1 /* 2 * Copyright 2001-2008 Texas Instruments - http://www.ti.com/ 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 /* 18 * ======== errbase.h ======== 19 * DSP-BIOS Bridge driver support functions for TI OMAP processors. 20 * Description: 21 * Central repository for DSP/BIOS Bridge error and status code. 22 * 23 * Error codes are of the form: 24 * [<MODULE>]_E<ERRORCODE> 25 * 26 * Success codes are of the form: 27 * [<MODULE>]_S<SUCCESSCODE> 28 * 29 *! Revision History: 30 *! ================ 31 *! 24-Jan-2003 map Added DSP_SALREADYLOADED for persistent library checking 32 *! 23-Nov-2002 gp: Minor comment cleanup. 33 *! 13-May-2002 sg Added DSP_SALREADYASLEEP and DSP_SALREADYWAKE. 34 *! 18-Feb-2002 mk: Added DSP_EOVERLAYMEMORY, EFWRITE, ENOSECT. 35 *! 31-Jan-2002 mk: Added definitions of DSP_STRUE and DSP_SFALSE. 36 *! 29-Jan-2002 mk: Added definition of CFG_E_INSUFFICIENTBUFSIZE. 37 *! 24-Oct-2001 sp: Consolidated all the error codes into this file. 38 *! 24-Jul-2001 mk: Type-casted all definitions of WSX_STATUS types for 39 *! removal of compile warnings. 40 *! 22-Nov-1999 kc: Changes from code review. 41 *! 18-Aug-1999 rr: Ported From WSX. 42 *! 29-May-1996 gp: Removed WCD_ and WMD_ error ranges. Redefined format of 43 *! error codes. 44 *! 10-May-1996 gp: Created. 45 */ 46 47 #ifndef ERRBASE_ 48 #define ERRBASE_ 49 50 #ifdef __cplusplus 51 extern "C" { 52 #endif 53 54 /* ========================================================================== */ 55 /* Base of generic errors and component errors */ 56 /* ========================================================================== */ 57 #define DSP_SBASE (DSP_STATUS)0x00008000 58 #define DSP_EBASE (DSP_STATUS)0x80008000 59 60 #define DSP_COMP_EBASE (DSP_STATUS)0x80040200 61 #define DSP_COMP_ELAST (DSP_STATUS)0x80047fff 62 63 /* ========================================================================== */ 64 /* SUCCESS Codes */ 65 /* ========================================================================== */ 66 67 /* -------------------------------------------------------------------------- */ 68 /* Generic success code */ 69 /* -------------------------------------------------------------------------- */ 70 #define DSP_SOK (DSP_SBASE + 0) 71 72 /* -------------------------------------------------------------------------- */ 73 /* GPP is already attached to this DSP processor */ 74 /* -------------------------------------------------------------------------- */ 75 #define DSP_SALREADYATTACHED (DSP_SBASE + 1) 76 77 /* -------------------------------------------------------------------------- */ 78 /* This is the last object available for enumeration. */ 79 /* -------------------------------------------------------------------------- */ 80 #define DSP_SENUMCOMPLETE (DSP_SBASE + 2) 81 82 /* -------------------------------------------------------------------------- */ 83 /* The DSP is already asleep. */ 84 /* -------------------------------------------------------------------------- */ 85 #define DSP_SALREADYASLEEP (DSP_SBASE + 3) 86 87 /* -------------------------------------------------------------------------- */ 88 /* The DSP is already awake. */ 89 /* -------------------------------------------------------------------------- */ 90 #define DSP_SALREADYAWAKE (DSP_SBASE + 4) 91 92 /* -------------------------------------------------------------------------- */ 93 /* TRUE */ 94 /* -------------------------------------------------------------------------- */ 95 #define DSP_STRUE (DSP_SBASE + 5) 96 97 /* -------------------------------------------------------------------------- */ 98 /* FALSE */ 99 /* -------------------------------------------------------------------------- */ 100 #define DSP_SFALSE (DSP_SBASE + 6) 101 102 /* -------------------------------------------------------------------------- */ 103 /* A library contains no dependent library references */ 104 /* -------------------------------------------------------------------------- */ 105 #define DSP_SNODEPENDENTLIBS (DSP_SBASE + 7) 106 107 /* -------------------------------------------------------------------------- */ 108 /* A persistent library is already loaded by the dynamic loader */ 109 /* -------------------------------------------------------------------------- */ 110 #define DSP_SALREADYLOADED (DSP_SBASE + 8) 111 112 /* -------------------------------------------------------------------------- */ 113 /* Some error occured, but it is OK to continue */ 114 /* -------------------------------------------------------------------------- */ 115 #define DSP_OKTO_CONTINUE (DSP_SBASE + 9) 116 117 /* ========================================================================== */ 118 /* FAILURE Codes */ 119 /* ========================================================================== */ 120 121 /* -------------------------------------------------------------------------- */ 122 /* The caller does not have access privileges to call this function */ 123 /* -------------------------------------------------------------------------- */ 124 #define DSP_EACCESSDENIED (DSP_EBASE + 0) 125 126 /* -------------------------------------------------------------------------- */ 127 /* The Specified Connection already exists */ 128 /* -------------------------------------------------------------------------- */ 129 #define DSP_EALREADYCONNECTED (DSP_EBASE + 1) 130 131 /* -------------------------------------------------------------------------- */ 132 /* The GPP must be detached from the DSP before this function is called */ 133 /* -------------------------------------------------------------------------- */ 134 #define DSP_EATTACHED (DSP_EBASE + 2) 135 136 /* -------------------------------------------------------------------------- */ 137 /* During enumeration a change in the number or properties of the objects */ 138 /* has occurred. */ 139 /* -------------------------------------------------------------------------- */ 140 #define DSP_ECHANGEDURINGENUM (DSP_EBASE + 3) 141 142 /* -------------------------------------------------------------------------- */ 143 /* An error occurred while parsing the DSP executable file */ 144 /* -------------------------------------------------------------------------- */ 145 #define DSP_ECORRUPTFILE (DSP_EBASE + 4) 146 147 /* -------------------------------------------------------------------------- */ 148 /* A failure occurred during a delete operation */ 149 /* -------------------------------------------------------------------------- */ 150 #define DSP_EDELETE (DSP_EBASE + 5) 151 152 /* -------------------------------------------------------------------------- */ 153 /* The specified direction is invalid */ 154 /* -------------------------------------------------------------------------- */ 155 #define DSP_EDIRECTION (DSP_EBASE + 6) 156 157 /* -------------------------------------------------------------------------- */ 158 /* A stream has been issued the maximum number of buffers allowed in the */ 159 /* stream at once ; buffers must be reclaimed from the stream before any */ 160 /* more can be issued. */ 161 /* -------------------------------------------------------------------------- */ 162 #define DSP_ESTREAMFULL (DSP_EBASE + 7) 163 164 /* -------------------------------------------------------------------------- */ 165 /* A general failure occurred */ 166 /* -------------------------------------------------------------------------- */ 167 #define DSP_EFAIL (DSP_EBASE + 8) 168 169 /* -------------------------------------------------------------------------- */ 170 /* The specified executable file could not be found. */ 171 /* -------------------------------------------------------------------------- */ 172 #define DSP_EFILE (DSP_EBASE + 9) 173 174 /* -------------------------------------------------------------------------- */ 175 /* The specified handle is invalid. */ 176 /* -------------------------------------------------------------------------- */ 177 #define DSP_EHANDLE (DSP_EBASE + 0xa) 178 179 /* -------------------------------------------------------------------------- */ 180 /* An invalid argument was specified. */ 181 /* -------------------------------------------------------------------------- */ 182 #define DSP_EINVALIDARG (DSP_EBASE + 0xb) 183 184 /* -------------------------------------------------------------------------- */ 185 /* A memory allocation failure occurred. */ 186 /* -------------------------------------------------------------------------- */ 187 #define DSP_EMEMORY (DSP_EBASE + 0xc) 188 189 /* -------------------------------------------------------------------------- */ 190 /* The requested operation is invalid for this node type. */ 191 /* -------------------------------------------------------------------------- */ 192 #define DSP_ENODETYPE (DSP_EBASE + 0xd) 193 194 /* -------------------------------------------------------------------------- */ 195 /* No error text was found for the specified error code. */ 196 /* -------------------------------------------------------------------------- */ 197 #define DSP_ENOERRTEXT (DSP_EBASE + 0xe) 198 199 /* -------------------------------------------------------------------------- */ 200 /* No more connections can be made for this node. */ 201 /* -------------------------------------------------------------------------- */ 202 #define DSP_ENOMORECONNECTIONS (DSP_EBASE + 0xf) 203 204 /* -------------------------------------------------------------------------- */ 205 /* The indicated operation is not supported. */ 206 /* -------------------------------------------------------------------------- */ 207 #define DSP_ENOTIMPL (DSP_EBASE + 0x10) 208 209 /* -------------------------------------------------------------------------- */ 210 /* I/O is currently pending. */ 211 /* -------------------------------------------------------------------------- */ 212 #define DSP_EPENDING (DSP_EBASE + 0x11) 213 214 /* -------------------------------------------------------------------------- */ 215 /* An invalid pointer was specified. */ 216 /* -------------------------------------------------------------------------- */ 217 #define DSP_EPOINTER (DSP_EBASE + 0x12) 218 219 /* -------------------------------------------------------------------------- */ 220 /* A parameter is specified outside its valid range. */ 221 /* -------------------------------------------------------------------------- */ 222 #define DSP_ERANGE (DSP_EBASE + 0x13) 223 224 /* -------------------------------------------------------------------------- */ 225 /* An invalid size parameter was specified. */ 226 /* -------------------------------------------------------------------------- */ 227 #define DSP_ESIZE (DSP_EBASE + 0x14) 228 229 /* -------------------------------------------------------------------------- */ 230 /* A stream creation failure occurred on the DSP. */ 231 /* -------------------------------------------------------------------------- */ 232 #define DSP_ESTREAM (DSP_EBASE + 0x15) 233 234 /* -------------------------------------------------------------------------- */ 235 /* A task creation failure occurred on the DSP. */ 236 /* -------------------------------------------------------------------------- */ 237 #define DSP_ETASK (DSP_EBASE + 0x16) 238 239 /* -------------------------------------------------------------------------- */ 240 /* A timeout occurred before the requested operation could complete. */ 241 /* -------------------------------------------------------------------------- */ 242 #define DSP_ETIMEOUT (DSP_EBASE + 0x17) 243 244 /* -------------------------------------------------------------------------- */ 245 /* A data truncation occurred, e.g., when requesting a descriptive error */ 246 /* string, not enough space was allocated for the complete error message. */ 247 /* -------------------------------------------------------------------------- */ 248 #define DSP_ETRUNCATED (DSP_EBASE + 0x18) 249 250 /* -------------------------------------------------------------------------- */ 251 /* A parameter is invalid. */ 252 /* -------------------------------------------------------------------------- */ 253 #define DSP_EVALUE (DSP_EBASE + 0x1a) 254 255 /* -------------------------------------------------------------------------- */ 256 /* The state of the specified object is incorrect for the requested */ 257 /* operation. */ 258 /* -------------------------------------------------------------------------- */ 259 #define DSP_EWRONGSTATE (DSP_EBASE + 0x1b) 260 261 /* -------------------------------------------------------------------------- */ 262 /* Symbol not found in the COFF file. DSPNode_Create will return this if */ 263 /* the iAlg function table for an xDAIS socket is not found in the COFF file. */ 264 /* In this case, force the symbol to be linked into the COFF file. */ 265 /* DSPNode_Create, DSPNode_Execute, and DSPNode_Delete will return this if */ 266 /* the create, execute, or delete phase function, respectively, could not be */ 267 /* found in the COFF file. */ 268 /* -------------------------------------------------------------------------- */ 269 #define DSP_ESYMBOL (DSP_EBASE + 0x1c) 270 271 /* -------------------------------------------------------------------------- */ 272 /* UUID not found in registry. */ 273 /* -------------------------------------------------------------------------- */ 274 #define DSP_EUUID (DSP_EBASE + 0x1d) 275 276 /* -------------------------------------------------------------------------- */ 277 /* Unable to read content of DCD data section ; this is typically caused by */ 278 /* improperly configured nodes. */ 279 /* -------------------------------------------------------------------------- */ 280 #define DSP_EDCDREADSECT (DSP_EBASE + 0x1e) 281 282 /* -------------------------------------------------------------------------- */ 283 /* Unable to decode DCD data section content ; this is typically caused by */ 284 /* changes to DSP/BIOS Bridge data structures. */ 285 /* -------------------------------------------------------------------------- */ 286 #define DSP_EDCDPARSESECT (DSP_EBASE + 0x1f) 287 288 /* -------------------------------------------------------------------------- */ 289 /* Unable to get pointer to DCD data section ; this is typically caused by */ 290 /* improperly configured UUIDs. */ 291 /* -------------------------------------------------------------------------- */ 292 #define DSP_EDCDGETSECT (DSP_EBASE + 0x20) 293 294 /* -------------------------------------------------------------------------- */ 295 /* Unable to load file containing DCD data section ; this is typically */ 296 /* caused by a missing COFF file. */ 297 /* -------------------------------------------------------------------------- */ 298 #define DSP_EDCDLOADBASE (DSP_EBASE + 0x21) 299 300 /* -------------------------------------------------------------------------- */ 301 /* The specified COFF file does not contain a valid node registration */ 302 /* section. */ 303 /* -------------------------------------------------------------------------- */ 304 #define DSP_EDCDNOAUTOREGISTER (DSP_EBASE + 0x22) 305 306 /* -------------------------------------------------------------------------- */ 307 /* A requested resource is not available. */ 308 /* -------------------------------------------------------------------------- */ 309 #define DSP_ERESOURCE (DSP_EBASE + 0x28) 310 311 /* -------------------------------------------------------------------------- */ 312 /* A critical error has occurred, and the DSP is being re-started. */ 313 /* -------------------------------------------------------------------------- */ 314 #define DSP_ERESTART (DSP_EBASE + 0x29) 315 316 /* -------------------------------------------------------------------------- */ 317 /* A DSP memory free operation failed. */ 318 /* -------------------------------------------------------------------------- */ 319 #define DSP_EFREE (DSP_EBASE + 0x2a) 320 321 /* -------------------------------------------------------------------------- */ 322 /* A DSP I/O free operation failed. */ 323 /* -------------------------------------------------------------------------- */ 324 #define DSP_EIOFREE (DSP_EBASE + 0x2b) 325 326 /* -------------------------------------------------------------------------- */ 327 /* Multiple instances are not allowed. */ 328 /* -------------------------------------------------------------------------- */ 329 #define DSP_EMULINST (DSP_EBASE + 0x2c) 330 331 /* -------------------------------------------------------------------------- */ 332 /* A specified entity was not found. */ 333 /* -------------------------------------------------------------------------- */ 334 #define DSP_ENOTFOUND (DSP_EBASE + 0x2d) 335 336 /* -------------------------------------------------------------------------- */ 337 /* A DSP I/O resource is not available. */ 338 /* -------------------------------------------------------------------------- */ 339 #define DSP_EOUTOFIO (DSP_EBASE + 0x2e) 340 341 /* -------------------------------------------------------------------------- */ 342 /* A shared memory buffer contained in a message or stream could not be */ 343 /* mapped to the GPP client process's virtual space. */ 344 /* -------------------------------------------------------------------------- */ 345 #define DSP_ETRANSLATE (DSP_EBASE + 0x2f) 346 347 /* -------------------------------------------------------------------------- */ 348 /* File or section load write function failed to write to DSP */ 349 /* -------------------------------------------------------------------------- */ 350 #define DSP_EFWRITE (DSP_EBASE + 0x31) 351 352 /* -------------------------------------------------------------------------- */ 353 /* Unable to find a named section in DSP executable */ 354 /* -------------------------------------------------------------------------- */ 355 #define DSP_ENOSECT (DSP_EBASE + 0x32) 356 357 /* -------------------------------------------------------------------------- */ 358 /* Unable to open file */ 359 /* -------------------------------------------------------------------------- */ 360 #define DSP_EFOPEN (DSP_EBASE + 0x33) 361 362 /* -------------------------------------------------------------------------- */ 363 /* Unable to read file */ 364 /* -------------------------------------------------------------------------- */ 365 #define DSP_EFREAD (DSP_EBASE + 0x34) 366 367 /* -------------------------------------------------------------------------- */ 368 /* A non-existent memory segment identifier was specified */ 369 /* -------------------------------------------------------------------------- */ 370 #define DSP_EOVERLAYMEMORY (DSP_EBASE + 0x37) 371 372 /* -------------------------------------------------------------------------- */ 373 /* Invalid segment ID */ 374 /* -------------------------------------------------------------------------- */ 375 #define DSP_EBADSEGID (DSP_EBASE + 0x38) 376 377 /* -------------------------------------------------------------------------- */ 378 /* Invalid alignment */ 379 /* -------------------------------------------------------------------------- */ 380 #define DSP_EALIGNMENT (DSP_EBASE + 0x39) 381 382 /* -------------------------------------------------------------------------- */ 383 /* Invalid stream mode */ 384 /* -------------------------------------------------------------------------- */ 385 #define DSP_ESTRMMODE (DSP_EBASE + 0x3a) 386 387 /* -------------------------------------------------------------------------- */ 388 /* Nodes not connected */ 389 /* -------------------------------------------------------------------------- */ 390 #define DSP_ENOTCONNECTED (DSP_EBASE + 0x3b) 391 392 /* -------------------------------------------------------------------------- */ 393 /* Not shared memory */ 394 /* -------------------------------------------------------------------------- */ 395 #define DSP_ENOTSHAREDMEM (DSP_EBASE + 0x3c) 396 397 /* -------------------------------------------------------------------------- */ 398 /* Error occurred in a dynamic loader library function */ 399 /* -------------------------------------------------------------------------- */ 400 #define DSP_EDYNLOAD (DSP_EBASE + 0x3d) 401 402 /* -------------------------------------------------------------------------- */ 403 /* Device in 'sleep/suspend' mode due to DPM */ 404 /* -------------------------------------------------------------------------- */ 405 #define DSP_EDPMSUSPEND (DSP_EBASE + 0x3e) 406 407 /* -------------------------------------------------------------------------- */ 408 /* A node-specific error has occurred. */ 409 /* -------------------------------------------------------------------------- */ 410 #define DSP_EUSER1 (DSP_EBASE + 0x40) 411 #define DSP_EUSER2 (DSP_EBASE + 0x41) 412 #define DSP_EUSER3 (DSP_EBASE + 0x42) 413 #define DSP_EUSER4 (DSP_EBASE + 0x43) 414 #define DSP_EUSER5 (DSP_EBASE + 0x44) 415 #define DSP_EUSER6 (DSP_EBASE + 0x45) 416 #define DSP_EUSER7 (DSP_EBASE + 0x46) 417 #define DSP_EUSER8 (DSP_EBASE + 0x47) 418 #define DSP_EUSER9 (DSP_EBASE + 0x48) 419 #define DSP_EUSER10 (DSP_EBASE + 0x49) 420 #define DSP_EUSER11 (DSP_EBASE + 0x4a) 421 #define DSP_EUSER12 (DSP_EBASE + 0x4b) 422 #define DSP_EUSER13 (DSP_EBASE + 0x4c) 423 #define DSP_EUSER14 (DSP_EBASE + 0x4d) 424 #define DSP_EUSER15 (DSP_EBASE + 0x4e) 425 #define DSP_EUSER16 (DSP_EBASE + 0x4f) 426 427 /* ========================================================================== */ 428 /* FAILURE Codes : DEV */ 429 /* ========================================================================== */ 430 #define DEV_EBASE (DSP_COMP_EBASE + 0x000) 431 432 /* -------------------------------------------------------------------------- */ 433 /* The mini-driver expected a newer version of the class driver. */ 434 /* -------------------------------------------------------------------------- */ 435 #define DEV_E_NEWWMD (DEV_EBASE + 0x00) 436 437 /* -------------------------------------------------------------------------- */ 438 /* WMD_DRV_Entry function returned a NULL function interface table. */ 439 /* -------------------------------------------------------------------------- */ 440 #define DEV_E_NULLWMDINTF (DEV_EBASE + 0x01) 441 442 /* ========================================================================== */ 443 /* FAILURE Codes : LDR */ 444 /* ========================================================================== */ 445 #define LDR_EBASE (DSP_COMP_EBASE + 0x100) 446 447 /* -------------------------------------------------------------------------- */ 448 /* Insufficient memory to export class driver services. */ 449 /* -------------------------------------------------------------------------- */ 450 #define LDR_E_NOMEMORY (LDR_EBASE + 0x00) 451 452 /* -------------------------------------------------------------------------- */ 453 /* Unable to find WMD file in system directory. */ 454 /* -------------------------------------------------------------------------- */ 455 #define LDR_E_FILEUNABLETOOPEN (LDR_EBASE + 0x01) 456 457 /* ========================================================================== */ 458 /* FAILURE Codes : CFG */ 459 /* ========================================================================== */ 460 #define CFG_EBASE (DSP_COMP_EBASE + 0x200) 461 462 /* -------------------------------------------------------------------------- */ 463 /* Invalid pointer passed into a configuration module function */ 464 /* -------------------------------------------------------------------------- */ 465 #define CFG_E_INVALIDPOINTER (CFG_EBASE + 0x00) 466 467 /* -------------------------------------------------------------------------- */ 468 /* Invalid device node handle passed into a configuration module function. */ 469 /* -------------------------------------------------------------------------- */ 470 #define CFG_E_INVALIDHDEVNODE (CFG_EBASE + 0x01) 471 472 /* -------------------------------------------------------------------------- */ 473 /* Unable to retrieve resource information from the registry. */ 474 /* -------------------------------------------------------------------------- */ 475 #define CFG_E_RESOURCENOTAVAIL (CFG_EBASE + 0x02) 476 477 /* -------------------------------------------------------------------------- */ 478 /* Unable to find board name key in registry. */ 479 /* -------------------------------------------------------------------------- */ 480 #define CFG_E_INVALIDBOARDNAME (CFG_EBASE + 0x03) 481 482 /* -------------------------------------------------------------------------- */ 483 /* Unable to find a device node in registry with given unit number. */ 484 /* -------------------------------------------------------------------------- */ 485 #define CFG_E_INVALIDUNITNUM (CFG_EBASE + 0x04) 486 487 /* -------------------------------------------------------------------------- */ 488 /* Insufficient buffer size */ 489 /* -------------------------------------------------------------------------- */ 490 #define CFG_E_INSUFFICIENTBUFSIZE (CFG_EBASE + 0x05) 491 492 /* ========================================================================== */ 493 /* FAILURE Codes : BRD */ 494 /* ========================================================================== */ 495 #define BRD_EBASE (DSP_COMP_EBASE + 0x300) 496 497 /* -------------------------------------------------------------------------- */ 498 /* Board client does not have sufficient access rights for this operation. */ 499 /* -------------------------------------------------------------------------- */ 500 #define BRD_E_ACCESSDENIED (BRD_EBASE + 0x00) 501 502 /* -------------------------------------------------------------------------- */ 503 /* Unable to find trace buffer symbols in the DSP executable COFF file. */ 504 /* -------------------------------------------------------------------------- */ 505 #define BRD_E_NOTRACEBUFFER (BRD_EBASE + 0x01) 506 507 /* -------------------------------------------------------------------------- */ 508 /* Attempted to auto-start board, but no default DSP executable configured. */ 509 /* -------------------------------------------------------------------------- */ 510 #define BRD_E_NOEXEC (BRD_EBASE + 0x02) 511 512 /* -------------------------------------------------------------------------- */ 513 /* The operation failed because it was started from a wrong state */ 514 /* -------------------------------------------------------------------------- */ 515 #define BRD_E_WRONGSTATE (BRD_EBASE + 0x03) 516 517 /* ========================================================================== */ 518 /* FAILURE Codes : COD */ 519 /* ========================================================================== */ 520 #define COD_EBASE (DSP_COMP_EBASE + 0x400) 521 522 /* -------------------------------------------------------------------------- */ 523 /* No symbol table is loaded for this board. */ 524 /* -------------------------------------------------------------------------- */ 525 #define COD_E_NOSYMBOLSLOADED (COD_EBASE + 0x00) 526 527 /* -------------------------------------------------------------------------- */ 528 /* Symbol not found in for this board. */ 529 /* -------------------------------------------------------------------------- */ 530 #define COD_E_SYMBOLNOTFOUND (COD_EBASE + 0x01) 531 532 /* -------------------------------------------------------------------------- */ 533 /* ZL DLL module is not exporting the correct function interface. */ 534 /* -------------------------------------------------------------------------- */ 535 #define COD_E_NOZLFUNCTIONS (COD_EBASE + 0x02) 536 537 /* -------------------------------------------------------------------------- */ 538 /* Unable to initialize the ZL COFF parsing module. */ 539 /* -------------------------------------------------------------------------- */ 540 #define COD_E_ZLCREATEFAILED (COD_EBASE + 0x03) 541 542 /* -------------------------------------------------------------------------- */ 543 /* Unable to open DSP executable COFF file. */ 544 /* -------------------------------------------------------------------------- */ 545 #define COD_E_OPENFAILED (COD_EBASE + 0x04) 546 547 /* -------------------------------------------------------------------------- */ 548 /* Unable to parse DSP executable COFF file. */ 549 /* -------------------------------------------------------------------------- */ 550 #define COD_E_LOADFAILED (COD_EBASE + 0x05) 551 552 /* -------------------------------------------------------------------------- */ 553 /* Unable to read DSP executable COFF file. */ 554 /* -------------------------------------------------------------------------- */ 555 #define COD_E_READFAILED (COD_EBASE + 0x06) 556 557 /* ========================================================================== */ 558 /* FAILURE Codes : CHNL */ 559 /* ========================================================================== */ 560 #define CHNL_EBASE (DSP_COMP_EBASE + 0x500) 561 562 /* -------------------------------------------------------------------------- */ 563 /* Attempt to created channel manager with too many channels. */ 564 /* -------------------------------------------------------------------------- */ 565 #define CHNL_E_MAXCHANNELS (CHNL_EBASE + 0x00) 566 567 /* -------------------------------------------------------------------------- */ 568 /* No channel manager exists for this mini-driver. */ 569 /* -------------------------------------------------------------------------- */ 570 #define CHNL_E_NOMGR (CHNL_EBASE + 0x01) 571 572 /* -------------------------------------------------------------------------- */ 573 /* No free channels are available. */ 574 /* -------------------------------------------------------------------------- */ 575 #define CHNL_E_OUTOFSTREAMS (CHNL_EBASE + 0x02) 576 577 /* -------------------------------------------------------------------------- */ 578 /* Channel ID is out of range. */ 579 /* -------------------------------------------------------------------------- */ 580 #define CHNL_E_BADCHANID (CHNL_EBASE + 0x03) 581 582 /* -------------------------------------------------------------------------- */ 583 /* Channel is already in use. */ 584 /* -------------------------------------------------------------------------- */ 585 #define CHNL_E_CHANBUSY (CHNL_EBASE + 0x04) 586 587 /* -------------------------------------------------------------------------- */ 588 /* Invalid channel mode argument. */ 589 /* -------------------------------------------------------------------------- */ 590 #define CHNL_E_BADMODE (CHNL_EBASE + 0x05) 591 592 /* -------------------------------------------------------------------------- */ 593 /* dwTimeOut parameter was CHNL_IOCNOWAIT, yet no I/O completions were */ 594 /* queued. */ 595 /* -------------------------------------------------------------------------- */ 596 #define CHNL_E_NOIOC (CHNL_EBASE + 0x06) 597 598 /* -------------------------------------------------------------------------- */ 599 /* I/O has been cancelled on this channel. */ 600 /* -------------------------------------------------------------------------- */ 601 #define CHNL_E_CANCELLED (CHNL_EBASE + 0x07) 602 603 /* -------------------------------------------------------------------------- */ 604 /* End of stream was already requested on this output channel. */ 605 /* -------------------------------------------------------------------------- */ 606 #define CHNL_E_EOS (CHNL_EBASE + 0x09) 607 608 /* -------------------------------------------------------------------------- */ 609 /* Unable to create the channel event object. */ 610 /* -------------------------------------------------------------------------- */ 611 #define CHNL_E_CREATEEVENT (CHNL_EBASE + 0x0A) 612 613 /* -------------------------------------------------------------------------- */ 614 /* Board name and unit number do not identify a valid board name. */ 615 /* -------------------------------------------------------------------------- */ 616 #define CHNL_E_BRDID (CHNL_EBASE + 0x0B) 617 618 /* -------------------------------------------------------------------------- */ 619 /* Invalid IRQ configured for this WMD for this system. */ 620 /* -------------------------------------------------------------------------- */ 621 #define CHNL_E_INVALIDIRQ (CHNL_EBASE + 0x0C) 622 623 /* -------------------------------------------------------------------------- */ 624 /* DSP word size of zero configured for this device. */ 625 /* -------------------------------------------------------------------------- */ 626 #define CHNL_E_INVALIDWORDSIZE (CHNL_EBASE + 0x0D) 627 628 /* -------------------------------------------------------------------------- */ 629 /* A zero length memory base was specified for a shared memory class driver. */ 630 /* -------------------------------------------------------------------------- */ 631 #define CHNL_E_INVALIDMEMBASE (CHNL_EBASE + 0x0E) 632 633 /* -------------------------------------------------------------------------- */ 634 /* Memory map is not configured, or unable to map physical to linear */ 635 /* address. */ 636 /* -------------------------------------------------------------------------- */ 637 #define CHNL_E_NOMEMMAP (CHNL_EBASE + 0x0F) 638 639 /* -------------------------------------------------------------------------- */ 640 /* Attempted to create a channel manager when one already exists. */ 641 /* -------------------------------------------------------------------------- */ 642 #define CHNL_E_MGREXISTS (CHNL_EBASE + 0x10) 643 644 /* -------------------------------------------------------------------------- */ 645 /* Unable to plug channel ISR for configured IRQ. */ 646 /* -------------------------------------------------------------------------- */ 647 #define CHNL_E_ISR (CHNL_EBASE + 0x11) 648 649 /* -------------------------------------------------------------------------- */ 650 /* No free I/O request packets are available. */ 651 /* -------------------------------------------------------------------------- */ 652 #define CHNL_E_NOIORPS (CHNL_EBASE + 0x12) 653 654 /* -------------------------------------------------------------------------- */ 655 /* Buffer size is larger than the size of physical channel. */ 656 /* -------------------------------------------------------------------------- */ 657 #define CHNL_E_BUFSIZE (CHNL_EBASE + 0x13) 658 659 /* -------------------------------------------------------------------------- */ 660 /* User cannot mark end of stream on an input channel. */ 661 /* -------------------------------------------------------------------------- */ 662 #define CHNL_E_NOEOS (CHNL_EBASE + 0x14) 663 664 /* -------------------------------------------------------------------------- */ 665 /* Wait for flush operation on an output channel timed out. */ 666 /* -------------------------------------------------------------------------- */ 667 #define CHNL_E_WAITTIMEOUT (CHNL_EBASE + 0x15) 668 669 /* -------------------------------------------------------------------------- */ 670 /* User supplied hEvent must be specified with pstrEventName attribute */ 671 /* -------------------------------------------------------------------------- */ 672 #define CHNL_E_BADUSEREVENT (CHNL_EBASE + 0x16) 673 674 /* -------------------------------------------------------------------------- */ 675 /* Illegal user event name specified */ 676 /* -------------------------------------------------------------------------- */ 677 #define CHNL_E_USEREVENTNAME (CHNL_EBASE + 0x17) 678 679 /* -------------------------------------------------------------------------- */ 680 /* Unable to prepare buffer specified */ 681 /* -------------------------------------------------------------------------- */ 682 #define CHNL_E_PREPFAILED (CHNL_EBASE + 0x18) 683 684 /* -------------------------------------------------------------------------- */ 685 /* Unable to Unprepare buffer specified */ 686 /* -------------------------------------------------------------------------- */ 687 #define CHNL_E_UNPREPFAILED (CHNL_EBASE + 0x19) 688 689 /* ========================================================================== */ 690 /* FAILURE Codes : SYNC */ 691 /* ========================================================================== */ 692 #define SYNC_EBASE (DSP_COMP_EBASE + 0x600) 693 694 /* -------------------------------------------------------------------------- */ 695 /* Wait on a kernel event failed. */ 696 /* -------------------------------------------------------------------------- */ 697 #define SYNC_E_FAIL (SYNC_EBASE + 0x00) 698 699 /* -------------------------------------------------------------------------- */ 700 /* Timeout expired while waiting for event to be signalled. */ 701 /* -------------------------------------------------------------------------- */ 702 #define SYNC_E_TIMEOUT (SYNC_EBASE + 0x01) 703 704 /* ========================================================================== */ 705 /* FAILURE Codes : WMD */ 706 /* ========================================================================== */ 707 #define WMD_EBASE (DSP_COMP_EBASE + 0x700) 708 709 /* -------------------------------------------------------------------------- */ 710 /* A test of hardware assumptions or integrity failed. */ 711 /* -------------------------------------------------------------------------- */ 712 #define WMD_E_HARDWARE (WMD_EBASE + 0x00) 713 714 /* -------------------------------------------------------------------------- */ 715 /* One or more configuration parameters violated WMD hardware assumptions. */ 716 /* -------------------------------------------------------------------------- */ 717 #define WMD_E_BADCONFIG (WMD_EBASE + 0x01) 718 719 /* -------------------------------------------------------------------------- */ 720 /* Timeout occurred waiting for a response from the hardware. */ 721 /* -------------------------------------------------------------------------- */ 722 #define WMD_E_TIMEOUT (WMD_EBASE + 0x02) 723 724 /* ========================================================================== */ 725 /* FAILURE Codes : REG */ 726 /* ========================================================================== */ 727 #define REG_EBASE (DSP_COMP_EBASE + 0x800) 728 729 /* -------------------------------------------------------------------------- */ 730 /* Invalid subkey parameter. */ 731 /* -------------------------------------------------------------------------- */ 732 #define REG_E_INVALIDSUBKEY (REG_EBASE + 0x00) 733 734 /* -------------------------------------------------------------------------- */ 735 /* Invalid entry parameter. */ 736 /* -------------------------------------------------------------------------- */ 737 #define REG_E_INVALIDENTRY (REG_EBASE + 0x01) 738 739 /* -------------------------------------------------------------------------- */ 740 /* No more registry values. */ 741 /* -------------------------------------------------------------------------- */ 742 #define REG_E_NOMOREITEMS (REG_EBASE + 0x02) 743 744 /* -------------------------------------------------------------------------- */ 745 /* Insufficient space to hold data in registry value. */ 746 /* -------------------------------------------------------------------------- */ 747 #define REG_E_MOREDATA (REG_EBASE + 0x03) 748 749 /* ========================================================================== */ 750 /* FAILURE Codes : KFILE */ 751 /* ========================================================================== */ 752 #define KFILE_EBASE (DSP_COMP_EBASE + 0x900) 753 754 /* -------------------------------------------------------------------------- */ 755 /* Invalid file handle. */ 756 /* -------------------------------------------------------------------------- */ 757 #define E_KFILE_INVALIDHANDLE (KFILE_EBASE + 0x01) 758 759 /* -------------------------------------------------------------------------- */ 760 /* Bad file name. */ 761 /* -------------------------------------------------------------------------- */ 762 #define E_KFILE_BADFILENAME (KFILE_EBASE + 0x02) 763 764 /* -------------------------------------------------------------------------- */ 765 /* Invalid file mode. */ 766 /* -------------------------------------------------------------------------- */ 767 #define E_KFILE_INVALIDMODE (KFILE_EBASE + 0x03) 768 769 /* -------------------------------------------------------------------------- */ 770 /* No resources available. */ 771 /* -------------------------------------------------------------------------- */ 772 #define E_KFILE_NORESOURCES (KFILE_EBASE + 0x04) 773 774 /* -------------------------------------------------------------------------- */ 775 /* Invalid file buffer . */ 776 /* -------------------------------------------------------------------------- */ 777 #define E_KFILE_INVALIDBUFFER (KFILE_EBASE + 0x05) 778 779 /* -------------------------------------------------------------------------- */ 780 /* Bad origin argument. */ 781 /* -------------------------------------------------------------------------- */ 782 #define E_KFILE_BADORIGINFLAG (KFILE_EBASE + 0x06) 783 784 /* -------------------------------------------------------------------------- */ 785 /* Invalid file offset value. */ 786 /* -------------------------------------------------------------------------- */ 787 #define E_KFILE_INVALIDOFFSET (KFILE_EBASE + 0x07) 788 789 /* -------------------------------------------------------------------------- */ 790 /* General KFILE error condition */ 791 /* -------------------------------------------------------------------------- */ 792 #define E_KFILE_ERROR (KFILE_EBASE + 0x08) 793 794 #ifdef __cplusplus 795 } 796 #endif 797 #endif /* ERRBASE_ */ 798