1 /* 2 * Copyright (C) 2016 The Android Open Source Project 3 * 4 * Licensed under the Apache License, Version 2.0 (the "License"); 5 * you may not use this file except in compliance with the License. 6 * You may obtain a copy of the License at 7 * 8 * http://www.apache.org/licenses/LICENSE-2.0 9 * 10 * Unless required by applicable law or agreed to in writing, software 11 * distributed under the License is distributed on an "AS IS" BASIS, 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 13 * See the License for the specific language governing permissions and 14 * limitations under the License. 15 */ 16 17 #include "Thumbnail.h" 18 19 #define LOG_NDEBUG 0 20 #define LOG_TAG "EmulatedCamera_Thumbnail" 21 #include <cutils/log.h> 22 #include <libexif/exif-data.h> 23 #include <libyuv.h> 24 25 #include "JpegCompressor.h" 26 27 #include <vector> 28 29 /* 30 * The NV21 format is a YUV format with an 8-bit Y-component and the U and V 31 * components are stored as 8 bits each but they are shared between a block of 32 * 2x2 pixels. So when calculating bits per pixel the 16 bits of U and V are 33 * shared between 4 pixels leading to 4 bits of U and V per pixel. Together 34 * with the 8 bits of Y this gives us 12 bits per pixel.. 35 * 36 * The components are not grouped by pixels but separated into one Y-plane and 37 * one interleaved U and V-plane. The first half of the byte sequence is all of 38 * the Y data laid out in a linear fashion. After that the interleaved U and V- 39 * plane starts with one byte of V followed by one byte of U followed by one 40 * byte of V and so on. Each byte of U or V is associated with a 2x2 pixel block 41 * in a linear fashion. 42 * 43 * For an 8 by 4 pixel image the layout would be: 44 * 45 * +-----+-----+-----+-----+-----+-----+-----+-----+ 46 * | Y0 | Y1 | Y2 | Y3 | Y4 | Y5 | Y6 | Y7 | 47 * +-----+-----+-----+-----+-----+-----+-----+-----+ 48 * | Y8 | Y9 | Y10 | Y11 | Y12 | Y13 | Y14 | Y15 | 49 * +-----+-----+-----+-----+-----+-----+-----+-----+ 50 * | Y16 | Y17 | Y18 | Y19 | Y20 | Y21 | Y22 | Y23 | 51 * +-----+-----+-----+-----+-----+-----+-----+-----+ 52 * | Y24 | Y25 | Y26 | Y27 | Y28 | Y29 | Y30 | Y31 | 53 * +-----+-----+-----+-----+-----+-----+-----+-----+ 54 * | V0 | U0 | V1 | U1 | V2 | U2 | V3 | U3 | 55 * +-----+-----+-----+-----+-----+-----+-----+-----+ 56 * | V4 | U4 | V5 | U5 | V6 | U6 | V7 | U7 | 57 * +-----+-----+-----+-----+-----+-----+-----+-----+ 58 * 59 * In this image V0 and U0 are the V and U components for the 2x2 block of 60 * pixels whose Y components are Y0, Y1, Y8 and Y9. V1 and U1 are matched with 61 * the Y components Y2, Y3, Y10, Y11, and so on for that row. For the next row 62 * of V and U the V4 and U4 components would be paired with Y16, Y17, Y24 and 63 * Y25. 64 */ 65 66 namespace android { 67 68 static bool createRawThumbnail(const unsigned char* sourceImage, 69 int sourceWidth, int sourceHeight, 70 int thumbnailWidth, int thumbnailHeight, 71 std::vector<unsigned char>* thumbnail) { 72 // Deinterleave the U and V planes into separate planes, this is because 73 // libyuv requires the planes to be separate when scaling 74 const size_t sourceUVPlaneSize = (sourceWidth * sourceHeight) / 4; 75 // Put both U and V planes in one buffer, one after the other, to reduce 76 // memory fragmentation and number of allocations 77 std::vector<unsigned char> sourcePlanes(sourceUVPlaneSize * 2); 78 const unsigned char* ySourcePlane = sourceImage; 79 unsigned char* uSourcePlane = &sourcePlanes[0]; 80 unsigned char* vSourcePlane = &sourcePlanes[sourceUVPlaneSize]; 81 82 for (size_t i = 0; i < sourceUVPlaneSize; ++i) { 83 vSourcePlane[i] = sourceImage[sourceWidth * sourceHeight + i * 2 + 0]; 84 uSourcePlane[i] = sourceImage[sourceWidth * sourceHeight + i * 2 + 1]; 85 } 86 87 // Create enough space in the output vector for the result 88 thumbnail->resize((thumbnailWidth * thumbnailHeight * 12) / 8); 89 90 // The downscaled U and V planes will also be linear instead of interleaved, 91 // allocate space for them here 92 const size_t destUVPlaneSize = (thumbnailWidth * thumbnailHeight) / 4; 93 std::vector<unsigned char> destPlanes(destUVPlaneSize * 2); 94 unsigned char* yDestPlane = &(*thumbnail)[0]; 95 unsigned char* uDestPlane = &destPlanes[0]; 96 unsigned char* vDestPlane = &destPlanes[destUVPlaneSize]; 97 98 // The strides for the U and V planes are half the width because the U and V 99 // components are common to 2x2 pixel blocks 100 int result = libyuv::I420Scale(ySourcePlane, sourceWidth, 101 uSourcePlane, sourceWidth / 2, 102 vSourcePlane, sourceWidth / 2, 103 sourceWidth, sourceHeight, 104 yDestPlane, thumbnailWidth, 105 uDestPlane, thumbnailWidth / 2, 106 vDestPlane, thumbnailWidth / 2, 107 thumbnailWidth, thumbnailHeight, 108 libyuv::kFilterBilinear); 109 if (result != 0) { 110 ALOGE("Unable to create thumbnail, downscaling failed with error: %d", 111 result); 112 return false; 113 } 114 115 // Now we need to interleave the downscaled U and V planes into the 116 // output buffer to make it NV21 encoded 117 const size_t uvPlanesOffset = thumbnailWidth * thumbnailHeight; 118 for (size_t i = 0; i < destUVPlaneSize; ++i) { 119 (*thumbnail)[uvPlanesOffset + i * 2 + 0] = vDestPlane[i]; 120 (*thumbnail)[uvPlanesOffset + i * 2 + 1] = uDestPlane[i]; 121 } 122 123 return true; 124 } 125 126 bool createThumbnail(const unsigned char* sourceImage, 127 int sourceWidth, int sourceHeight, 128 int thumbWidth, int thumbHeight, int quality, 129 ExifData* exifData) { 130 if (thumbWidth <= 0 || thumbHeight <= 0) { 131 ALOGE("%s: Invalid thumbnail width=%d or height=%d, must be > 0", 132 __FUNCTION__, thumbWidth, thumbHeight); 133 return false; 134 } 135 136 // First downscale the source image into a thumbnail-sized raw image 137 std::vector<unsigned char> rawThumbnail; 138 if (!createRawThumbnail(sourceImage, sourceWidth, sourceHeight, 139 thumbWidth, thumbHeight, &rawThumbnail)) { 140 // The thumbnail function will log an appropriate error if needed 141 return false; 142 } 143 144 // And then compress it into JPEG format without any EXIF data 145 NV21JpegCompressor compressor; 146 status_t result = compressor.compressRawImage(&rawThumbnail[0], 147 nullptr /* EXIF */, 148 quality, thumbWidth, thumbHeight); 149 if (result != NO_ERROR) { 150 ALOGE("%s: Unable to compress thumbnail", __FUNCTION__); 151 return false; 152 } 153 154 // And finally put it in the EXIF data. This transfers ownership of the 155 // malloc'd memory to the EXIF data structure. As long as the EXIF data 156 // structure is free'd using the EXIF library this memory will be free'd. 157 exifData->size = compressor.getCompressedSize(); 158 exifData->data = reinterpret_cast<unsigned char*>(malloc(exifData->size)); 159 if (exifData->data == nullptr) { 160 ALOGE("%s: Unable to allocate %u bytes of memory for thumbnail", 161 __FUNCTION__, exifData->size); 162 exifData->size = 0; 163 return false; 164 } 165 compressor.getCompressedImage(exifData->data); 166 return true; 167 } 168 169 } // namespace android 170 171