232 stronger against timing attacks 233 * added support for Brainpool Elliptic Curves with SAE 234 * increases maximum value accepted for cwmin/cwmax 235 * added support for CCMP-256 and GCMP-256 as group ciphers with FT 236 * added Fast Session Transfer (FST) module 237 * removed optional fields from RSNE when using FT with PMF 238 (workaround for interoperability issues with iOS 8.4) 239 * added EAP server support for TLS session resumption 240 * fixed key derivation for Suite B 192-bit AKM (this breaks 241 compatibility with the earlier version) 242 * added mechanism to track unconnected stations and do minimal band 243 steering 244 * number of small fixes 245 2462015-03-15 - v2.4 247 * allow OpenSSL cipher configuration to be set for internal EAP server 248 (openssl_ciphers parameter) 249 * fixed number of small issues based on hwsim test case failures and 250 static analyzer reports 251 * fixed Accounting-Request to not include duplicated Acct-Session-Id 252 * add support for Acct-Multi-Session-Id in RADIUS Accounting messages 253 * add support for PMKSA caching with SAE 254 * add support for generating BSS Load element (bss_load_update_period) 255 * fixed channel switch from VHT to HT 256 * add INTERFACE-ENABLED and INTERFACE-DISABLED ctrl_iface events 257 * add support for learning STA IPv4/IPv6 addresses and configuring 258 ProxyARP support 259 * dropped support for the madwifi driver interface 260 * add support for Suite B (128-bit and 192-bit level) key management and 261 cipher suites 262 * fixed a regression with driver=wired 263 * extend EAPOL-Key msg 1/4 retry workaround for changing SNonce 264 * add BSS_TM_REQ ctrl_iface command to send BSS Transition Management 265 Request frames and BSS-TM-RESP event to indicate response to such 266 frame 267 * add support for EAP Re-Authentication Protocol (ERP) 268 * fixed AP IE in EAPOL-Key 3/4 when both WPA and FT was enabled 269 * fixed a regression in HT 20/40 coex Action frame parsing 270 * set stdout to be line-buffered 271 * add support for vendor specific VHT extension to enable 256 QAM rates 272 (VHT-MCS 8 and 9) on 2.4 GHz band 273 * RADIUS DAS: 274 - extend Disconnect-Request processing to allow matching of multiple 275 sessions 276 - support Acct-Multi-Session-Id as an identifier 277 - allow PMKSA cache entry to be removed without association 278 * expire hostapd STA entry if kernel does not have a matching entry 279 * allow chanlist to be used to specify a subset of channels for ACS 280 * improve ACS behavior on 2.4 GHz band and allow channel bias to be 281 configured with acs_chan_bias parameter 282 * do not reply to a Probe Request frame that includes DSS Parameter Set 283 element in which the channel does not match the current operating 284 channel 285 * add UPDATE_BEACON ctrl_iface command; this can be used to force Beacon 286 frame contents to be updated and to start beaconing on an interface 287 that used start_disabled=1 288 * fixed some RADIUS server failover cases 289 2902014-10-09 - v2.3 291 * fixed number of minor issues identified in static analyzer warnings 292 * fixed DFS and channel switch operation for multi-BSS cases 293 * started to use constant time comparison for various password and hash 294 values to reduce possibility of any externally measurable timing 295 differences 296 * extended explicit clearing of freed memory and expired keys to avoid 297 keeping private data in memory longer than necessary 298 * added support for number of new RADIUS attributes from RFC 7268 299 (Mobility-Domain-Id, WLAN-HESSID, WLAN-Pairwise-Cipher, 300 WLAN-Group-Cipher, WLAN-AKM-Suite, WLAN-Group-Mgmt-Pairwise-Cipher) 301 * fixed GET_CONFIG wpa_pairwise_cipher value 302 * added code to clear bridge FDB entry on station disconnection 303 * fixed PMKSA cache timeout from Session-Timeout for WPA/WPA2 cases 304 * fixed OKC PMKSA cache entry fetch to avoid a possible infinite loop 305 in case the first entry does not match 306 * fixed hostapd_cli action script execution to use more robust mechanism 307 (CVE-2014-3686) 308 3092014-06-04 - v2.2 310 * fixed SAE confirm-before-commit validation to avoid a potential 311 segmentation fault in an unexpected message sequence that could be 312 triggered remotely 313 * extended VHT support 314 - Operating Mode Notification 315 - Power Constraint element (local_pwr_constraint) 316 - Spectrum management capability (spectrum_mgmt_required=1) 317 - fix VHT80 segment picking in ACS 318 - fix vht_capab 'Maximum A-MPDU Length Exponent' handling 319 - fix VHT20 320 * fixed HT40 co-ex scan for some pri/sec channel switches 321 * extended HT40 co-ex support to allow dynamic channel width changes 322 during the lifetime of the BSS 323 * fixed HT40 co-ex support to check for overlapping 20 MHz BSS 324 * fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding; 325 this fixes password with include UTF-8 characters that use 326 three-byte encoding EAP methods that use NtPasswordHash 327 * reverted TLS certificate validation step change in v2.1 that rejected 328 any AAA server certificate with id-kp-clientAuth even if 329 id-kp-serverAuth EKU was included 330 * fixed STA validation step for WPS ER commands to prevent a potential 331 crash if an ER sends an unexpected PutWLANResponse to a station that 332 is disassociated, but not fully removed 333 * enforce full EAP authentication after RADIUS Disconnect-Request by 334 removing the PMKSA cache entry 335 * added support for NAS-IP-Address, NAS-identifier, and NAS-IPv6-Address 336 in RADIUS Disconnect-Request 337 * added mechanism for removing addresses for MAC ACLs by prefixing an 338 entry with "-" 339 * Interworking/Hotspot 2.0 enhancements 340 - support Hotspot 2.0 Release 2 341 * OSEN network for online signup connection 342 * subscription remediation (based on RADIUS server request or 343 control interface HS20_WNM_NOTIF for testing purposes) 344 * Hotspot 2.0 release number indication in WFA RADIUS VSA 345 * deauthentication request (based on RADIUS server request or 346 control interface WNM_DEAUTH_REQ for testing purposes) 347 * Session Info URL RADIUS AVP to trigger ESS Disassociation Imminent 348 * hs20_icon config parameter to configure icon files for OSU 349 * osu_* config parameters for OSU Providers list 350 - do not use Interworking filtering rules on Probe Request if 351 Interworking is disabled to avoid interop issues 352 * added/fixed nl80211 functionality 353 - AP interface teardown optimization 354 - support vendor specific driver command 355 (VENDOR <vendor id> <sub command id> [<hex formatted data>]) 356 * fixed PMF protection of Deauthentication frame when this is triggered 357 by session timeout 358 * internal TLS implementation enhancements/fixes 359 - add SHA256-based cipher suites 360 - add DHE-RSA cipher suites 361 - fix X.509 validation of PKCS#1 signature to check for extra data 362 * RADIUS server functionality 363 - add minimal RADIUS accounting server support (hostapd-as-server); 364 this is mainly to enable testing coverage with hwsim scripts 365 - allow authentication log to be written into SQLite database 366 - added option for TLS protocol testing of an EAP peer by simulating 367 various misbehaviors/known attacks 368 - MAC ACL support for testing purposes 369 * fixed PTK derivation for CCMP-256 and GCMP-256 370 * extended WPS per-station PSK to support ER case 371 * added option to configure the management group cipher 372 (group_mgmt_cipher=AES-128-CMAC (default), BIP-GMAC-128, BIP-GMAC-256, 373 BIP-CMAC-256) 374 * fixed AP mode default TXOP Limit values for AC_VI and AC_VO (these 375 were rounded incorrectly) 376 * added support for postponing FT response in case PMK-R1 needs to be 377 pulled from R0KH 378 * added option to advertise 40 MHz intolerant HT capability with 379 ht_capab=[40-INTOLERANT] 380 * remove WPS 1.0 only support, i.e., WSC 2.0 support is now enabled 381 whenever CONFIG_WPS=y is set 382 * EAP-pwd fixes 383 - fix possible segmentation fault on EAP method deinit if an invalid 384 group is negotiated 385 * fixed RADIUS client retransmit/failover behavior 386 - there was a potential ctash due to freed memory being accessed 387 - failover to a backup server mechanism did not work properly 388 * fixed a possible crash on double DISABLE command when multiple BSSes 389 are enabled 390 * fixed a memory leak in SAE random number generation 391 * fixed GTK rekeying when the station uses FT protocol 392 * fixed off-by-one bounds checking in printf_encode() 393 - this could result in deinial of service in some EAP server cases 394 * various bug fixes 395 3962014-02-04 - v2.1 397 * added support for simultaneous authentication of equals (SAE) for 398 stronger password-based authentication with WPA2-Personal 399 * added nl80211 functionality 400 - VHT configuration for nl80211 401 - support split wiphy dump 402 - driver-based MAC ACL 403 - QoS Mapping configuration 404 * added fully automated regression testing with mac80211_hwsim 405 * allow ctrl_iface group to be specified on command line (-G<group>) 406 * allow single hostapd process to control independent WPS interfaces 407 (wps_independent=1) instead of synchronized operations through all 408 configured interfaces within a process 409 * avoid processing received management frames multiple times when using 410 nl80211 with multiple BSSes 411 * added support for DFS (processing radar detection events, CAC, channel 412 re-selection) 413 * added EAP-EKE server 414 * added automatic channel selection (ACS) 415 * added option for using per-BSS (vif) configuration files with 416 -b<phyname>:<config file name> 417 * extended global control interface ADD/REMOVE commands to allow BSSes 418 of a radio to be removed individually without having to add/remove all 419 other BSSes of the radio at the same time 420 * added support for sending debug info to Linux tracing (-T on command 421 line) 422 * replace dump_file functionality with same information being available 423 through the hostapd control interface 424 * added support for using Protected Dual of Public Action frames for 425 GAS/ANQP exchanges when PMF is enabled 426 * added support for WPS+NFC updates 427 - improved protocol 428 - option to fetch and report alternative carrier records for external 429 NFC operations 430 * various bug fixes 431 4322013-01-12 - v2.0 433 * added AP-STA-DISCONNECTED ctrl_iface event 434 * improved debug logging (human readable event names, interface name 435 included in more entries) 436 * added number of small changes to make it easier for static analyzers 437 to understand the implementation 438 * added a workaround for Windows 7 Michael MIC failure reporting and 439 use of the Secure bit in EAPOL-Key msg 3/4 440 * fixed number of small bugs (see git logs for more details) 441 * changed OpenSSL to read full certificate chain from server_cert file 442 * nl80211: number of updates to use new cfg80211/nl80211 functionality 443 - replace monitor interface with nl80211 commands 444 - additional information for driver-based AP SME 445 * EAP-pwd: 446 - fix KDF for group 21 and zero-padding 447 - added support for fragmentation 448 - increased maximum number of hunting-and-pecking iterations 449 * avoid excessive Probe Response retries for broadcast Probe Request 450 frames (only with drivers using hostapd SME/MLME) 451 * added preliminary support for using TLS v1.2 (CONFIG_TLSV12=y) 452 * fixed WPS operation stopping on dual concurrent AP 453 * added wps_rf_bands configuration parameter for overriding RF Bands 454 value for WPS 455 * added support for getting per-device PSK from RADIUS Tunnel-Password 456 * added support for libnl 3.2 and newer 457 * increased initial group key handshake retransmit timeout to 500 ms 458 * added a workaround for 4-way handshake to update SNonce even after 459 having sent EAPOL-Key 3/4 to avoid issues with some supplicant 460 implementations that can change SNonce for each EAP-Key 2/4 461 * added a workaround for EAPOL-Key 4/4 using incorrect type value in 462 WPA2 mode (some deployed stations use WPA type in that message) 463 * added a WPS workaround for mixed mode AP Settings with Windows 7 464 * changed WPS AP PIN disabling mechanism to disable the PIN after 10 465 consecutive failures in addition to using the exponential lockout 466 period 467 * added support for WFA Hotspot 2.0 468 - GAS/ANQP advertisement of network information 469 - disable_dgaf parameter to disable downstream group-addressed 470 forwarding 471 * simplified licensing terms by selecting the BSD license as the only 472 alternative 473 * EAP-SIM: fixed re-authentication not to update pseudonym 474 * EAP-SIM: use Notification round before EAP-Failure 475 * EAP-AKA: added support for AT_COUNTER_TOO_SMALL 476 * EAP-AKA: skip AKA/Identity exchange if EAP identity is recognized 477 * EAP-AKA': fixed identity for MK derivation 478 * EAP-AKA': updated to RFC 5448 (username prefixes changed); note: this 479 breaks interoperability with older versions 480 * EAP-SIM/AKA: allow pseudonym to be used after unknown reauth id 481 * changed ANonce to be a random number instead of Counter-based 482 * added support for canceling WPS operations with hostapd_cli wps_cancel 483 * fixed EAP/WPS to PSK transition on reassociation in cases where 484 deauthentication is missed 485 * hlr_auc_gw enhancements: 486 - a new command line parameter -u can be used to enable updating of 487 SQN in Milenage file 488 - use 5 bit IND for SQN updates 489 - SQLite database can now be used to store Milenage information 490 * EAP-SIM/AKA DB: added optional use of SQLite database for pseudonyms 491 and reauth data 492 * added support for Chargeable-User-Identity (RFC 4372) 493 * added radius_auth_req_attr and radius_acct_req_attr configuration 494 parameters to allow adding/overriding of RADIUS attributes in 495 Access-Request and Accounting-Request packets 496 * added support for RADIUS dynamic authorization server (RFC 5176) 497 * added initial support for WNM operations 498 - BSS max idle period 499 - WNM-Sleep Mode 500 * added new WPS NFC ctrl_iface mechanism 501 - removed obsoleted WPS_OOB command (including support for deprecated 502 UFD config_method) 503 * added FT support for drivers that implement MLME internally 504 * added SA Query support for drivers that implement MLME internally 505 * removed default ACM=1 from AC_VO and AC_VI 506 * changed VENDOR-TEST EAP method to use proper private enterprise number 507 (this will not interoperate with older versions) 508 * added hostapd.conf parameter vendor_elements to allow arbitrary vendor 509 specific elements to be added to the Beacon and Probe Response frames 510 * added support for configuring GCMP cipher for IEEE 802.11ad 511 * added support for 256-bit AES with internal TLS implementation 512 * changed EAPOL transmission to use AC_VO if WMM is active 513 * fixed EAP-TLS/PEAP/TTLS/FAST server to validate TLS Message Length 514 correctly; invalid messages could have caused the hostapd process to 515 terminate before this fix [CVE-2012-4445] 516 * limit number of active wildcard PINs for WPS Registrar to one to avoid 517 confusing behavior with multiple wildcard PINs 518 * added a workaround for WPS PBC session overlap detection to avoid 519 interop issues with deployed station implementations that do not 520 remove active PBC indication from Probe Request frames properly 521 * added support for using SQLite for the eap_user database 522 * added Acct-Session-Id attribute into Access-Request messages 523 * fixed EAPOL frame transmission to non-QoS STAs with nl80211 524 (do not send QoS frames if the STA did not negotiate use of QoS for 525 this association) 526 5272012-05-10 - v1.0 528 * Add channel selection support in hostapd. See hostapd.conf. 529 * Add support for IEEE 802.11v Time Advertisement mechanism with UTC 530 TSF offset. See hostapd.conf for config info. 531 * Delay STA entry removal until Deauth/Disassoc TX status in AP mode. 532 This allows the driver to use PS buffering of Deauthentication and 533 Disassociation frames when the STA is in power save sleep. Only 534 available with drivers that provide TX status events for Deauth/ 535 Disassoc frames (nl80211). 536 * Allow PMKSA caching to be disabled on the Authenticator. See 537 hostap.conf config parameter disable_pmksa_caching. 538 * atheros: Add support for IEEE 802.11w configuration. 539 * bsd: Add support for setting HT values in IFM_MMASK. 540 * Allow client isolation to be configured with ap_isolate. Client 541 isolation can be used to prevent low-level bridging of frames 542 between associated stations in the BSS. By default, this bridging 543 is allowed. 544 * Allow coexistance of HT BSSes with WEP/TKIP BSSes. 545 * Add require_ht config parameter, which can be used to configure 546 hostapd to reject association with any station that does not support 547 HT PHY. 548 * Add support for writing debug log to a file using "-f" option. Also 549 add relog CLI command to re-open the log file. 550 * Add bridge handling for WDS STA interfaces. By default they are 551 added to the configured bridge of the AP interface (if present), 552 but the user can also specify a separate bridge using cli command 553 wds_bridge. 554 * hostapd_cli: 555 - Add wds_bridge command for specifying bridge for WDS STA 556 interfaces. 557 - Add relog command for reopening log file. 558 - Send AP-STA-DISCONNECTED event when an AP disconnects a station 559 due to inactivity. 560 - Add wps_config ctrl_interface command for configuring AP. This 561 command can be used to configure the AP using the internal WPS 562 registrar. It works in the same way as new AP settings received 563 from an ER. 564 - Many WPS/WPS ER commands - see WPS/WPS ER sections for details. 565 - Add command get version, that returns hostapd version string. 566 * WNM: Add BSS Transition Management Request for ESS Disassoc Imminent. 567 Use hostapd_cli ess_disassoc (STA addr) (URL) to send the 568 notification to the STA. 569 * Allow AP mode to disconnect STAs based on low ACK condition (when 570 the data connection is not working properly, e.g., due to the STA 571 going outside the range of the AP). Disabled by default, enable by 572 config option disassoc_low_ack. 573 * Add WPA_IGNORE_CONFIG_ERRORS build option to continue in case of bad 574 config file. 575 * WPS: 576 - Send AP Settings as a wrapped Credential attribute to ctrl_iface 577 in WPS-NEW-AP-SETTINGS. 578 - Dispatch more WPS events through hostapd ctrl_iface. 579 - Add mechanism for indicating non-standard WPS errors. 580 - Change concurrent radio AP to use only one WPS UPnP instance. 581 - Add wps_check_pin command for processing PIN from user input. 582 UIs can use this command to process a PIN entered by a user and to 583 validate the checksum digit (if present). 584 - Add hostap_cli get_config command to display current AP config. 585 - Add new hostapd_cli command, wps_ap_pin, to manage AP PIN at 586 runtime and support dynamic AP PIN management. 587 - Disable AP PIN after 10 consecutive failures. Slow down attacks 588 on failures up to 10. 589 - Allow AP to start in Enrollee mode without AP PIN for probing, 590 to be compatible with Windows 7. 591 - Add Config Error into WPS-FAIL events to provide more info 592 to the user on how to resolve the issue. 593 - When controlling multiple interfaces: 594 - apply WPS commands to all interfaces configured to use WPS 595 - apply WPS config changes to all interfaces that use WPS 596 - when an attack is detected on any interface, disable AP PIN on 597 all interfaces 598 * WPS ER: 599 - Show SetSelectedRegistrar events as ctrl_iface events. 600 - Add special AP Setup Locked mode to allow read only ER. 601 ap_setup_locked=2 can now be used to enable a special mode where 602 WPS ER can learn the current AP settings, but cannot change them. 603 * WPS 2.0: Add support for WPS 2.0 (CONFIG_WPS2) 604 - Add build option CONFIG_WPS_EXTENSIBILITY_TESTING to enable tool 605 for testing protocol extensibility. 606 - Add build option CONFIG_WPS_STRICT to allow disabling of WPS 607 workarounds. 608 - Add support for AuthorizedMACs attribute. 609 * TDLS: 610 - Allow TDLS use or TDLS channel switching in the BSS to be 611 prohibited in the BSS, using config params tdls_prohibit and 612 tdls_prohibit_chan_switch. 613 * EAP server: Add support for configuring fragment size (see 614 fragment_size in hostapd.conf). 615 * wlantest: Add a tool wlantest for IEEE802.11 protocol testing. 616 wlantest can be used to capture frames from a monitor interface 617 for realtime capturing or from pcap files for offline analysis. 618 * Interworking: Support added for 802.11u. Enable in .config with 619 CONFIG_INTERWORKING. See hostapd.conf for config parameters for 620 interworking. 621 * Android: Add build and runtime support for Android hostapd. 622 * Add a new debug message level for excessive information. Use 623 -ddd to enable. 624 * TLS: Add support for tls_disable_time_checks=1 in client mode. 625 * Internal TLS: 626 - Add support for TLS v1.1 (RFC 4346). Enable with build parameter 627 CONFIG_TLSV11. 628 - Add domainComponent parser for X.509 names 629 * Reorder some IEs to get closer to IEEE 802.11 standard. Move 630 WMM into end of Beacon, Probe Resp and (Re)Assoc Resp frames. 631 Move HT IEs to be later in (Re)Assoc Resp. 632 * Many bugfixes. 633 6342010-04-18 - v0.7.2 635 * fix WPS internal Registrar use when an external Registrar is also 636 active 637 * bsd: Cleaned up driver wrapper and added various low-level 638 configuration options 639 * TNC: fixed issues with fragmentation 640 * EAP-TNC: add Flags field into fragment acknowledgement (needed to 641 interoperate with other implementations; may potentially breaks 642 compatibility with older wpa_supplicant/hostapd versions) 643 * cleaned up driver wrapper API for multi-BSS operations 644 * nl80211: fix multi-BSS and VLAN operations 645 * fix number of issues with IEEE 802.11r/FT; this version is not 646 backwards compatible with old versions 647 * add SA Query Request processing in AP mode (IEEE 802.11w) 648 * fix IGTK PN in group rekeying (IEEE 802.11w) 649 * fix WPS PBC session overlap detection to use correct attribute 650 * hostapd_notif_Assoc() can now be called with all IEs to simplify 651 driver wrappers 652 * work around interoperability issue with some WPS External Registrar 653 implementations 654 * nl80211: fix WPS IE update 655 * hostapd_cli: add support for action script operations (run a script 656 on hostapd events) 657 * fix DH padding with internal crypto code (mainly, for WPS) 658 * fix WPS association with both WPS IE and WPA/RSN IE present with 659 driver wrappers that use hostapd MLME (e.g., nl80211) 660 6612010-01-16 - v0.7.1 662 * cleaned up driver wrapper API (struct wpa_driver_ops); the new API 663 is not fully backwards compatible, so out-of-tree driver wrappers 664 will need modifications 665 * cleaned up various module interfaces 666 * merge hostapd and wpa_supplicant developers' documentation into a 667 single document 668 * fixed HT Capabilities IE with nl80211 drivers 669 * moved generic AP functionality code into src/ap 670 * WPS: handle Selected Registrar as union of info from all Registrars 671 * remove obsolete Prism54.org driver wrapper 672 * added internal debugging mechanism with backtrace support and memory 673 allocation/freeing validation, etc. tests (CONFIG_WPA_TRACE=y) 674 * EAP-FAST server: piggyback Phase 2 start with the end of Phase 1 675 * WPS: add support for dynamically selecting whether to provision the 676 PSK as an ASCII passphrase or PSK 677 * added support for WDS (4-address frame) mode with per-station virtual 678 interfaces (wds_sta=1 in config file; only supported with 679 driver=nl80211 for now) 680 * fixed WPS Probe Request processing to handle missing required 681 attribute 682 * fixed PKCS#12 use with OpenSSL 1.0.0 683 * detect bridge interface automatically so that bridge parameter in 684 hostapd.conf becomes optional (though, it may now be used to 685 automatically add then WLAN interface into a bridge with 686 driver=nl80211) 687 6882009-11-21 - v0.7.0 689 * increased hostapd_cli ping interval to 5 seconds and made this 690 configurable with a new command line options (-G<seconds>) 691 * driver_nl80211: use Linux socket filter to improve performance 692 * added support for external Registrars with WPS (UPnP transport) 693 * 802.11n: scan for overlapping BSSes before starting 20/40 MHz channel 694 * driver_nl80211: fixed STA accounting data collection (TX/RX bytes 695 reported correctly; TX/RX packets not yet available from kernel) 696 * added support for WPS USBA out-of-band mechanism with USB Flash 697 Drives (UFD) (CONFIG_WPS_UFD=y) 698 * fixed EAPOL/EAP reauthentication when using an external RADIUS 699 authentication server 700 * fixed TNC with EAP-TTLS 701 * fixed IEEE 802.11r key derivation function to match with the standard 702 (note: this breaks interoperability with previous version) [Bug 303] 703 * fixed SHA-256 based key derivation function to match with the 704 standard when using CCMP (for IEEE 802.11r and IEEE 802.11w) 705 (note: this breaks interoperability with previous version) [Bug 307] 706 * added number of code size optimizations to remove unnecessary 707 functionality from the program binary based on build configuration 708 (part of this automatic; part configurable with CONFIG_NO_* build 709 options) 710 * use shared driver wrapper files with wpa_supplicant 711 * driver_nl80211: multiple updates to provide support for new Linux 712 nl80211/mac80211 functionality 713 * updated management frame protection to use IEEE Std 802.11w-2009 714 * fixed number of small WPS issues and added workarounds to 715 interoperate with common deployed broken implementations 716 * added some IEEE 802.11n co-existence rules to disable 40 MHz channels 717 or modify primary/secondary channels if needed based on neighboring 718 networks 719 * added support for NFC out-of-band mechanism with WPS 720 * added preliminary support for IEEE 802.11r RIC processing 721 7222009-01-06 - v0.6.7 723 * added support for Wi-Fi Protected Setup (WPS) 724 (hostapd can now be configured to act as an integrated WPS Registrar 725 and provision credentials for WPS Enrollees using PIN and PBC 726 methods; external wireless Registrar can configure the AP, but 727 external WLAN Manager Registrars are not supported); WPS support can 728 be enabled by adding CONFIG_WPS=y into .config and setting the 729 runtime configuration variables in hostapd.conf (see WPS section in 730 the example configuration file); new hostapd_cli commands wps_pin and 731 wps_pbc are used to configure WPS negotiation; see README-WPS for 732 more details 733 * added IEEE 802.11n HT capability configuration (ht_capab) 734 * added support for generating Country IE based on nl80211 regulatory 735 information (added if ieee80211d=1 in configuration) 736 * fixed WEP authentication (both Open System and Shared Key) with 737 mac80211 738 * added support for EAP-AKA' (draft-arkko-eap-aka-kdf) 739 * added support for using driver_test over UDP socket 740 * changed EAP-GPSK to use the IANA assigned EAP method type 51 741 * updated management frame protection to use IEEE 802.11w/D7.0 742 * fixed retransmission of EAP requests if no response is received 743 7442008-11-23 - v0.6.6 745 * added a new configuration option, wpa_ptk_rekey, that can be used to 746 enforce frequent PTK rekeying, e.g., to mitigate some attacks against 747 TKIP deficiencies 748 * updated OpenSSL code for EAP-FAST to use an updated version of the 749 session ticket overriding API that was included into the upstream 750 OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is 751 needed with that version anymore) 752 * changed channel flags configuration to read the information from 753 the driver (e.g., via driver_nl80211 when using mac80211) instead of 754 using hostapd as the source of the regulatory information (i.e., 755 information from CRDA is now used with mac80211); this allows 5 GHz 756 channels to be used with hostapd (if allowed in the current 757 regulatory domain) 758 * fixed EAP-TLS message processing for the last TLS message if it is 759 large enough to require fragmentation (e.g., if a large Session 760 Ticket data is included) 761 * fixed listen interval configuration for nl80211 drivers 762 7632008-11-01 - v0.6.5 764 * added support for SHA-256 as X.509 certificate digest when using the 765 internal X.509/TLSv1 implementation 766 * fixed EAP-FAST PAC-Opaque padding (0.6.4 broke this for some peer 767 identity lengths) 768 * fixed internal TLSv1 implementation for abbreviated handshake (used 769 by EAP-FAST server) 770 * added support for setting VLAN ID for STAs based on local MAC ACL 771 (accept_mac_file) as an alternative for RADIUS server-based 772 configuration 773 * updated management frame protection to use IEEE 802.11w/D6.0 774 (adds a new association ping to protect against unauthenticated 775 authenticate or (re)associate request frames dropping association) 776 * added support for using SHA256-based stronger key derivation for WPA2 777 (IEEE 802.11w) 778 * added new "driver wrapper" for RADIUS-only configuration 779 (driver=none in hostapd.conf; CONFIG_DRIVER_NONE=y in .config) 780 * fixed WPA/RSN IE validation to verify that the proto (WPA vs. WPA2) 781 is enabled in configuration 782 * changed EAP-FAST configuration to use separate fields for A-ID and 783 A-ID-Info (eap_fast_a_id_info) to allow A-ID to be set to a fixed 784 16-octet len binary value for better interoperability with some peer 785 implementations; eap_fast_a_id is now configured as a hex string 786 * driver_nl80211: Updated to match the current Linux mac80211 AP mode 787 configuration (wireless-testing.git and Linux kernel releases 788 starting from 2.6.29) 789 7902008-08-10 - v0.6.4 791 * added peer identity into EAP-FAST PAC-Opaque and skip Phase 2 792 Identity Request if identity is already known 793 * added support for EAP Sequences in EAP-FAST Phase 2 794 * added support for EAP-TNC (Trusted Network Connect) 795 (this version implements the EAP-TNC method and EAP-TTLS/EAP-FAST 796 changes needed to run two methods in sequence (IF-T) and the IF-IMV 797 and IF-TNCCS interfaces from TNCS) 798 * added support for optional cryptobinding with PEAPv0 799 * added fragmentation support for EAP-TNC 800 * added support for fragmenting EAP-TTLS/PEAP/FAST Phase 2 (tunneled) 801 data 802 * added support for opportunistic key caching (OKC) 803 8042008-02-22 - v0.6.3 805 * fixed Reassociation Response callback processing when using internal 806 MLME (driver_{hostap,nl80211,test}.c) 807 * updated FT support to use the latest draft, IEEE 802.11r/D9.0 808 * copy optional Proxy-State attributes into RADIUS response when acting 809 as a RADIUS authentication server 810 * fixed EAPOL state machine to handle a case in which no response is 811 received from the RADIUS authentication server; previous version 812 could have triggered a crash in some cases after a timeout 813 * fixed EAP-SIM/AKA realm processing to allow decorated usernames to 814 be used 815 * added a workaround for EAP-SIM/AKA peers that include incorrect null 816 termination in the username 817 * fixed EAP-SIM/AKA protected result indication to include AT_COUNTER 818 attribute in notification messages only when using fast 819 reauthentication 820 * fixed EAP-SIM Start response processing for fast reauthentication 821 case 822 * added support for pending EAP processing in EAP-{PEAP,TTLS,FAST} 823 phase 2 to allow EAP-SIM and EAP-AKA to be used as the Phase 2 method 824 8252008-01-01 - v0.6.2 826 * fixed EAP-SIM and EAP-AKA message parser to validate attribute 827 lengths properly to avoid potential crash caused by invalid messages 828 * added data structure for storing allocated buffers (struct wpabuf); 829 this does not affect hostapd usage, but many of the APIs changed 830 and various interfaces (e.g., EAP) is not compatible with old 831 versions 832 * added support for protecting EAP-AKA/Identity messages with 833 AT_CHECKCODE (optional feature in RFC 4187) 834 * added support for protected result indication with AT_RESULT_IND for 835 EAP-SIM and EAP-AKA (eap_sim_aka_result_ind=1) 836 * added support for configuring EAP-TTLS phase 2 non-EAP methods in 837 EAP server configuration; previously all four were enabled for every 838 phase 2 user, now all four are disabled by default and need to be 839 enabled with new method names TTLS-PAP, TTLS-CHAP, TTLS-MSCHAP, 840 TTLS-MSCHAPV2 841 * removed old debug printing mechanism and the related 'debug' 842 parameter in the configuration file; debug verbosity is now set with 843 -d (or -dd) command line arguments 844 * added support for EAP-IKEv2 (draft-tschofenig-eap-ikev2-15.txt); 845 only shared key/password authentication is supported in this version 846 8472007-11-24 - v0.6.1 848 * added experimental, integrated TLSv1 server implementation with the 849 needed X.509/ASN.1/RSA/bignum processing (this can be enabled by 850 setting CONFIG_TLS=internal and CONFIG_INTERNAL_LIBTOMMATH=y in 851 .config); this can be useful, e.g., if the target system does not 852 have a suitable TLS library and a minimal code size is required 853 * added support for EAP-FAST server method to the integrated EAP 854 server 855 * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest 856 draft (draft-ietf-emu-eap-gpsk-07.txt) 857 * added a new configuration parameter, rsn_pairwise, to allow different 858 pairwise cipher suites to be enabled for WPA and RSN/WPA2 859 (note: if wpa_pairwise differs from rsn_pairwise, the driver will 860 either need to support this or will have to use the WPA/RSN IEs from 861 hostapd; currently, the included madwifi and bsd driver interfaces do 862 not have support for this) 863 * updated FT support to use the latest draft, IEEE 802.11r/D8.0 864 8652007-05-28 - v0.6.0 866 * added experimental IEEE 802.11r/D6.0 support 867 * updated EAP-SAKE to RFC 4763 and the IANA-allocated EAP type 48 868 * updated EAP-PSK to use the IANA-allocated EAP type 47 869 * fixed EAP-PSK bit ordering of the Flags field 870 * fixed configuration reloading (SIGHUP) to re-initialize WPA PSKs 871 by reading wpa_psk_file [Bug 181] 872 * fixed EAP-TTLS AVP parser processing for too short AVP lengths 873 * fixed IPv6 connection to RADIUS accounting server 874 * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest 875 draft (draft-ietf-emu-eap-gpsk-04.txt) 876 * hlr_auc_gw: read GSM triplet file into memory and rotate through the 877 entries instead of only using the same three triplets every time 878 (this does not work properly with tests using multiple clients, but 879 provides bit better triplet data for testing a single client; anyway, 880 if a better quality triplets are needed, GSM-Milenage should be used 881 instead of hardcoded triplet file) 882 * fixed EAP-MSCHAPv2 server to use a space between S and M parameters 883 in Success Request [Bug 203] 884 * added support for sending EAP-AKA Notifications in error cases 885 * updated to use IEEE 802.11w/D2.0 for management frame protection 886 (still experimental) 887 * RADIUS server: added support for processing duplicate messages 888 (retransmissions from RADIUS client) by replying with the previous 889 reply 890 8912006-11-24 - v0.5.6 892 * added support for configuring and controlling multiple BSSes per 893 radio interface (bss=<ifname> in hostapd.conf); this is only 894 available with Devicescape and test driver interfaces 895 * fixed PMKSA cache update in the end of successful RSN 896 pre-authentication 897 * added support for dynamic VLAN configuration (i.e., selecting VLAN-ID 898 for each STA based on RADIUS Access-Accept attributes); this requires 899 VLAN support from the kernel driver/802.11 stack and this is 900 currently only available with Devicescape and test driver interfaces 901 * driver_madwifi: fixed configuration of unencrypted modes (plaintext 902 and IEEE 802.1X without WEP) 903 * removed STAKey handshake since PeerKey handshake has replaced it in 904 IEEE 802.11ma and there are no known deployments of STAKey 905 * updated EAP Generalized Pre-Shared Key (EAP-GPSK) to use the latest 906 draft (draft-ietf-emu-eap-gpsk-01.txt) 907 * added preliminary implementation of IEEE 802.11w/D1.0 (management 908 frame protection) 909 (Note: this requires driver support to work properly.) 910 (Note2: IEEE 802.11w is an unapproved draft and subject to change.) 911 * hlr_auc_gw: added support for GSM-Milenage (for EAP-SIM) 912 * hlr_auc_gw: added support for reading per-IMSI Milenage keys and 913 parameters from a text file to make it possible to implement proper 914 GSM/UMTS authentication server for multiple SIM/USIM cards using 915 EAP-SIM/EAP-AKA 916 * fixed session timeout processing with drivers that do not use 917 ieee802_11.c (e.g., madwifi) 918 9192006-08-27 - v0.5.5 920 * added 'hostapd_cli new_sta <addr>' command for adding a new STA into 921 hostapd (e.g., to initialize wired network authentication based on an 922 external signal) 923 * fixed hostapd to add PMKID KDE into 4-Way Handshake Message 1 when 924 using WPA2 even if PMKSA caching is not used 925 * added -P<pid file> argument for hostapd to write the current process 926 id into a file 927 * added support for RADIUS Authentication Server MIB (RFC 2619) 928 9292006-06-20 - v0.5.4 930 * fixed nt_password_hash build [Bug 144] 931 * added PeerKey handshake implementation for IEEE 802.11e 932 direct link setup (DLS) to replace STAKey handshake 933 * added support for EAP Generalized Pre-Shared Key (EAP-GPSK, 934 draft-clancy-emu-eap-shared-secret-00.txt) 935 * fixed a segmentation fault when RSN pre-authentication was completed 936 successfully [Bug 152] 937 9382006-04-27 - v0.5.3 939 * do not build nt_password_hash and hlr_auc_gw by default to avoid 940 requiring a TLS library for a successful build; these programs can be 941 build with 'make nt_password_hash' and 'make hlr_auc_gw' 942 * added a new configuration option, eapol_version, that can be used to 943 set EAPOL version to 1 (default is 2) to work around broken client 944 implementations that drop EAPOL frames which use version number 2 945 [Bug 89] 946 * added support for EAP-SAKE (no EAP method number allocated yet, so 947 this is using the same experimental type 255 as EAP-PSK) 948 * fixed EAP-MSCHAPv2 message length validation 949 9502006-03-19 - v0.5.2 951 * fixed stdarg use in hostapd_logger(): if both stdout and syslog 952 logging was enabled, hostapd could trigger a segmentation fault in 953 vsyslog on some CPU -- C library combinations 954 * moved HLR/AuC gateway implementation for EAP-SIM/AKA into an external 955 program to make it easier to use for implementing real SS7 gateway; 956 eap_sim_db is not anymore used as a file name for GSM authentication 957 triplets; instead, it is path to UNIX domain socket that will be used 958 to communicate with the external gateway program (e.g., hlr_auc_gw) 959 * added example HLR/AuC gateway implementation, hlr_auc_gw, that uses 960 local information (GSM authentication triplets from a text file and 961 hardcoded AKA authentication data); this can be used to test EAP-SIM 962 and EAP-AKA 963 * added Milenage algorithm (example 3GPP AKA algorithm) to hlr_auc_gw 964 to make it possible to test EAP-AKA with real USIM cards (this is 965 disabled by default; define AKA_USE_MILENAGE when building hlr_auc_gw 966 to enable this) 967 * driver_madwifi: added support for getting station RSN IE from 968 madwifi-ng svn r1453 and newer; this fixes RSN that was apparently 969 broken with earlier change (r1357) in the driver 970 * changed EAP method registration to use a dynamic list of methods 971 instead of a static list generated at build time 972 * fixed WPA message 3/4 not to encrypt Key Data field (WPA IE) 973 [Bug 125] 974 * added ap_max_inactivity configuration parameter 975 9762006-01-29 - v0.5.1 977 * driver_test: added better support for multiple APs and STAs by using 978 a directory with sockets that include MAC address for each device in 979 the name (test_socket=DIR:/tmp/test) 980 * added support for EAP expanded type (vendor specific EAP methods) 981 9822005-12-18 - v0.5.0 (beginning of 0.5.x development releases) 983 * added experimental STAKey handshake implementation for IEEE 802.11e 984 direct link setup (DLS); note: this is disabled by default in both 985 build and runtime configuration (can be enabled with CONFIG_STAKEY=y 986 and stakey=1) 987 * added support for EAP methods to use callbacks to external programs 988 by buffering a pending request and processing it after the EAP method 989 is ready to continue 990 * improved EAP-SIM database interface to allow external request to GSM 991 HLR/AuC without blocking hostapd process 992 * added support for using EAP-SIM pseudonyms and fast re-authentication 993 * added support for EAP-AKA in the integrated EAP authenticator 994 * added support for matching EAP identity prefixes (e.g., "1"*) in EAP 995 user database to allow EAP-SIM/AKA selection without extra roundtrip 996 for EAP-Nak negotiation 997 * added support for storing EAP user password as NtPasswordHash instead 998 of plaintext password when using MSCHAP or MSCHAPv2 for 999 authentication (hash:<16-octet hex value>); added nt_password_hash 1000 tool for hashing password to generate NtPasswordHash 1001 10022005-11-20 - v0.4.7 (beginning of 0.4.x stable releases) 1003 * driver_wired: fixed EAPOL sending to optionally use PAE group address 1004 as the destination instead of supplicant MAC address; this is 1005 disabled by default, but should be enabled with use_pae_group_addr=1 1006 in configuration file if the wired interface is used by only one 1007 device at the time (common switch configuration) 1008 * driver_madwifi: configure driver to use TKIP countermeasures in order 1009 to get correct behavior (IEEE 802.11 association failing; previously, 1010 association succeeded, but hostpad forced disassociation immediately) 1011 * driver_madwifi: added support for madwifi-ng 1012 10132005-10-27 - v0.4.6 1014 * added support for replacing user identity from EAP with RADIUS 1015 User-Name attribute from Access-Accept message, if that is included, 1016 for the RADIUS accounting messages (e.g., for EAP-PEAP/TTLS to get 1017 tunneled identity into accounting messages when the RADIUS server 1018 does not support better way of doing this with Class attribute) 1019 * driver_madwifi: fixed EAPOL packet receive for configuration where 1020 ath# is part of a bridge interface 1021 * added a configuration file and log analyzer script for logwatch 1022 * fixed EAPOL state machine step function to process all state 1023 transitions before processing new events; this resolves a race 1024 condition in which EAPOL-Start message could trigger hostapd to send 1025 two EAP-Response/Identity frames to the authentication server 1026 10272005-09-25 - v0.4.5 1028 * added client CA list to the TLS certificate request in order to make 1029 it easier for the client to select which certificate to use 1030 * added experimental support for EAP-PSK 1031 * added support for WE-19 (hostap, madwifi) 1032 10332005-08-21 - v0.4.4 1034 * fixed build without CONFIG_RSN_PREAUTH 1035 * fixed FreeBSD build 1036 10372005-06-26 - v0.4.3 1038 * fixed PMKSA caching to copy User-Name and Class attributes so that 1039 RADIUS accounting gets correct information 1040 * start RADIUS accounting only after successful completion of WPA 1041 4-Way Handshake if WPA-PSK is used 1042 * fixed PMKSA caching for the case where STA (re)associates without 1043 first disassociating 1044 10452005-06-12 - v0.4.2 1046 * EAP-PAX is now registered as EAP type 46 1047 * fixed EAP-PAX MAC calculation 1048 * fixed EAP-PAX CK and ICK key derivation 1049 * renamed eap_authenticator configuration variable to eap_server to 1050 better match with RFC 3748 (EAP) terminology 1051 * driver_test: added support for testing hostapd with wpa_supplicant 1052 by using test driver interface without any kernel drivers or network 1053 cards 1054 10552005-05-22 - v0.4.1 1056 * fixed RADIUS server initialization when only auth or acct server 1057 is configured and the other one is left empty 1058 * driver_madwifi: added support for RADIUS accounting 1059 * driver_madwifi: added preliminary support for compiling against 'BSD' 1060 branch of madwifi CVS tree 1061 * driver_madwifi: fixed pairwise key removal to allow WPA reauth 1062 without disassociation 1063 * added support for reading additional certificates from PKCS#12 files 1064 and adding them to the certificate chain 1065 * fixed RADIUS Class attribute processing to only use Access-Accept 1066 packets to update Class; previously, other RADIUS authentication 1067 packets could have cleared Class attribute 1068 * added support for more than one Class attribute in RADIUS packets 1069 * added support for verifying certificate revocation list (CRL) when 1070 using integrated EAP authenticator for EAP-TLS; new hostapd.conf 1071 options 'check_crl'; CRL must be included in the ca_cert file for now 1072 10732005-04-25 - v0.4.0 (beginning of 0.4.x development releases) 1074 * added support for including network information into 1075 EAP-Request/Identity message (ASCII-0 (nul) in eap_message) 1076 (e.g., to implement draft-adrange-eap-network-discovery-07.txt) 1077 * fixed a bug which caused some RSN pre-authentication cases to use 1078 freed memory and potentially crash hostapd 1079 * fixed private key loading for cases where passphrase is not set 1080 * added support for sending TLS alerts and aborting authentication 1081 when receiving a TLS alert 1082 * fixed WPA2 to add PMKSA cache entry when using integrated EAP 1083 authenticator 1084 * fixed PMKSA caching (EAP authentication was not skipped correctly 1085 with the new state machine changes from IEEE 802.1X draft) 1086 * added support for RADIUS over IPv6; own_ip_addr, auth_server_addr, 1087 and acct_server_addr can now be IPv6 addresses (CONFIG_IPV6=y needs 1088 to be added to .config to include IPv6 support); for RADIUS server, 1089 radius_server_ipv6=1 needs to be set in hostapd.conf and addresses 1090 in RADIUS clients file can then use IPv6 format 1091 * added experimental support for EAP-PAX 1092 * replaced hostapd control interface library (hostapd_ctrl.[ch]) with 1093 the same implementation that wpa_supplicant is using (wpa_ctrl.[ch]) 1094 10952005-02-12 - v0.3.7 (beginning of 0.3.x stable releases) 1096 10972005-01-23 - v0.3.5 1098 * added support for configuring a forced PEAP version based on the 1099 Phase 1 identity 1100 * fixed PEAPv1 to use tunneled EAP-Success/Failure instead of EAP-TLV 1101 to terminate authentication 1102 * fixed EAP identifier duplicate processing with the new IEEE 802.1X 1103 draft 1104 * clear accounting data in the driver when starting a new accounting 1105 session 1106 * driver_madwifi: filter wireless events based on ifindex to allow more 1107 than one network interface to be used 1108 * fixed WPA message 2/4 processing not to cancel timeout for TimeoutEvt 1109 setting if the packet does not pass MIC verification (e.g., due to 1110 incorrect PSK); previously, message 1/4 was not tried again if an 1111 invalid message 2/4 was received 1112 * fixed reconfiguration of RADIUS client retransmission timer when 1113 adding a new message to the pending list; previously, timer was not 1114 updated at this point and if there was a pending message with long 1115 time for the next retry, the new message needed to wait that long for 1116 its first retry, too 1117 11182005-01-09 - v0.3.4 1119 * added support for configuring multiple allowed EAP types for Phase 2 1120 authentication (EAP-PEAP, EAP-TTLS) 1121 * fixed EAPOL-Start processing to trigger WPA reauthentication 1122 (previously, only EAPOL authentication was done) 1123 11242005-01-02 - v0.3.3 1125 * added support for EAP-PEAP in the integrated EAP authenticator 1126 * added support for EAP-GTC in the integrated EAP authenticator 1127 * added support for configuring list of EAP methods for Phase 1 so that 1128 the integrated EAP authenticator can, e.g., use the wildcard entry 1129 for EAP-TLS and EAP-PEAP 1130 * added support for EAP-TTLS in the integrated EAP authenticator 1131 * added support for EAP-SIM in the integrated EAP authenticator 1132 * added support for using hostapd as a RADIUS authentication server 1133 with the integrated EAP authenticator taking care of EAP 1134 authentication (new hostapd.conf options: radius_server_clients and 1135 radius_server_auth_port); this is not included in default build; use 1136 CONFIG_RADIUS_SERVER=y in .config to include 1137 11382004-12-19 - v0.3.2 1139 * removed 'daemonize' configuration file option since it has not really 1140 been used at all for more than year 1141 * driver_madwifi: fixed group key setup and added get_ssid method 1142 * added support for EAP-MSCHAPv2 in the integrated EAP authenticator 1143 11442004-12-12 - v0.3.1 1145 * added support for integrated EAP-TLS authentication (new hostapd.conf 1146 variables: ca_cert, server_cert, private_key, private_key_passwd); 1147 this enabled dynamic keying (WPA2/WPA/IEEE 802.1X/WEP) without 1148 external RADIUS server 1149 * added support for reading PKCS#12 (PFX) files (as a replacement for 1150 PEM/DER) to get certificate and private key (CONFIG_PKCS12) 1151 11522004-12-05 - v0.3.0 (beginning of 0.3.x development releases) 1153 * added support for Acct-{Input,Output}-Gigawords 1154 * added support for Event-Timestamp (in RADIUS Accounting-Requests) 1155 * added support for RADIUS Authentication Client MIB (RFC2618) 1156 * added support for RADIUS Accounting Client MIB (RFC2620) 1157 * made EAP re-authentication period configurable (eap_reauth_period) 1158 * fixed EAPOL reauthentication to trigger WPA/WPA2 reauthentication 1159 * fixed EAPOL state machine to stop if STA is removed during 1160 eapol_sm_step(); this fixes at least one segfault triggering bug with 1161 IEEE 802.11i pre-authentication 1162 * added support for multiple WPA pre-shared keys (e.g., one for each 1163 client MAC address or keys shared by a group of clients); 1164 new hostapd.conf field wpa_psk_file for setting path to a text file 1165 containing PSKs, see hostapd.wpa_psk for an example 1166 * added support for multiple driver interfaces to allow hostapd to be 1167 used with other drivers 1168 * added wired authenticator driver interface (driver=wired in 1169 hostapd.conf, see wired.conf for example configuration) 1170 * added madwifi driver interface (driver=madwifi in hostapd.conf, see 1171 madwifi.conf for example configuration; Note: include files from 1172 madwifi project is needed for building and a configuration file, 1173 .config, needs to be created in hostapd directory with 1174 CONFIG_DRIVER_MADWIFI=y to include this driver interface in hostapd 1175 build) 1176 * fixed an alignment issue that could cause SHA-1 to fail on some 1177 platforms (e.g., Intel ixp425 with a compiler that does not 32-bit 1178 align variables) 1179 * fixed RADIUS reconnection after an error in sending interim 1180 accounting packets 1181 * added hostapd control interface for external programs and an example 1182 CLI, hostapd_cli (like wpa_cli for wpa_supplicant) 1183 * started adding dot11, dot1x, radius MIBs ('hostapd_cli mib', 1184 'hostapd_cli sta <addr>') 1185 * finished update from IEEE 802.1X-2001 to IEEE 802.1X-REV (now d11) 1186 * added support for strict GTK rekeying (wpa_strict_rekey in 1187 hostapd.conf) 1188 * updated IAPP to use UDP port 3517 and multicast address 224.0.1.178 1189 (instead of broadcast) for IAPP ADD-notify (moved from draft 3 to 1190 IEEE 802.11F-2003) 1191 * added Prism54 driver interface (driver=prism54 in hostapd.conf; 1192 note: .config needs to be created in hostapd directory with 1193 CONFIG_DRIVER_PRISM54=y to include this driver interface in hostapd 1194 build) 1195 * dual-licensed hostapd (GPLv2 and BSD licenses) 1196 * fixed RADIUS accounting to generate a new session id for cases where 1197 a station reassociates without first being complete deauthenticated 1198 * fixed STA disassociation handler to mark next timeout state to 1199 deauthenticate the station, i.e., skip long wait for inactivity poll 1200 and extra disassociation, if the STA disassociates without 1201 deauthenticating 1202 * added integrated EAP authenticator that can be used instead of 1203 external RADIUS authentication server; currently, only EAP-MD5 is 1204 supported, so this cannot yet be used for key distribution; the EAP 1205 method interface is generic, though, so adding new EAP methods should 1206 be straightforward; new hostapd.conf variables: 'eap_authenticator' 1207 and 'eap_user_file'; this obsoletes "minimal authentication server" 1208 ('minimal_eap' in hostapd.conf) which is now removed 1209 * added support for FreeBSD and driver interface for the BSD net80211 1210 layer (driver=bsd in hostapd.conf and CONFIG_DRIVER_BSD=y in 1211 .config); please note that some of the required kernel mods have not 1212 yet been committed 1213 12142004-07-17 - v0.2.4 (beginning of 0.2.x stable releases) 1215 * fixed some accounting cases where Accounting-Start was sent when 1216 IEEE 802.1X port was being deauthorized 1217 12182004-06-20 - v0.2.3 1219 * modified RADIUS client to re-connect the socket in case of certain 1220 error codes that are generated when a network interface state is 1221 changes (e.g., when IP address changes or the interface is set UP) 1222 * fixed couple of cases where EAPOL state for a station was freed 1223 twice causing a segfault for hostapd 1224 * fixed couple of bugs in processing WPA deauthentication (freed data 1225 was used) 1226 12272004-05-31 - v0.2.2 1228 * fixed WPA/WPA2 group rekeying to use key index correctly (GN/GM) 1229 * fixed group rekeying to send zero TSC in EAPOL-Key messages to fix 1230 cases where STAs dropped multicast frames as replay attacks 1231 * added support for copying RADIUS Attribute 'Class' from 1232 authentication messages into accounting messages 1233 * send canned EAP failure if RADIUS server sends Access-Reject without 1234 EAP message (previously, Supplicant was not notified in this case) 1235 * fixed mixed WPA-PSK and WPA-EAP mode to work with WPA-PSK (i.e., do 1236 not start EAPOL state machines if the STA selected to use WPA-PSK) 1237 12382004-05-06 - v0.2.1 1239 * added WPA and IEEE 802.11i/RSN (WPA2) Authenticator functionality 1240 - based on IEEE 802.11i/D10.0 but modified to interoperate with WPA 1241 (i.e., IEEE 802.11i/D3.0) 1242 - supports WPA-only, RSN-only, and mixed WPA/RSN mode 1243 - both WPA-PSK and WPA-RADIUS/EAP are supported 1244 - PMKSA caching and pre-authentication 1245 - new hostapd.conf variables: wpa, wpa_psk, wpa_passphrase, 1246 wpa_key_mgmt, wpa_pairwise, wpa_group_rekey, wpa_gmk_rekey, 1247 rsn_preauth, rsn_preauth_interfaces 1248 * fixed interim accounting to remove any pending accounting messages 1249 to the STA before sending a new one 1250 12512004-02-15 - v0.2.0 1252 * added support for Acct-Interim-Interval: 1253 - draft-ietf-radius-acct-interim-01.txt 1254 - use Acct-Interim-Interval attribute from Access-Accept if local 1255 'radius_acct_interim_interval' is not set 1256 - allow different update intervals for each STA 1257 * fixed event loop to call signal handlers only after returning from 1258 the real signal handler 1259 * reset sta->timeout_next after successful association to make sure 1260 that the previously registered inactivity timer will not remove the 1261 STA immediately (e.g., if STA deauthenticates and re-associates 1262 before the timer is triggered). 1263 * added new hostapd.conf variable, nas_identifier, that can be used to 1264 add an optional RADIUS Attribute, NAS-Identifier, into authentication 1265 and accounting messages 1266 * added support for Accounting-On and Accounting-Off messages 1267 * fixed accounting session handling to send Accounting-Start only once 1268 per session and not to send Accounting-Stop if the session was not 1269 initialized properly 1270 * fixed Accounting-Stop statistics in cases where the message was 1271 previously sent after the kernel entry for the STA (and/or IEEE 1272 802.1X data) was removed 1273 1274 1275Note: 1276 1277Older changes up to and including v0.1.0 are included in the ChangeLog 1278of the Host AP driver. 1279