1 /*
2 Copyright (C) Intel Corp. 2006. All Rights Reserved.
3 Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
4 develop this 3D driver.
5
6 Permission is hereby granted, free of charge, to any person obtaining
7 a copy of this software and associated documentation files (the
8 "Software"), to deal in the Software without restriction, including
9 without limitation the rights to use, copy, modify, merge, publish,
10 distribute, sublicense, and/or sell copies of the Software, and to
11 permit persons to whom the Software is furnished to do so, subject to
12 the following conditions:
13
14 The above copyright notice and this permission notice (including the
15 next paragraph) shall be included in all copies or substantial
16 portions of the Software.
17
18 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
19 EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
20 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
21 IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
22 LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
23 OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
24 WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
25
26 **********************************************************************/
27 /*
28 * Authors:
29 * Keith Whitwell <keith@tungstengraphics.com>
30 */
31
32
33
34 #include "intel_batchbuffer.h"
35 #include "intel_fbo.h"
36 #include "intel_mipmap_tree.h"
37 #include "intel_regions.h"
38
39 #include "brw_context.h"
40 #include "brw_state.h"
41 #include "brw_defines.h"
42
43 #include "main/fbobject.h"
44
45 /* Constant single cliprect for framebuffer object or DRI2 drawing */
upload_drawing_rect(struct brw_context * brw)46 static void upload_drawing_rect(struct brw_context *brw)
47 {
48 struct intel_context *intel = &brw->intel;
49 struct gl_context *ctx = &intel->ctx;
50
51 BEGIN_BATCH(4);
52 OUT_BATCH(_3DSTATE_DRAWING_RECTANGLE << 16 | (4 - 2));
53 OUT_BATCH(0); /* xmin, ymin */
54 OUT_BATCH(((ctx->DrawBuffer->Width - 1) & 0xffff) |
55 ((ctx->DrawBuffer->Height - 1) << 16));
56 OUT_BATCH(0);
57 ADVANCE_BATCH();
58 }
59
60 const struct brw_tracked_state brw_drawing_rect = {
61 .dirty = {
62 .mesa = _NEW_BUFFERS,
63 .brw = BRW_NEW_CONTEXT,
64 .cache = 0
65 },
66 .emit = upload_drawing_rect
67 };
68
69 /**
70 * Upload the binding table pointers, which point each stage's array of surface
71 * state pointers.
72 *
73 * The binding table pointers are relative to the surface state base address,
74 * which points at the batchbuffer containing the streamed batch state.
75 */
upload_binding_table_pointers(struct brw_context * brw)76 static void upload_binding_table_pointers(struct brw_context *brw)
77 {
78 struct intel_context *intel = &brw->intel;
79
80 BEGIN_BATCH(6);
81 OUT_BATCH(_3DSTATE_BINDING_TABLE_POINTERS << 16 | (6 - 2));
82 OUT_BATCH(brw->vs.bind_bo_offset);
83 OUT_BATCH(0); /* gs */
84 OUT_BATCH(0); /* clip */
85 OUT_BATCH(0); /* sf */
86 OUT_BATCH(brw->wm.bind_bo_offset);
87 ADVANCE_BATCH();
88 }
89
90 const struct brw_tracked_state brw_binding_table_pointers = {
91 .dirty = {
92 .mesa = 0,
93 .brw = (BRW_NEW_BATCH |
94 BRW_NEW_STATE_BASE_ADDRESS |
95 BRW_NEW_VS_BINDING_TABLE |
96 BRW_NEW_GS_BINDING_TABLE |
97 BRW_NEW_PS_BINDING_TABLE),
98 .cache = 0,
99 },
100 .emit = upload_binding_table_pointers,
101 };
102
103 /**
104 * Upload the binding table pointers, which point each stage's array of surface
105 * state pointers.
106 *
107 * The binding table pointers are relative to the surface state base address,
108 * which points at the batchbuffer containing the streamed batch state.
109 */
upload_gen6_binding_table_pointers(struct brw_context * brw)110 static void upload_gen6_binding_table_pointers(struct brw_context *brw)
111 {
112 struct intel_context *intel = &brw->intel;
113
114 BEGIN_BATCH(4);
115 OUT_BATCH(_3DSTATE_BINDING_TABLE_POINTERS << 16 |
116 GEN6_BINDING_TABLE_MODIFY_VS |
117 GEN6_BINDING_TABLE_MODIFY_GS |
118 GEN6_BINDING_TABLE_MODIFY_PS |
119 (4 - 2));
120 OUT_BATCH(brw->vs.bind_bo_offset); /* vs */
121 OUT_BATCH(brw->gs.bind_bo_offset); /* gs */
122 OUT_BATCH(brw->wm.bind_bo_offset); /* wm/ps */
123 ADVANCE_BATCH();
124 }
125
126 const struct brw_tracked_state gen6_binding_table_pointers = {
127 .dirty = {
128 .mesa = 0,
129 .brw = (BRW_NEW_BATCH |
130 BRW_NEW_STATE_BASE_ADDRESS |
131 BRW_NEW_VS_BINDING_TABLE |
132 BRW_NEW_GS_BINDING_TABLE |
133 BRW_NEW_PS_BINDING_TABLE),
134 .cache = 0,
135 },
136 .emit = upload_gen6_binding_table_pointers,
137 };
138
139 /**
140 * Upload pointers to the per-stage state.
141 *
142 * The state pointers in this packet are all relative to the general state
143 * base address set by CMD_STATE_BASE_ADDRESS, which is 0.
144 */
upload_pipelined_state_pointers(struct brw_context * brw)145 static void upload_pipelined_state_pointers(struct brw_context *brw )
146 {
147 struct intel_context *intel = &brw->intel;
148
149 if (intel->gen == 5) {
150 /* Need to flush before changing clip max threads for errata. */
151 BEGIN_BATCH(1);
152 OUT_BATCH(MI_FLUSH);
153 ADVANCE_BATCH();
154 }
155
156 BEGIN_BATCH(7);
157 OUT_BATCH(_3DSTATE_PIPELINED_POINTERS << 16 | (7 - 2));
158 OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
159 brw->vs.state_offset);
160 if (brw->gs.prog_active)
161 OUT_RELOC(brw->intel.batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
162 brw->gs.state_offset | 1);
163 else
164 OUT_BATCH(0);
165 OUT_RELOC(brw->intel.batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
166 brw->clip.state_offset | 1);
167 OUT_RELOC(brw->intel.batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
168 brw->sf.state_offset);
169 OUT_RELOC(brw->intel.batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
170 brw->wm.state_offset);
171 OUT_RELOC(brw->intel.batch.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
172 brw->cc.state_offset);
173 ADVANCE_BATCH();
174
175 brw->state.dirty.brw |= BRW_NEW_PSP;
176 }
177
upload_psp_urb_cbs(struct brw_context * brw)178 static void upload_psp_urb_cbs(struct brw_context *brw )
179 {
180 upload_pipelined_state_pointers(brw);
181 brw_upload_urb_fence(brw);
182 brw_upload_cs_urb_state(brw);
183 }
184
185 const struct brw_tracked_state brw_psp_urb_cbs = {
186 .dirty = {
187 .mesa = 0,
188 .brw = (BRW_NEW_URB_FENCE |
189 BRW_NEW_BATCH |
190 BRW_NEW_STATE_BASE_ADDRESS),
191 .cache = (CACHE_NEW_VS_UNIT |
192 CACHE_NEW_GS_UNIT |
193 CACHE_NEW_GS_PROG |
194 CACHE_NEW_CLIP_UNIT |
195 CACHE_NEW_SF_UNIT |
196 CACHE_NEW_WM_UNIT |
197 CACHE_NEW_CC_UNIT)
198 },
199 .emit = upload_psp_urb_cbs,
200 };
201
202 uint32_t
brw_depthbuffer_format(struct brw_context * brw)203 brw_depthbuffer_format(struct brw_context *brw)
204 {
205 struct intel_context *intel = &brw->intel;
206 struct gl_context *ctx = &intel->ctx;
207 struct gl_framebuffer *fb = ctx->DrawBuffer;
208 struct intel_renderbuffer *drb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
209 struct intel_renderbuffer *srb;
210
211 if (!drb &&
212 (srb = intel_get_renderbuffer(fb, BUFFER_STENCIL)) &&
213 !srb->mt->stencil_mt &&
214 (intel_rb_format(srb) == MESA_FORMAT_S8_Z24 ||
215 intel_rb_format(srb) == MESA_FORMAT_Z32_FLOAT_X24S8)) {
216 drb = srb;
217 }
218
219 if (!drb)
220 return BRW_DEPTHFORMAT_D32_FLOAT;
221
222 switch (drb->mt->format) {
223 case MESA_FORMAT_Z16:
224 return BRW_DEPTHFORMAT_D16_UNORM;
225 case MESA_FORMAT_Z32_FLOAT:
226 return BRW_DEPTHFORMAT_D32_FLOAT;
227 case MESA_FORMAT_X8_Z24:
228 if (intel->gen >= 6) {
229 return BRW_DEPTHFORMAT_D24_UNORM_X8_UINT;
230 } else {
231 /* Use D24_UNORM_S8, not D24_UNORM_X8.
232 *
233 * D24_UNORM_X8 was not introduced until Gen5. (See the Ironlake PRM,
234 * Volume 2, Part 1, Section 8.4.6 "Depth/Stencil Buffer State", Bits
235 * 3DSTATE_DEPTH_BUFFER.Surface_Format).
236 *
237 * However, on Gen5, D24_UNORM_X8 may be used only if separate
238 * stencil is enabled, and we never enable it. From the Ironlake PRM,
239 * same section as above, Bit 3DSTATE_DEPTH_BUFFER.Separate_Stencil_Buffer_Enable:
240 * If this field is disabled, the Surface Format of the depth
241 * buffer cannot be D24_UNORM_X8_UINT.
242 */
243 return BRW_DEPTHFORMAT_D24_UNORM_S8_UINT;
244 }
245 case MESA_FORMAT_S8_Z24:
246 return BRW_DEPTHFORMAT_D24_UNORM_S8_UINT;
247 case MESA_FORMAT_Z32_FLOAT_X24S8:
248 return BRW_DEPTHFORMAT_D32_FLOAT_S8X24_UINT;
249 default:
250 _mesa_problem(ctx, "Unexpected depth format %s\n",
251 _mesa_get_format_name(intel_rb_format(drb)));
252 return BRW_DEPTHFORMAT_D16_UNORM;
253 }
254 }
255
emit_depthbuffer(struct brw_context * brw)256 static void emit_depthbuffer(struct brw_context *brw)
257 {
258 struct intel_context *intel = &brw->intel;
259 struct gl_context *ctx = &intel->ctx;
260 struct gl_framebuffer *fb = ctx->DrawBuffer;
261 /* _NEW_BUFFERS */
262 struct intel_renderbuffer *depth_irb = intel_get_renderbuffer(fb, BUFFER_DEPTH);
263 struct intel_renderbuffer *stencil_irb = intel_get_renderbuffer(fb, BUFFER_STENCIL);
264 struct intel_mipmap_tree *stencil_mt = NULL;
265 struct intel_region *hiz_region = NULL;
266 unsigned int len;
267 bool separate_stencil = false;
268
269 /* Amount by which drawing should be offset in order to draw to the
270 * appropriate miplevel/zoffset/cubeface. We will extract these values
271 * from depth_irb or stencil_irb once we determine which is present.
272 */
273 uint32_t draw_x = 0, draw_y = 0;
274
275 /* Masks used to determine how much of the draw_x and draw_y offsets should
276 * be performed using the fine adjustment of "depth coordinate offset X/Y"
277 * (dw5 of 3DSTATE_DEPTH_BUFFER). Any remaining coarse adjustment will be
278 * performed by changing the base addresses of the buffers.
279 *
280 * Since the HiZ, depth, and stencil buffers all use the same "depth
281 * coordinate offset X/Y" values, we need to make sure that the coarse
282 * adjustment will be possible to apply to all three buffers. Since coarse
283 * adjustment can only be applied in multiples of the tile size, we will OR
284 * together the tile masks of all the buffers to determine which offsets to
285 * perform as fine adjustments.
286 */
287 uint32_t tile_mask_x = 0, tile_mask_y = 0;
288
289 if (depth_irb) {
290 intel_region_get_tile_masks(depth_irb->mt->region,
291 &tile_mask_x, &tile_mask_y, false);
292 }
293
294 if (depth_irb &&
295 depth_irb->mt &&
296 depth_irb->mt->hiz_mt) {
297 hiz_region = depth_irb->mt->hiz_mt->region;
298
299 uint32_t hiz_tile_mask_x, hiz_tile_mask_y;
300 intel_region_get_tile_masks(hiz_region,
301 &hiz_tile_mask_x, &hiz_tile_mask_y, false);
302
303 /* Each HiZ row represents 2 rows of pixels */
304 hiz_tile_mask_y = hiz_tile_mask_y << 1 | 1;
305
306 tile_mask_x |= hiz_tile_mask_x;
307 tile_mask_y |= hiz_tile_mask_y;
308 }
309
310 /* 3DSTATE_DEPTH_BUFFER, 3DSTATE_STENCIL_BUFFER are both
311 * non-pipelined state that will need the PIPE_CONTROL workaround.
312 */
313 if (intel->gen == 6) {
314 intel_emit_post_sync_nonzero_flush(intel);
315 intel_emit_depth_stall_flushes(intel);
316 }
317
318 /* Find the real separate stencil mt if present. */
319 if (stencil_irb) {
320 stencil_mt = stencil_irb->mt;
321 if (stencil_mt->stencil_mt)
322 stencil_mt = stencil_mt->stencil_mt;
323
324 if (stencil_mt->format == MESA_FORMAT_S8) {
325 separate_stencil = true;
326
327 /* Separate stencil buffer uses 64x64 tiles. */
328 tile_mask_x |= 63;
329 tile_mask_y |= 63;
330 } else {
331 uint32_t stencil_tile_mask_x, stencil_tile_mask_y;
332 intel_region_get_tile_masks(stencil_mt->region,
333 &stencil_tile_mask_x,
334 &stencil_tile_mask_y, false);
335
336 tile_mask_x |= stencil_tile_mask_x;
337 tile_mask_y |= stencil_tile_mask_y;
338 }
339 }
340
341 /* If there's a packed depth/stencil bound to stencil only, we need to
342 * emit the packed depth/stencil buffer packet.
343 */
344 if (!depth_irb && stencil_irb && !separate_stencil)
345 depth_irb = stencil_irb;
346
347 if (intel->gen >= 6)
348 len = 7;
349 else if (intel->is_g4x || intel->gen == 5)
350 len = 6;
351 else
352 len = 5;
353
354 if (!depth_irb && !separate_stencil) {
355 BEGIN_BATCH(len);
356 OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (len - 2));
357 OUT_BATCH((BRW_DEPTHFORMAT_D32_FLOAT << 18) |
358 (BRW_SURFACE_NULL << 29));
359 OUT_BATCH(0);
360 OUT_BATCH(0);
361 OUT_BATCH(0);
362
363 if (intel->is_g4x || intel->gen >= 5)
364 OUT_BATCH(0);
365
366 if (intel->gen >= 6)
367 OUT_BATCH(0);
368
369 ADVANCE_BATCH();
370
371 } else if (!depth_irb && separate_stencil) {
372 uint32_t tile_x, tile_y;
373
374 /*
375 * There exists a separate stencil buffer but no depth buffer.
376 *
377 * The stencil buffer inherits most of its fields from
378 * 3DSTATE_DEPTH_BUFFER: namely the tile walk, surface type, width, and
379 * height.
380 *
381 * Enable the hiz bit because it and the separate stencil bit must have
382 * the same value. From Section 2.11.5.6.1.1 3DSTATE_DEPTH_BUFFER, Bit
383 * 1.21 "Separate Stencil Enable":
384 * [DevIL]: If this field is enabled, Hierarchical Depth Buffer
385 * Enable must also be enabled.
386 *
387 * [DevGT]: This field must be set to the same value (enabled or
388 * disabled) as Hierarchical Depth Buffer Enable
389 *
390 * The tiled bit must be set. From the Sandybridge PRM, Volume 2, Part 1,
391 * Section 7.5.5.1.1 3DSTATE_DEPTH_BUFFER, Bit 1.27 Tiled Surface:
392 * [DevGT+]: This field must be set to TRUE.
393 */
394 assert(intel->has_separate_stencil);
395
396 draw_x = stencil_irb->draw_x;
397 draw_y = stencil_irb->draw_y;
398 tile_x = draw_x & tile_mask_x;
399 tile_y = draw_y & tile_mask_y;
400
401 /* According to the Sandy Bridge PRM, volume 2 part 1, pp326-327
402 * (3DSTATE_DEPTH_BUFFER dw5), in the documentation for "Depth
403 * Coordinate Offset X/Y":
404 *
405 * "The 3 LSBs of both offsets must be zero to ensure correct
406 * alignment"
407 *
408 * We have no guarantee that tile_x and tile_y are correctly aligned,
409 * since they are determined by the mipmap layout, which is only aligned
410 * to multiples of 4.
411 *
412 * So, to avoid hanging the GPU, just smash the low order 3 bits of
413 * tile_x and tile_y to 0. This is a temporary workaround until we come
414 * up with a better solution.
415 */
416 if (intel->gen >= 6) {
417 tile_x &= ~7;
418 tile_y &= ~7;
419 }
420
421 BEGIN_BATCH(len);
422 OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (len - 2));
423 OUT_BATCH((BRW_DEPTHFORMAT_D32_FLOAT << 18) |
424 (1 << 21) | /* separate stencil enable */
425 (1 << 22) | /* hiz enable */
426 (BRW_TILEWALK_YMAJOR << 26) |
427 (1 << 27) | /* tiled surface */
428 (BRW_SURFACE_2D << 29));
429 OUT_BATCH(0);
430 OUT_BATCH(((stencil_irb->Base.Base.Width + tile_x - 1) << 6) |
431 (stencil_irb->Base.Base.Height + tile_y - 1) << 19);
432 OUT_BATCH(0);
433
434 if (intel->is_g4x || intel->gen >= 5)
435 OUT_BATCH(tile_x | (tile_y << 16));
436 else
437 assert(tile_x == 0 && tile_y == 0);
438
439 if (intel->gen >= 6)
440 OUT_BATCH(0);
441
442 ADVANCE_BATCH();
443
444 } else {
445 struct intel_region *region = depth_irb->mt->region;
446 uint32_t tile_x, tile_y, offset;
447
448 /* If using separate stencil, hiz must be enabled. */
449 assert(!separate_stencil || hiz_region);
450
451 assert(intel->gen < 6 || region->tiling == I915_TILING_Y);
452 assert(!hiz_region || region->tiling == I915_TILING_Y);
453
454 draw_x = depth_irb->draw_x;
455 draw_y = depth_irb->draw_y;
456 tile_x = draw_x & tile_mask_x;
457 tile_y = draw_y & tile_mask_y;
458
459 /* According to the Sandy Bridge PRM, volume 2 part 1, pp326-327
460 * (3DSTATE_DEPTH_BUFFER dw5), in the documentation for "Depth
461 * Coordinate Offset X/Y":
462 *
463 * "The 3 LSBs of both offsets must be zero to ensure correct
464 * alignment"
465 *
466 * We have no guarantee that tile_x and tile_y are correctly aligned,
467 * since they are determined by the mipmap layout, which is only aligned
468 * to multiples of 4.
469 *
470 * So, to avoid hanging the GPU, just smash the low order 3 bits of
471 * tile_x and tile_y to 0. This is a temporary workaround until we come
472 * up with a better solution.
473 */
474 tile_x &= ~7;
475 tile_y &= ~7;
476
477 offset = intel_region_get_aligned_offset(region,
478 draw_x & ~tile_mask_x,
479 draw_y & ~tile_mask_y, false);
480
481 BEGIN_BATCH(len);
482 OUT_BATCH(_3DSTATE_DEPTH_BUFFER << 16 | (len - 2));
483 OUT_BATCH(((region->pitch * region->cpp) - 1) |
484 (brw_depthbuffer_format(brw) << 18) |
485 ((hiz_region ? 1 : 0) << 21) | /* separate stencil enable */
486 ((hiz_region ? 1 : 0) << 22) | /* hiz enable */
487 (BRW_TILEWALK_YMAJOR << 26) |
488 ((region->tiling != I915_TILING_NONE) << 27) |
489 (BRW_SURFACE_2D << 29));
490 OUT_RELOC(region->bo,
491 I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER,
492 offset);
493 OUT_BATCH((BRW_SURFACE_MIPMAPLAYOUT_BELOW << 1) |
494 (((depth_irb->Base.Base.Width + tile_x) - 1) << 6) |
495 (((depth_irb->Base.Base.Height + tile_y) - 1) << 19));
496 OUT_BATCH(0);
497
498 if (intel->is_g4x || intel->gen >= 5)
499 OUT_BATCH(tile_x | (tile_y << 16));
500 else
501 assert(tile_x == 0 && tile_y == 0);
502
503 if (intel->gen >= 6)
504 OUT_BATCH(0);
505
506 ADVANCE_BATCH();
507 }
508
509 if (hiz_region || separate_stencil) {
510 /*
511 * In the 3DSTATE_DEPTH_BUFFER batch emitted above, the 'separate
512 * stencil enable' and 'hiz enable' bits were set. Therefore we must
513 * emit 3DSTATE_HIER_DEPTH_BUFFER and 3DSTATE_STENCIL_BUFFER. Even if
514 * there is no stencil buffer, 3DSTATE_STENCIL_BUFFER must be emitted;
515 * failure to do so causes hangs on gen5 and a stall on gen6.
516 */
517
518 /* Emit hiz buffer. */
519 if (hiz_region) {
520 uint32_t hiz_offset =
521 intel_region_get_aligned_offset(hiz_region,
522 draw_x & ~tile_mask_x,
523 (draw_y & ~tile_mask_y) / 2,
524 false);
525
526 BEGIN_BATCH(3);
527 OUT_BATCH((_3DSTATE_HIER_DEPTH_BUFFER << 16) | (3 - 2));
528 OUT_BATCH(hiz_region->pitch * hiz_region->cpp - 1);
529 OUT_RELOC(hiz_region->bo,
530 I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER,
531 hiz_offset);
532 ADVANCE_BATCH();
533 } else {
534 BEGIN_BATCH(3);
535 OUT_BATCH((_3DSTATE_HIER_DEPTH_BUFFER << 16) | (3 - 2));
536 OUT_BATCH(0);
537 OUT_BATCH(0);
538 ADVANCE_BATCH();
539 }
540
541 /* Emit stencil buffer. */
542 if (separate_stencil) {
543 struct intel_region *region = stencil_mt->region;
544
545 /* Note: we can't compute the stencil offset using
546 * intel_region_get_aligned_offset(), because stencil_region claims
547 * that the region is untiled; in fact it's W tiled.
548 */
549 uint32_t stencil_offset =
550 (draw_y & ~tile_mask_y) * region->pitch +
551 (draw_x & ~tile_mask_x) * 64;
552
553 BEGIN_BATCH(3);
554 OUT_BATCH((_3DSTATE_STENCIL_BUFFER << 16) | (3 - 2));
555 /* The stencil buffer has quirky pitch requirements. From Vol 2a,
556 * 11.5.6.2.1 3DSTATE_STENCIL_BUFFER, field "Surface Pitch":
557 * The pitch must be set to 2x the value computed based on width, as
558 * the stencil buffer is stored with two rows interleaved.
559 */
560 OUT_BATCH(2 * region->pitch * region->cpp - 1);
561 OUT_RELOC(region->bo,
562 I915_GEM_DOMAIN_RENDER, I915_GEM_DOMAIN_RENDER,
563 stencil_offset);
564 ADVANCE_BATCH();
565 } else {
566 BEGIN_BATCH(3);
567 OUT_BATCH((_3DSTATE_STENCIL_BUFFER << 16) | (3 - 2));
568 OUT_BATCH(0);
569 OUT_BATCH(0);
570 ADVANCE_BATCH();
571 }
572 }
573
574 /*
575 * On Gen >= 6, emit clear params for safety. If using hiz, then clear
576 * params must be emitted.
577 *
578 * From Section 2.11.5.6.4.1 3DSTATE_CLEAR_PARAMS:
579 * 3DSTATE_CLEAR_PARAMS packet must follow the DEPTH_BUFFER_STATE packet
580 * when HiZ is enabled and the DEPTH_BUFFER_STATE changes.
581 */
582 if (intel->gen >= 6 || hiz_region) {
583 if (intel->gen == 6)
584 intel_emit_post_sync_nonzero_flush(intel);
585
586 BEGIN_BATCH(2);
587 OUT_BATCH(_3DSTATE_CLEAR_PARAMS << 16 |
588 GEN5_DEPTH_CLEAR_VALID |
589 (2 - 2));
590 OUT_BATCH(depth_irb ? depth_irb->mt->depth_clear_value : 0);
591 ADVANCE_BATCH();
592 }
593 }
594
595 const struct brw_tracked_state brw_depthbuffer = {
596 .dirty = {
597 .mesa = _NEW_BUFFERS,
598 .brw = BRW_NEW_BATCH,
599 .cache = 0,
600 },
601 .emit = emit_depthbuffer,
602 };
603
604
605
606 /***********************************************************************
607 * Polygon stipple packet
608 */
609
upload_polygon_stipple(struct brw_context * brw)610 static void upload_polygon_stipple(struct brw_context *brw)
611 {
612 struct intel_context *intel = &brw->intel;
613 struct gl_context *ctx = &brw->intel.ctx;
614 GLuint i;
615
616 /* _NEW_POLYGON */
617 if (!ctx->Polygon.StippleFlag)
618 return;
619
620 if (intel->gen == 6)
621 intel_emit_post_sync_nonzero_flush(intel);
622
623 BEGIN_BATCH(33);
624 OUT_BATCH(_3DSTATE_POLY_STIPPLE_PATTERN << 16 | (33 - 2));
625
626 /* Polygon stipple is provided in OpenGL order, i.e. bottom
627 * row first. If we're rendering to a window (i.e. the
628 * default frame buffer object, 0), then we need to invert
629 * it to match our pixel layout. But if we're rendering
630 * to a FBO (i.e. any named frame buffer object), we *don't*
631 * need to invert - we already match the layout.
632 */
633 if (_mesa_is_winsys_fbo(ctx->DrawBuffer)) {
634 for (i = 0; i < 32; i++)
635 OUT_BATCH(ctx->PolygonStipple[31 - i]); /* invert */
636 }
637 else {
638 for (i = 0; i < 32; i++)
639 OUT_BATCH(ctx->PolygonStipple[i]);
640 }
641 CACHED_BATCH();
642 }
643
644 const struct brw_tracked_state brw_polygon_stipple = {
645 .dirty = {
646 .mesa = (_NEW_POLYGONSTIPPLE |
647 _NEW_POLYGON),
648 .brw = BRW_NEW_CONTEXT,
649 .cache = 0
650 },
651 .emit = upload_polygon_stipple
652 };
653
654
655 /***********************************************************************
656 * Polygon stipple offset packet
657 */
658
upload_polygon_stipple_offset(struct brw_context * brw)659 static void upload_polygon_stipple_offset(struct brw_context *brw)
660 {
661 struct intel_context *intel = &brw->intel;
662 struct gl_context *ctx = &brw->intel.ctx;
663
664 /* _NEW_POLYGON */
665 if (!ctx->Polygon.StippleFlag)
666 return;
667
668 if (intel->gen == 6)
669 intel_emit_post_sync_nonzero_flush(intel);
670
671 BEGIN_BATCH(2);
672 OUT_BATCH(_3DSTATE_POLY_STIPPLE_OFFSET << 16 | (2-2));
673
674 /* _NEW_BUFFERS
675 *
676 * If we're drawing to a system window we have to invert the Y axis
677 * in order to match the OpenGL pixel coordinate system, and our
678 * offset must be matched to the window position. If we're drawing
679 * to a user-created FBO then our native pixel coordinate system
680 * works just fine, and there's no window system to worry about.
681 */
682 if (_mesa_is_winsys_fbo(brw->intel.ctx.DrawBuffer))
683 OUT_BATCH((32 - (ctx->DrawBuffer->Height & 31)) & 31);
684 else
685 OUT_BATCH(0);
686 CACHED_BATCH();
687 }
688
689 const struct brw_tracked_state brw_polygon_stipple_offset = {
690 .dirty = {
691 .mesa = (_NEW_BUFFERS |
692 _NEW_POLYGON),
693 .brw = BRW_NEW_CONTEXT,
694 .cache = 0
695 },
696 .emit = upload_polygon_stipple_offset
697 };
698
699 /**********************************************************************
700 * AA Line parameters
701 */
upload_aa_line_parameters(struct brw_context * brw)702 static void upload_aa_line_parameters(struct brw_context *brw)
703 {
704 struct intel_context *intel = &brw->intel;
705 struct gl_context *ctx = &brw->intel.ctx;
706
707 if (!ctx->Line.SmoothFlag || !brw->has_aa_line_parameters)
708 return;
709
710 if (intel->gen == 6)
711 intel_emit_post_sync_nonzero_flush(intel);
712
713 OUT_BATCH(_3DSTATE_AA_LINE_PARAMETERS << 16 | (3 - 2));
714 /* use legacy aa line coverage computation */
715 OUT_BATCH(0);
716 OUT_BATCH(0);
717 CACHED_BATCH();
718 }
719
720 const struct brw_tracked_state brw_aa_line_parameters = {
721 .dirty = {
722 .mesa = _NEW_LINE,
723 .brw = BRW_NEW_CONTEXT,
724 .cache = 0
725 },
726 .emit = upload_aa_line_parameters
727 };
728
729 /***********************************************************************
730 * Line stipple packet
731 */
732
upload_line_stipple(struct brw_context * brw)733 static void upload_line_stipple(struct brw_context *brw)
734 {
735 struct intel_context *intel = &brw->intel;
736 struct gl_context *ctx = &brw->intel.ctx;
737 GLfloat tmp;
738 GLint tmpi;
739
740 if (!ctx->Line.StippleFlag)
741 return;
742
743 if (intel->gen == 6)
744 intel_emit_post_sync_nonzero_flush(intel);
745
746 BEGIN_BATCH(3);
747 OUT_BATCH(_3DSTATE_LINE_STIPPLE_PATTERN << 16 | (3 - 2));
748 OUT_BATCH(ctx->Line.StipplePattern);
749 tmp = 1.0 / (GLfloat) ctx->Line.StippleFactor;
750 tmpi = tmp * (1<<13);
751 OUT_BATCH(tmpi << 16 | ctx->Line.StippleFactor);
752 CACHED_BATCH();
753 }
754
755 const struct brw_tracked_state brw_line_stipple = {
756 .dirty = {
757 .mesa = _NEW_LINE,
758 .brw = BRW_NEW_CONTEXT,
759 .cache = 0
760 },
761 .emit = upload_line_stipple
762 };
763
764
765 /***********************************************************************
766 * Misc invariant state packets
767 */
768
upload_invariant_state(struct brw_context * brw)769 static void upload_invariant_state( struct brw_context *brw )
770 {
771 struct intel_context *intel = &brw->intel;
772
773 /* 3DSTATE_SIP, 3DSTATE_MULTISAMPLE, etc. are nonpipelined. */
774 if (intel->gen == 6)
775 intel_emit_post_sync_nonzero_flush(intel);
776
777 /* Select the 3D pipeline (as opposed to media) */
778 BEGIN_BATCH(1);
779 OUT_BATCH(brw->CMD_PIPELINE_SELECT << 16 | 0);
780 ADVANCE_BATCH();
781
782 if (intel->gen < 6) {
783 /* Disable depth offset clamping. */
784 BEGIN_BATCH(2);
785 OUT_BATCH(_3DSTATE_GLOBAL_DEPTH_OFFSET_CLAMP << 16 | (2 - 2));
786 OUT_BATCH_F(0.0);
787 ADVANCE_BATCH();
788 }
789
790 if (intel->gen == 6) {
791 int i;
792
793 for (i = 0; i < 4; i++) {
794 BEGIN_BATCH(4);
795 OUT_BATCH(_3DSTATE_GS_SVB_INDEX << 16 | (4 - 2));
796 OUT_BATCH(i << SVB_INDEX_SHIFT);
797 OUT_BATCH(0);
798 OUT_BATCH(0xffffffff);
799 ADVANCE_BATCH();
800 }
801 }
802
803 BEGIN_BATCH(2);
804 OUT_BATCH(CMD_STATE_SIP << 16 | (2 - 2));
805 OUT_BATCH(0);
806 ADVANCE_BATCH();
807
808 BEGIN_BATCH(1);
809 OUT_BATCH(brw->CMD_VF_STATISTICS << 16 |
810 (unlikely(INTEL_DEBUG & DEBUG_STATS) ? 1 : 0));
811 ADVANCE_BATCH();
812 }
813
814 const struct brw_tracked_state brw_invariant_state = {
815 .dirty = {
816 .mesa = 0,
817 .brw = BRW_NEW_CONTEXT,
818 .cache = 0
819 },
820 .emit = upload_invariant_state
821 };
822
823 /**
824 * Define the base addresses which some state is referenced from.
825 *
826 * This allows us to avoid having to emit relocations for the objects,
827 * and is actually required for binding table pointers on gen6.
828 *
829 * Surface state base address covers binding table pointers and
830 * surface state objects, but not the surfaces that the surface state
831 * objects point to.
832 */
upload_state_base_address(struct brw_context * brw)833 static void upload_state_base_address( struct brw_context *brw )
834 {
835 struct intel_context *intel = &brw->intel;
836
837 /* FINISHME: According to section 3.6.1 "STATE_BASE_ADDRESS" of
838 * vol1a of the G45 PRM, MI_FLUSH with the ISC invalidate should be
839 * programmed prior to STATE_BASE_ADDRESS.
840 *
841 * However, given that the instruction SBA (general state base
842 * address) on this chipset is always set to 0 across X and GL,
843 * maybe this isn't required for us in particular.
844 */
845
846 if (intel->gen >= 6) {
847 if (intel->gen == 6)
848 intel_emit_post_sync_nonzero_flush(intel);
849
850 BEGIN_BATCH(10);
851 OUT_BATCH(CMD_STATE_BASE_ADDRESS << 16 | (10 - 2));
852 /* General state base address: stateless DP read/write requests */
853 OUT_BATCH(1);
854 /* Surface state base address:
855 * BINDING_TABLE_STATE
856 * SURFACE_STATE
857 */
858 OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0, 1);
859 /* Dynamic state base address:
860 * SAMPLER_STATE
861 * SAMPLER_BORDER_COLOR_STATE
862 * CLIP, SF, WM/CC viewport state
863 * COLOR_CALC_STATE
864 * DEPTH_STENCIL_STATE
865 * BLEND_STATE
866 * Push constants (when INSTPM: CONSTANT_BUFFER Address Offset
867 * Disable is clear, which we rely on)
868 */
869 OUT_RELOC(intel->batch.bo, (I915_GEM_DOMAIN_RENDER |
870 I915_GEM_DOMAIN_INSTRUCTION), 0, 1);
871
872 OUT_BATCH(1); /* Indirect object base address: MEDIA_OBJECT data */
873 OUT_RELOC(brw->cache.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
874 1); /* Instruction base address: shader kernels (incl. SIP) */
875
876 OUT_BATCH(1); /* General state upper bound */
877 /* Dynamic state upper bound. Although the documentation says that
878 * programming it to zero will cause it to be ignored, that is a lie.
879 * If this isn't programmed to a real bound, the sampler border color
880 * pointer is rejected, causing border color to mysteriously fail.
881 */
882 OUT_BATCH(0xfffff001);
883 OUT_BATCH(1); /* Indirect object upper bound */
884 OUT_BATCH(1); /* Instruction access upper bound */
885 ADVANCE_BATCH();
886 } else if (intel->gen == 5) {
887 BEGIN_BATCH(8);
888 OUT_BATCH(CMD_STATE_BASE_ADDRESS << 16 | (8 - 2));
889 OUT_BATCH(1); /* General state base address */
890 OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0,
891 1); /* Surface state base address */
892 OUT_BATCH(1); /* Indirect object base address */
893 OUT_RELOC(brw->cache.bo, I915_GEM_DOMAIN_INSTRUCTION, 0,
894 1); /* Instruction base address */
895 OUT_BATCH(0xfffff001); /* General state upper bound */
896 OUT_BATCH(1); /* Indirect object upper bound */
897 OUT_BATCH(1); /* Instruction access upper bound */
898 ADVANCE_BATCH();
899 } else {
900 BEGIN_BATCH(6);
901 OUT_BATCH(CMD_STATE_BASE_ADDRESS << 16 | (6 - 2));
902 OUT_BATCH(1); /* General state base address */
903 OUT_RELOC(intel->batch.bo, I915_GEM_DOMAIN_SAMPLER, 0,
904 1); /* Surface state base address */
905 OUT_BATCH(1); /* Indirect object base address */
906 OUT_BATCH(1); /* General state upper bound */
907 OUT_BATCH(1); /* Indirect object upper bound */
908 ADVANCE_BATCH();
909 }
910
911 /* According to section 3.6.1 of VOL1 of the 965 PRM,
912 * STATE_BASE_ADDRESS updates require a reissue of:
913 *
914 * 3DSTATE_PIPELINE_POINTERS
915 * 3DSTATE_BINDING_TABLE_POINTERS
916 * MEDIA_STATE_POINTERS
917 *
918 * and this continues through Ironlake. The Sandy Bridge PRM, vol
919 * 1 part 1 says that the folowing packets must be reissued:
920 *
921 * 3DSTATE_CC_POINTERS
922 * 3DSTATE_BINDING_TABLE_POINTERS
923 * 3DSTATE_SAMPLER_STATE_POINTERS
924 * 3DSTATE_VIEWPORT_STATE_POINTERS
925 * MEDIA_STATE_POINTERS
926 *
927 * Those are always reissued following SBA updates anyway (new
928 * batch time), except in the case of the program cache BO
929 * changing. Having a separate state flag makes the sequence more
930 * obvious.
931 */
932
933 brw->state.dirty.brw |= BRW_NEW_STATE_BASE_ADDRESS;
934 }
935
936 const struct brw_tracked_state brw_state_base_address = {
937 .dirty = {
938 .mesa = 0,
939 .brw = (BRW_NEW_BATCH |
940 BRW_NEW_PROGRAM_CACHE),
941 .cache = 0,
942 },
943 .emit = upload_state_base_address
944 };
945