1/* 2 * Copyright (C) 2019 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17package android.hardware.gnss@2.1; 18 19import @1.0::IGnssMeasurement; 20import @1.1::IGnssMeasurement; 21import @2.0::IGnssMeasurement; 22import IGnssMeasurementCallback; 23 24/** 25 * Extended interface for GNSS Measurements support. 26 */ 27interface IGnssMeasurement extends @2.0::IGnssMeasurement { 28 /** 29 * Initializes the interface and registers the callback routines with the HAL. After a 30 * successful call to 'setCallback_2_1' the HAL must begin to provide updates at an average 31 * output rate of 1Hz (occasional intra-measurement time offsets in the range from 0-2000msec 32 * can be tolerated.) 33 * 34 * @param callback Handle to GnssMeasurement callback interface. 35 * @param enableFullTracking If true, GNSS chipset must switch off duty cycling. In such mode 36 * no clock discontinuities are expected and, when supported, carrier phase should be 37 * continuous in good signal conditions. All non-blacklisted, healthy constellations, 38 * satellites and frequency bands that the chipset supports must be reported in this mode. 39 * The GNSS chipset is allowed to consume more power in this mode. If false, API must behave 40 * as in HAL V1_0, optimizing power via duty cycling, constellations and frequency limits, 41 * etc. 42 * 43 * @return initRet Returns SUCCESS if successful. Returns ERROR_ALREADY_INIT if a callback has 44 * already been registered without a corresponding call to 'close'. Returns ERROR_GENERIC 45 * for any other error. The HAL must not generate any other updates upon returning this 46 * error code. 47 */ 48 setCallback_2_1(IGnssMeasurementCallback callback, bool enableFullTracking) 49 generates (GnssMeasurementStatus initRet); 50}; 51