1ASHIELD Board, v2.2
23/25/2011
3
4Route board out on 0-mil perimeter in top silk.
5
6Standard .062" FR4, 1oz Cu, RoHS, HASL
7
8Board is 2 layers, plus unusual silk screen (see notes below)
9
10!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
11NOTE: VENDOR MARK AND TEST STAMP SHOULD BE PLACED WITHIN JOY1 RECTANGLE.
12      MARK AND STAMP MUST NOT BE VISIBLE ONCE BOARD IS ASSEMBLED.
13!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
14
15Other Notes:
16
17Board is WHITE SMOBC
18
19ashield_blk.plc         BLACK primary (first applied) silk, component side
20                        This is a base silk.  Colored silks go on top of this one.
21
22ashield_blk.pls         BLACK silk for bottom (solder) side of board
23
24ashield.drl             Drill rack
25ashield.drd             Excellon drill file
26
27ashield.cmp             Component side copper
28ashield.stc             Component side stop mask
29
30ashield.sol             Solder side copper
31ashield.sts             Solder side stop mask
32
33All components on TOP side of board, EXCEPT for 6 single-row in-line headers
34on left and right edges.  There is 1 6-pin header and 5 8-pin headers.  These
35mount from the bottom, and are soldered from the top.
36
37Through-hole leads should be trimmed flush.
38
39