1 /** @file
2   HOB related definitions in PI.
3 
4 Copyright (c) 2006 - 2015, Intel Corporation. All rights reserved.<BR>
5 This program and the accompanying materials are licensed and made available under
6 the terms and conditions of the BSD License that accompanies this distribution.
7 The full text of the license may be found at
8 http://opensource.org/licenses/bsd-license.php.
9 
10 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
11 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
12 
13   @par Revision Reference:
14   PI Version 1.4
15 
16 **/
17 
18 #ifndef __PI_HOB_H__
19 #define __PI_HOB_H__
20 
21 //
22 // HobType of EFI_HOB_GENERIC_HEADER.
23 //
24 #define EFI_HOB_TYPE_HANDOFF              0x0001
25 #define EFI_HOB_TYPE_MEMORY_ALLOCATION    0x0002
26 #define EFI_HOB_TYPE_RESOURCE_DESCRIPTOR  0x0003
27 #define EFI_HOB_TYPE_GUID_EXTENSION       0x0004
28 #define EFI_HOB_TYPE_FV                   0x0005
29 #define EFI_HOB_TYPE_CPU                  0x0006
30 #define EFI_HOB_TYPE_MEMORY_POOL          0x0007
31 #define EFI_HOB_TYPE_FV2                  0x0009
32 #define EFI_HOB_TYPE_LOAD_PEIM_UNUSED     0x000A
33 #define EFI_HOB_TYPE_UEFI_CAPSULE         0x000B
34 #define EFI_HOB_TYPE_UNUSED               0xFFFE
35 #define EFI_HOB_TYPE_END_OF_HOB_LIST      0xFFFF
36 
37 ///
38 /// Describes the format and size of the data inside the HOB.
39 /// All HOBs must contain this generic HOB header.
40 ///
41 typedef struct {
42   ///
43   /// Identifies the HOB data structure type.
44   ///
45   UINT16    HobType;
46   ///
47   /// The length in bytes of the HOB.
48   ///
49   UINT16    HobLength;
50   ///
51   /// This field must always be set to zero.
52   ///
53   UINT32    Reserved;
54 } EFI_HOB_GENERIC_HEADER;
55 
56 
57 ///
58 /// Value of version  in EFI_HOB_HANDOFF_INFO_TABLE.
59 ///
60 #define EFI_HOB_HANDOFF_TABLE_VERSION 0x0009
61 
62 ///
63 /// Contains general state information used by the HOB producer phase.
64 /// This HOB must be the first one in the HOB list.
65 ///
66 typedef struct {
67   ///
68   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_HANDOFF.
69   ///
70   EFI_HOB_GENERIC_HEADER  Header;
71   ///
72   /// The version number pertaining to the PHIT HOB definition.
73   /// This value is four bytes in length to provide an 8-byte aligned entry
74   /// when it is combined with the 4-byte BootMode.
75   ///
76   UINT32                  Version;
77   ///
78   /// The system boot mode as determined during the HOB producer phase.
79   ///
80   EFI_BOOT_MODE           BootMode;
81   ///
82   /// The highest address location of memory that is allocated for use by the HOB producer
83   /// phase. This address must be 4-KB aligned to meet page restrictions of UEFI.
84   ///
85   EFI_PHYSICAL_ADDRESS    EfiMemoryTop;
86   ///
87   /// The lowest address location of memory that is allocated for use by the HOB producer phase.
88   ///
89   EFI_PHYSICAL_ADDRESS    EfiMemoryBottom;
90   ///
91   /// The highest address location of free memory that is currently available
92   /// for use by the HOB producer phase.
93   ///
94   EFI_PHYSICAL_ADDRESS    EfiFreeMemoryTop;
95   ///
96   /// The lowest address location of free memory that is available for use by the HOB producer phase.
97   ///
98   EFI_PHYSICAL_ADDRESS    EfiFreeMemoryBottom;
99   ///
100   /// The end of the HOB list.
101   ///
102   EFI_PHYSICAL_ADDRESS    EfiEndOfHobList;
103 } EFI_HOB_HANDOFF_INFO_TABLE;
104 
105 ///
106 /// EFI_HOB_MEMORY_ALLOCATION_HEADER describes the
107 /// various attributes of the logical memory allocation. The type field will be used for
108 /// subsequent inclusion in the UEFI memory map.
109 ///
110 typedef struct {
111   ///
112   /// A GUID that defines the memory allocation region's type and purpose, as well as
113   /// other fields within the memory allocation HOB. This GUID is used to define the
114   /// additional data within the HOB that may be present for the memory allocation HOB.
115   /// Type EFI_GUID is defined in InstallProtocolInterface() in the UEFI 2.0
116   /// specification.
117   ///
118   EFI_GUID              Name;
119 
120   ///
121   /// The base address of memory allocated by this HOB. Type
122   /// EFI_PHYSICAL_ADDRESS is defined in AllocatePages() in the UEFI 2.0
123   /// specification.
124   ///
125   EFI_PHYSICAL_ADDRESS  MemoryBaseAddress;
126 
127   ///
128   /// The length in bytes of memory allocated by this HOB.
129   ///
130   UINT64                MemoryLength;
131 
132   ///
133   /// Defines the type of memory allocated by this HOB. The memory type definition
134   /// follows the EFI_MEMORY_TYPE definition. Type EFI_MEMORY_TYPE is defined
135   /// in AllocatePages() in the UEFI 2.0 specification.
136   ///
137   EFI_MEMORY_TYPE       MemoryType;
138 
139   ///
140   /// Padding for Itanium processor family
141   ///
142   UINT8                 Reserved[4];
143 } EFI_HOB_MEMORY_ALLOCATION_HEADER;
144 
145 ///
146 /// Describes all memory ranges used during the HOB producer
147 /// phase that exist outside the HOB list. This HOB type
148 /// describes how memory is used, not the physical attributes of memory.
149 ///
150 typedef struct {
151   ///
152   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_MEMORY_ALLOCATION.
153   ///
154   EFI_HOB_GENERIC_HEADER            Header;
155   ///
156   /// An instance of the EFI_HOB_MEMORY_ALLOCATION_HEADER that describes the
157   /// various attributes of the logical memory allocation.
158   ///
159   EFI_HOB_MEMORY_ALLOCATION_HEADER  AllocDescriptor;
160   //
161   // Additional data pertaining to the "Name" Guid memory
162   // may go here.
163   //
164 } EFI_HOB_MEMORY_ALLOCATION;
165 
166 
167 ///
168 /// Describes the memory stack that is produced by the HOB producer
169 /// phase and upon which all post-memory-installed executable
170 /// content in the HOB producer phase is executing.
171 ///
172 typedef struct {
173   ///
174   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_MEMORY_ALLOCATION.
175   ///
176   EFI_HOB_GENERIC_HEADER            Header;
177   ///
178   /// An instance of the EFI_HOB_MEMORY_ALLOCATION_HEADER that describes the
179   /// various attributes of the logical memory allocation.
180   ///
181   EFI_HOB_MEMORY_ALLOCATION_HEADER  AllocDescriptor;
182 } EFI_HOB_MEMORY_ALLOCATION_STACK;
183 
184 ///
185 /// Defines the location of the boot-strap
186 /// processor (BSP) BSPStore ("Backing Store Pointer Store").
187 /// This HOB is valid for the Itanium processor family only
188 /// register overflow store.
189 ///
190 typedef struct {
191   ///
192   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_MEMORY_ALLOCATION.
193   ///
194   EFI_HOB_GENERIC_HEADER            Header;
195   ///
196   /// An instance of the EFI_HOB_MEMORY_ALLOCATION_HEADER that describes the
197   /// various attributes of the logical memory allocation.
198   ///
199   EFI_HOB_MEMORY_ALLOCATION_HEADER  AllocDescriptor;
200 } EFI_HOB_MEMORY_ALLOCATION_BSP_STORE;
201 
202 ///
203 /// Defines the location and entry point of the HOB consumer phase.
204 ///
205 typedef struct {
206   ///
207   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_MEMORY_ALLOCATION.
208   ///
209   EFI_HOB_GENERIC_HEADER            Header;
210   ///
211   /// An instance of the EFI_HOB_MEMORY_ALLOCATION_HEADER that describes the
212   /// various attributes of the logical memory allocation.
213   ///
214   EFI_HOB_MEMORY_ALLOCATION_HEADER  MemoryAllocationHeader;
215   ///
216   /// The GUID specifying the values of the firmware file system name
217   /// that contains the HOB consumer phase component.
218   ///
219   EFI_GUID                          ModuleName;
220   ///
221   /// The address of the memory-mapped firmware volume
222   /// that contains the HOB consumer phase firmware file.
223   ///
224   EFI_PHYSICAL_ADDRESS              EntryPoint;
225 } EFI_HOB_MEMORY_ALLOCATION_MODULE;
226 
227 ///
228 /// The resource type.
229 ///
230 typedef UINT32 EFI_RESOURCE_TYPE;
231 
232 //
233 // Value of ResourceType in EFI_HOB_RESOURCE_DESCRIPTOR.
234 //
235 #define EFI_RESOURCE_SYSTEM_MEMORY          0x00000000
236 #define EFI_RESOURCE_MEMORY_MAPPED_IO       0x00000001
237 #define EFI_RESOURCE_IO                     0x00000002
238 #define EFI_RESOURCE_FIRMWARE_DEVICE        0x00000003
239 #define EFI_RESOURCE_MEMORY_MAPPED_IO_PORT  0x00000004
240 #define EFI_RESOURCE_MEMORY_RESERVED        0x00000005
241 #define EFI_RESOURCE_IO_RESERVED            0x00000006
242 #define EFI_RESOURCE_MAX_MEMORY_TYPE        0x00000007
243 
244 ///
245 /// A type of recount attribute type.
246 ///
247 typedef UINT32 EFI_RESOURCE_ATTRIBUTE_TYPE;
248 
249 //
250 // These types can be ORed together as needed.
251 //
252 // The following attributes are used to describe settings
253 //
254 #define EFI_RESOURCE_ATTRIBUTE_PRESENT                  0x00000001
255 #define EFI_RESOURCE_ATTRIBUTE_INITIALIZED              0x00000002
256 #define EFI_RESOURCE_ATTRIBUTE_TESTED                   0x00000004
257 #define EFI_RESOURCE_ATTRIBUTE_READ_PROTECTED           0x00000080
258 //
259 // This is typically used as memory cacheability attribute today.
260 // NOTE: Since PI spec 1.4, please use EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTED
261 // as Physical write protected attribute, and EFI_RESOURCE_ATTRIBUTE_WRITE_PROTECTED
262 // means Memory cacheability attribute: The memory supports being programmed with
263 // a writeprotected cacheable attribute.
264 //
265 #define EFI_RESOURCE_ATTRIBUTE_WRITE_PROTECTED          0x00000100
266 #define EFI_RESOURCE_ATTRIBUTE_EXECUTION_PROTECTED      0x00000200
267 #define EFI_RESOURCE_ATTRIBUTE_PERSISTENT               0x00800000
268 //
269 // The rest of the attributes are used to describe capabilities
270 //
271 #define EFI_RESOURCE_ATTRIBUTE_SINGLE_BIT_ECC           0x00000008
272 #define EFI_RESOURCE_ATTRIBUTE_MULTIPLE_BIT_ECC         0x00000010
273 #define EFI_RESOURCE_ATTRIBUTE_ECC_RESERVED_1           0x00000020
274 #define EFI_RESOURCE_ATTRIBUTE_ECC_RESERVED_2           0x00000040
275 #define EFI_RESOURCE_ATTRIBUTE_UNCACHEABLE              0x00000400
276 #define EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE        0x00000800
277 #define EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE  0x00001000
278 #define EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE     0x00002000
279 #define EFI_RESOURCE_ATTRIBUTE_16_BIT_IO                0x00004000
280 #define EFI_RESOURCE_ATTRIBUTE_32_BIT_IO                0x00008000
281 #define EFI_RESOURCE_ATTRIBUTE_64_BIT_IO                0x00010000
282 #define EFI_RESOURCE_ATTRIBUTE_UNCACHED_EXPORTED        0x00020000
283 #define EFI_RESOURCE_ATTRIBUTE_READ_PROTECTABLE         0x00100000
284 //
285 // This is typically used as memory cacheability attribute today.
286 // NOTE: Since PI spec 1.4, please use EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTABLE
287 // as Memory capability attribute: The memory supports being protected from processor
288 // writes, and EFI_RESOURCE_ATTRIBUTE_WRITE_PROTEC TABLE means Memory cacheability attribute:
289 // The memory supports being programmed with a writeprotected cacheable attribute.
290 //
291 #define EFI_RESOURCE_ATTRIBUTE_WRITE_PROTECTABLE        0x00200000
292 #define EFI_RESOURCE_ATTRIBUTE_EXECUTION_PROTECTABLE    0x00400000
293 #define EFI_RESOURCE_ATTRIBUTE_PERSISTABLE              0x01000000
294 
295 #define EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTED      0x00040000
296 #define EFI_RESOURCE_ATTRIBUTE_READ_ONLY_PROTECTABLE    0x00800000
297 
298 //
299 // Physical memory relative reliability attribute. This
300 // memory provides higher reliability relative to other
301 // memory in the system. If all memory has the same
302 // reliability, then this bit is not used.
303 //
304 #define EFI_RESOURCE_ATTRIBUTE_MORE_RELIABLE            0x02000000
305 
306 ///
307 /// Describes the resource properties of all fixed,
308 /// nonrelocatable resource ranges found on the processor
309 /// host bus during the HOB producer phase.
310 ///
311 typedef struct {
312   ///
313   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_RESOURCE_DESCRIPTOR.
314   ///
315   EFI_HOB_GENERIC_HEADER      Header;
316   ///
317   /// A GUID representing the owner of the resource. This GUID is used by HOB
318   /// consumer phase components to correlate device ownership of a resource.
319   ///
320   EFI_GUID                    Owner;
321   ///
322   /// The resource type enumeration as defined by EFI_RESOURCE_TYPE.
323   ///
324   EFI_RESOURCE_TYPE           ResourceType;
325   ///
326   /// Resource attributes as defined by EFI_RESOURCE_ATTRIBUTE_TYPE.
327   ///
328   EFI_RESOURCE_ATTRIBUTE_TYPE ResourceAttribute;
329   ///
330   /// The physical start address of the resource region.
331   ///
332   EFI_PHYSICAL_ADDRESS        PhysicalStart;
333   ///
334   /// The number of bytes of the resource region.
335   ///
336   UINT64                      ResourceLength;
337 } EFI_HOB_RESOURCE_DESCRIPTOR;
338 
339 ///
340 /// Allows writers of executable content in the HOB producer phase to
341 /// maintain and manage HOBs with specific GUID.
342 ///
343 typedef struct {
344   ///
345   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_GUID_EXTENSION.
346   ///
347   EFI_HOB_GENERIC_HEADER      Header;
348   ///
349   /// A GUID that defines the contents of this HOB.
350   ///
351   EFI_GUID                    Name;
352   //
353   // Guid specific data goes here
354   //
355 } EFI_HOB_GUID_TYPE;
356 
357 ///
358 /// Details the location of firmware volumes that contain firmware files.
359 ///
360 typedef struct {
361   ///
362   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_FV.
363   ///
364   EFI_HOB_GENERIC_HEADER Header;
365   ///
366   /// The physical memory-mapped base address of the firmware volume.
367   ///
368   EFI_PHYSICAL_ADDRESS   BaseAddress;
369   ///
370   /// The length in bytes of the firmware volume.
371   ///
372   UINT64                 Length;
373 } EFI_HOB_FIRMWARE_VOLUME;
374 
375 ///
376 /// Details the location of a firmware volume that was extracted
377 /// from a file within another firmware volume.
378 ///
379 typedef struct {
380   ///
381   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_FV2.
382   ///
383   EFI_HOB_GENERIC_HEADER  Header;
384   ///
385   /// The physical memory-mapped base address of the firmware volume.
386   ///
387   EFI_PHYSICAL_ADDRESS    BaseAddress;
388   ///
389   /// The length in bytes of the firmware volume.
390   ///
391   UINT64                  Length;
392   ///
393   /// The name of the firmware volume.
394   ///
395   EFI_GUID                FvName;
396   ///
397   /// The name of the firmware file that contained this firmware volume.
398   ///
399   EFI_GUID                FileName;
400 } EFI_HOB_FIRMWARE_VOLUME2;
401 
402 
403 ///
404 /// Describes processor information, such as address space and I/O space capabilities.
405 ///
406 typedef struct {
407   ///
408   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_CPU.
409   ///
410   EFI_HOB_GENERIC_HEADER  Header;
411   ///
412   /// Identifies the maximum physical memory addressability of the processor.
413   ///
414   UINT8                   SizeOfMemorySpace;
415   ///
416   /// Identifies the maximum physical I/O addressability of the processor.
417   ///
418   UINT8                   SizeOfIoSpace;
419   ///
420   /// This field will always be set to zero.
421   ///
422   UINT8                   Reserved[6];
423 } EFI_HOB_CPU;
424 
425 
426 ///
427 /// Describes pool memory allocations.
428 ///
429 typedef struct {
430   ///
431   /// The HOB generic header. Header.HobType = EFI_HOB_TYPE_MEMORY_POOL.
432   ///
433   EFI_HOB_GENERIC_HEADER  Header;
434 } EFI_HOB_MEMORY_POOL;
435 
436 ///
437 /// Each UEFI capsule HOB details the location of a UEFI capsule. It includes a base address and length
438 /// which is based upon memory blocks with a EFI_CAPSULE_HEADER and the associated
439 /// CapsuleImageSize-based payloads. These HOB's shall be created by the PEI PI firmware
440 /// sometime after the UEFI UpdateCapsule service invocation with the
441 /// CAPSULE_FLAGS_POPULATE_SYSTEM_TABLE flag set in the EFI_CAPSULE_HEADER.
442 ///
443 typedef struct {
444   ///
445   /// The HOB generic header where Header.HobType = EFI_HOB_TYPE_UEFI_CAPSULE.
446   ///
447   EFI_HOB_GENERIC_HEADER Header;
448 
449   ///
450   /// The physical memory-mapped base address of an UEFI capsule. This value is set to
451   /// point to the base of the contiguous memory of the UEFI capsule.
452   /// The length of the contiguous memory in bytes.
453   ///
454   EFI_PHYSICAL_ADDRESS   BaseAddress;
455   UINT64                 Length;
456 } EFI_HOB_UEFI_CAPSULE;
457 
458 ///
459 /// Union of all the possible HOB Types.
460 ///
461 typedef union {
462   EFI_HOB_GENERIC_HEADER              *Header;
463   EFI_HOB_HANDOFF_INFO_TABLE          *HandoffInformationTable;
464   EFI_HOB_MEMORY_ALLOCATION           *MemoryAllocation;
465   EFI_HOB_MEMORY_ALLOCATION_BSP_STORE *MemoryAllocationBspStore;
466   EFI_HOB_MEMORY_ALLOCATION_STACK     *MemoryAllocationStack;
467   EFI_HOB_MEMORY_ALLOCATION_MODULE    *MemoryAllocationModule;
468   EFI_HOB_RESOURCE_DESCRIPTOR         *ResourceDescriptor;
469   EFI_HOB_GUID_TYPE                   *Guid;
470   EFI_HOB_FIRMWARE_VOLUME             *FirmwareVolume;
471   EFI_HOB_FIRMWARE_VOLUME2            *FirmwareVolume2;
472   EFI_HOB_CPU                         *Cpu;
473   EFI_HOB_MEMORY_POOL                 *Pool;
474   EFI_HOB_UEFI_CAPSULE                *Capsule;
475   UINT8                               *Raw;
476 } EFI_PEI_HOB_POINTERS;
477 
478 
479 #endif
480