1 // This file was extracted from the TCG Published
2 // Trusted Platform Module Library
3 // Part 4: Supporting Routines
4 // Family "2.0"
5 // Level 00 Revision 01.16
6 // October 30, 2014
7
8 #define MANUFACTURE_C
9 #include "InternalRoutines.h"
10 #include "Global.h"
11 //
12 //
13 // Functions
14 //
15 // TPM_Manufacture()
16 //
17 // This function initializes the TPM values in preparation for the TPM's first use. This function will fail if
18 // previously called. The TPM can be re-manufactured by calling TPM_Teardown() first and then calling this
19 // function again.
20 //
21 // Return Value Meaning
22 //
23 // 0 success
24 // 1 manufacturing process previously performed
25 //
26 LIB_EXPORT int
TPM_Manufacture(BOOL firstTime)27 TPM_Manufacture(
28 BOOL firstTime // IN: indicates if this is the first call from
29 // main()
30 )
31 {
32 TPM_SU orderlyShutdown;
33 UINT64 totalResetCount = 0;
34 // If TPM has been manufactured, return indication.
35 if(!firstTime && g_manufactured)
36 return 1;
37 // initialize crypto units
38 //CryptInitUnits();
39 //
40 s_selfHealTimer = 0;
41 s_lockoutTimer = 0;
42 s_DAPendingOnNV = FALSE;
43 // initialize NV
44 NvInit();
45 #ifdef _DRBG_STATE_SAVE
46 // Initialize the drbg. This needs to come before the install
47 // of the hierarchies
48 if(!_cpri__Startup()) // Have to start the crypto units first
49 FAIL(FATAL_ERROR_INTERNAL);
50 _cpri__DrbgGetPutState(PUT_STATE, 0, NULL);
51 #endif
52 // default configuration for PCR
53 PCRSimStart();
54 // initialize pre-installed hierarchy data
55 // This should happen after NV is initialized because hierarchy data is
56 // stored in NV.
57 HierarchyPreInstall_Init();
58 // initialize dictionary attack parameters
59 DAPreInstall_Init();
60 // initialize PP list
61 PhysicalPresencePreInstall_Init();
62 // initialize command audit list
63 CommandAuditPreInstall_Init();
64 // first start up is required to be Startup(CLEAR)
65 orderlyShutdown = TPM_SU_CLEAR;
66 NvWriteReserved(NV_ORDERLY, &orderlyShutdown);
67 // initialize the firmware version
68 gp.firmwareV1 = FIRMWARE_V1;
69 #ifdef FIRMWARE_V2
70 gp.firmwareV2 = FIRMWARE_V2;
71 #else
72 gp.firmwareV2 = 0;
73 #endif
74 NvWriteReserved(NV_FIRMWARE_V1, &gp.firmwareV1);
75 NvWriteReserved(NV_FIRMWARE_V2, &gp.firmwareV2);
76 // initialize the total reset counter to 0
77 NvWriteReserved(NV_TOTAL_RESET_COUNT, &totalResetCount);
78 // initialize the clock stuff
79 go.clock = 0;
80 go.clockSafe = YES;
81 #ifdef _DRBG_STATE_SAVE
82 // initialize the current DRBG state in NV
83 _cpri__DrbgGetPutState(GET_STATE, sizeof(go.drbgState), (BYTE *)&go.drbgState);
84 #endif
85 NvWriteReserved(NV_ORDERLY_DATA, &go);
86 // Commit NV writes. Manufacture process is an artificial process existing
87 // only in simulator environment and it is not defined in the specification
88 // that what should be the expected behavior if the NV write fails at this
89 // point. Therefore, it is assumed the NV write here is always success and
90 // no return code of this function is checked.
91 NvCommit();
92 g_manufactured = TRUE;
93 return 0;
94 }
95 //
96 //
97 // TPM_TearDown()
98 //
99 // This function prepares the TPM for re-manufacture. It should not be implemented in anything other than a
100 // simulated TPM.
101 // In this implementation, all that is needs is to stop the cryptographic units and set a flag to indicate that the
102 // TPM can be re-manufactured. This should be all that is necessary to start the manufacturing process
103 // again.
104 //
105 // Return Value Meaning
106 //
107 // 0 success
108 // 1 TPM not previously manufactured
109 //
110 LIB_EXPORT int
TPM_TearDown(void)111 TPM_TearDown(
112 void
113 )
114 {
115 // stop crypt units
116 CryptStopUnits();
117 g_manufactured = FALSE;
118 return 0;
119 }
120