1# Copyright 2019 The Android Open Source Project
2#
3# Licensed under the Apache License, Version 2.0 (the "License");
4# you may not use this file except in compliance with the License.
5# You may obtain a copy of the License at
6#
7#      http://www.apache.org/licenses/LICENSE-2.0
8#
9# Unless required by applicable law or agreed to in writing, software
10# distributed under the License is distributed on an "AS IS" BASIS,
11# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12# See the License for the specific language governing permissions and
13# limitations under the License.
14#
15
16# If you don't need to do a full clean build but would like to touch
17# a file or delete some intermediate files, add a clean step to the end
18# of the list.  These steps will only be run once, if they haven't been
19# run before.
20#
21# E.g.:
22#     $(call add-clean-step, touch -c external/sqlite/sqlite3.h)
23#     $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates)
24#
25# Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with
26# files that are missing or have been moved.
27#
28# Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory.
29# Use $(OUT_DIR) to refer to the "out" directory.
30#
31# If you need to re-do something that's already mentioned, just copy
32# the command and add it to the bottom of the list.  E.g., if a change
33# that you made last week required touching a file and a change you
34# made today requires touching the same file, just copy the old
35# touch step and add it to the end of the list.
36#
37# ************************************************
38# NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
39# ************************************************
40
41# For example:
42#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates)
43#$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates)
44#$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f)
45#$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*)
46
47# Remove default android.hardware.health@2.0-service
48$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.health@2.0-service)
49$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.health@2.0-service.rc)
50$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.health@2.0-service.sunfish)
51$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.health@2.0-service.sunfish.rc)
52
53# Remove health HAL 2.1
54$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.health@2.1-service)
55$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.health@2.1-service.rc)
56
57# Remove healthd
58$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/healthd)
59$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/init/healthd.rc)
60
61# Move libnfc-nci.conf to /vendor
62$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/libnfc-nci.conf)
63
64# Remove /firmware which used to be a symlink to /vendor/firmware_mnt
65$(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/firmware)
66
67# Remove thermalHAL 1.0
68$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.thermal@1.0-service.sunfish.rc)
69$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.thermal@1.0-service.sunfish)
70
71# Remove default android.hardware.composer@2.2
72$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.composer@2.2-service)
73$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.composer@2.2-service.rc)
74$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.composer@2.2-impl.so)
75
76# Remove default android.hardware.graphics.composer@2.3-service
77$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.composer@2.3-service)
78$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.composer@2.3-service.rc)
79
80# Remove android.hardware.graphics.composer@2.3-service-sm7150
81$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.composer@2.3-service-sm7150)
82$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.composer@2.3-service-sm7150.rc)
83
84# Remove super_empty.img
85$(call add-clean-step, rm -rf $(PRODUCT_OUT)/super_empty.img)
86
87# Remove Vibrator HAL 1.2
88$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vibrator@1.2-service.sunfish.rc)
89$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vibrator@1.2-service.sunfish)
90
91# Remove Misnamed Vibrator VINTF Fragment
92$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/manifest.xml)
93
94# Rename power HAL
95$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.3-service.sunfish-libperfmgr.rc)
96
97# Remove VR permission
98$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/permissions/android.hardware.vr.headtracking.xml)
99$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/permissions/android.hardware.vr.high_performance.xml)
100
101# Remove obsolete android.hardware.boot@1.0-impl-wrapper.recovery.so
102$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/system/lib64/hw/android.hardware.boot@1.0-impl-wrapper.recovery.so)
103
104# Move android.hidl.base@1.0.so to system_ext
105$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/android.hidl.base@1.0.so)
106$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/android.hidl.base@1.0.so)
107
108# Remove Face permission
109$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/permissions/android.hardware.biometrics.face.xml)
110
111# Removing GSI keys from the ramdisk.
112# Those keys will be embedded into VTS instead, to verify the GSI image in used.
113$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/first_stage_ramdisk/avb/q-gsi.avbpubkey)
114$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/first_stage_ramdisk/avb/r-gsi.avbpubkey)
115$(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/first_stage_ramdisk/avb/s-gsi.avbpubkey)
116
117# Use stable aidl power HAL
118$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.3-service.pixel-libperfmgr.rc)
119
120# Remove generic atrace HAL
121$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.atrace@1.0-service.rc)
122$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.atrace@1.0-service.xml)
123
124# Update to USB HAL 1.3
125$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.usb@1.2-service.sunfish)
126$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.usb@1.2-service.sunfish.rc)
127$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.usb@1.2-service.sunfish.xml)
128$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.usb@1.3-service.sunfish)
129$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.usb@1.3-service.sunfish.rc)
130$(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.usb@1.3-service.sunfish.xml)
131