docs/xml/manual-writing-tools.xml

<?xml version="1.0"?> <!-- -*- sgml -*- -->
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
  "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
[ <!ENTITY % vg-entities SYSTEM "vg-entities.xml"> %vg-entities; ]>


<chapter id="manual-writing-tools" xreflabel="Writing a New Valgrind Tool">
<title>Writing a New Valgrind Tool</title>

So you want to write a Valgrind tool?  Here are some instructions that may
help.

<sect1 id="manual-writing-tools.intro" xreflabel="Introduction">
<title>Introduction</title>

<para>The key idea behind Valgrind's architecture is the division
between its <emphasis>core</emphasis> and <emphasis>tools</emphasis>.</para>

<para>The core provides the common low-level infrastructure to
support program instrumentation, including the JIT
compiler, low-level memory manager, signal handling and a
thread scheduler.  It also provides certain services that
are useful to some but not all tools, such as support for error
recording, and support for replacing heap allocation functions such as
<function>malloc</function>.</para>

<para>But the core leaves certain operations undefined, which
must be filled by tools.  Most notably, tools define how program
code should be instrumented.  They can also call certain
functions to indicate to the core that they would like to use
certain services, or be notified when certain interesting events
occur.  But the core takes care of all the hard work.</para>

</sect1>


<sect1 id="manual-writing-tools.writingatool" xreflabel="Basics">
<title>Basics</title>

<sect2 id="manual-writing-tools.howtoolswork" xreflabel="How tools work">
<title>How tools work</title>

<para>Tools must define various functions for instrumenting programs
that are called by Valgrind's core. They are then linked against
Valgrind's core to define a complete Valgrind tool which will be used
when the <option>--tool</option> option is used to select it.</para>

</sect2>


<sect2 id="manual-writing-tools.gettingcode" xreflabel="Getting the code">
<title>Getting the code</title>

<para>To write your own tool, you'll need the Valgrind source code.  You'll
need a check-out of the Subversion repository for the automake/autoconf
build instructions to work.  See the information about how to do check-out
from the repository at <ulink url="&vg-repo-url;">the Valgrind
website</ulink>.</para>

</sect2>


<sect2 id="manual-writing-tools.gettingstarted" xreflabel="Getting started">
<title>Getting started</title>

<para>Valgrind uses GNU <computeroutput>automake</computeroutput> and
<computeroutput>autoconf</computeroutput> for the creation of Makefiles
and configuration.  But don't worry, these instructions should be enough
to get you started even if you know nothing about those tools.</para>

<para>In what follows, all filenames are relative to Valgrind's
top-level directory <computeroutput>valgrind/</computeroutput>.</para>

<orderedlist>
 <listitem>
  <para>Choose a name for the tool, and a two-letter abbreviation that can
  be used as a short prefix.  We'll use
  <computeroutput>foobar</computeroutput> and
  <computeroutput>fb</computeroutput> as an example.</para>
 </listitem>

 <listitem>
  <para>Make three new directories <filename>foobar/</filename>,
  <filename>foobar/docs/</filename> and
  <filename>foobar/tests/</filename>.
  </para>
 </listitem>

 <listitem>
  <para>Create an empty file <filename>foobar/tests/Makefile.am</filename>.
  </para>
 </listitem>

 <listitem>
  <para>Copy <filename>none/Makefile.am</filename> into
  <filename>foobar/</filename>.  Edit it by replacing all
  occurrences of the strings
  <computeroutput>"none"</computeroutput>,
  <computeroutput>"nl_"</computeroutput> and
  <computeroutput>"nl-"</computeroutput> with
  <computeroutput>"foobar"</computeroutput>,
  <computeroutput>"fb_"</computeroutput> and
  <computeroutput>"fb-"</computeroutput> respectively.</para>
 </listitem>

 <listitem>
  <para>Copy <filename>none/nl_main.c</filename> into
  <computeroutput>foobar/</computeroutput>, renaming it as
  <filename>fb_main.c</filename>.  Edit it by changing the
  <computeroutput>details</computeroutput> lines in
  <function>nl_pre_clo_init</function> to something appropriate for the
  tool.  These fields are used in the startup message, except for
  <computeroutput>bug_reports_to</computeroutput> which is used if a
  tool assertion fails.  Also, replace the string
  <computeroutput>"nl_"</computeroutput> throughout with
  <computeroutput>"fb_"</computeroutput> again.</para>
 </listitem>

  <listitem>
   <para>Edit <filename>Makefile.am</filename>, adding the new directory
   <filename>foobar</filename> to the
   <computeroutput>TOOLS</computeroutput> or
   <computeroutput>EXP_TOOLS</computeroutput> variables.</para>
  </listitem>

  <listitem>
   <para>Edit <filename>configure.in</filename>, adding
   <filename>foobar/Makefile</filename> and
   <filename>foobar/tests/Makefile</filename> to the
   <computeroutput>AC_OUTPUT</computeroutput> list.</para>
  </listitem>

  <listitem>
   <para>Run:</para>
<programlisting><![CDATA[
  autogen.sh
  ./configure --prefix=`pwd`/inst
  make
  make install]]></programlisting>

   <para>It should automake, configure and compile without errors,
   putting copies of the tool in
   <filename>foobar/</filename> and
   <filename>inst/lib/valgrind/</filename>.</para>
  </listitem>

  <listitem>
   <para>You can test it with a command like:</para>
<programlisting><![CDATA[
  inst/bin/valgrind --tool=foobar date]]></programlisting>

   <para>(almost any program should work;
   <computeroutput>date</computeroutput> is just an example).
   The output should be something like this:</para>
<programlisting><![CDATA[
  ==738== foobar-0.0.1, a foobarring tool.
  ==738== Copyright (C) 2002-2017, and GNU GPL'd, by J. Programmer.
  ==738== Using Valgrind-3.13.0.SVN and LibVEX; rerun with -h for copyright info
  ==738== Command: date
  ==738==
  Tue Nov 27 12:40:49 EST 2007
  ==738==]]></programlisting>

   <para>The tool does nothing except run the program uninstrumented.</para>
  </listitem>

</orderedlist>

<para>These steps don't have to be followed exactly -- you can choose
different names for your source files, and use a different
<option>--prefix</option> for
<computeroutput>./configure</computeroutput>.</para>

<para>Now that we've setup, built and tested the simplest possible tool,
onto the interesting stuff...</para>

</sect2>


<sect2 id="manual-writing-tools.writingcode" xreflabel="Writing the Code">
<title>Writing the code</title>

<para>A tool must define at least these four functions:</para>
<programlisting><![CDATA[
  pre_clo_init()
  post_clo_init()
  instrument()
  fini()]]></programlisting>

<para>The names can be different to the above, but these are the usual
names.  The first one is registered using the macro
<computeroutput>VG_DETERMINE_INTERFACE_VERSION</computeroutput>.
The last three are registered using the
<computeroutput>VG_(basic_tool_funcs)</computeroutput> function.</para>

<para>In addition, if a tool wants to use some of the optional services
provided by the core, it may have to define other functions and tell the
core about them.</para>

</sect2>


<sect2 id="manual-writing-tools.init" xreflabel="Initialisation">
<title>Initialisation</title>

<para>Most of the initialisation should be done in
<function>pre_clo_init</function>.  Only use
<function>post_clo_init</function> if a tool provides command line
options and must do some initialisation after option processing takes
place (<computeroutput>"clo"</computeroutput> stands for "command line
options").</para>

<para>First of all, various "details" need to be set for a tool, using
the functions <function>VG_(details_*)</function>.  Some are all
compulsory, some aren't.  Some are used when constructing the startup
message, <computeroutput>detail_bug_reports_to</computeroutput> is used
if <computeroutput>VG_(tool_panic)</computeroutput> is ever called, or
a tool assertion fails.  Others have other uses.</para>

<para>Second, various "needs" can be set for a tool, using the functions
<function>VG_(needs_*)</function>.  They are mostly booleans, and can
be left untouched (they default to <varname>False</varname>).  They
determine whether a tool can do various things such as: record, report
and suppress errors; process command line options; wrap system calls;
record extra information about heap blocks; etc.</para>

<para>For example, if a tool wants the core's help in recording and
reporting errors, it must call
<function>VG_(needs_tool_errors)</function> and provide definitions of
eight functions for comparing errors, printing out errors, reading
suppressions from a suppressions file, etc.  While writing these
functions requires some work, it's much less than doing error handling
from scratch because the core is doing most of the work.
</para>

<para>Third, the tool can indicate which events in core it wants to be
notified about, using the functions <function>VG_(track_*)</function>.
These include things such as heap blocks being allocated, the stack
pointer changing, a mutex being locked, etc.  If a tool wants to know
about this, it should provide a pointer to a function, which will be
called when that event happens.</para>

<para>For example, if the tool want to be notified when a new heap block
is allocated, it should call
<function>VG_(track_new_mem_heap)</function> with an appropriate
function pointer, and the assigned function will be called each time
this happens.</para>

<para>More information about "details", "needs" and "trackable events"
can be found in
<filename>include/pub_tool_tooliface.h</filename>.</para>

</sect2>


<sect2 id="manual-writing-tools.instr" xreflabel="Instrumentation">
<title>Instrumentation</title>

<para><function>instrument</function> is the interesting one.  It
allows you to instrument <emphasis>VEX IR</emphasis>, which is
Valgrind's RISC-like intermediate language.  VEX IR is described
in the comments of the header file
<filename>VEX/pub/libvex_ir.h</filename>.</para>

<para>The easiest way to instrument VEX IR is to insert calls to C
functions when interesting things happen.  See the tool "Lackey"
(<filename>lackey/lk_main.c</filename>) for a simple example of this, or
Cachegrind (<filename>cachegrind/cg_main.c</filename>) for a more
complex example.</para>

</sect2>


<sect2 id="manual-writing-tools.fini" xreflabel="Finalisation">
<title>Finalisation</title>

<para>This is where you can present the final results, such as a summary
of the information collected.  Any log files should be written out at
this point.</para>

</sect2>


<sect2 id="manual-writing-tools.otherinfo" xreflabel="Other Important Information">
<title>Other Important Information</title>

<para>Please note that the core/tool split infrastructure is quite
complex and not brilliantly documented.  Here are some important points,
but there are undoubtedly many others that I should note but haven't
thought of.</para>

<para>The files <filename>include/pub_tool_*.h</filename> contain all the
types, macros, functions, etc. that a tool should (hopefully) need, and are
the only <filename>.h</filename> files a tool should need to
<computeroutput>#include</computeroutput>.  They have a reasonable amount of
documentation in it that should hopefully be enough to get you going.</para>

<para>Note that you can't use anything from the C library (there
are deep reasons for this, trust us).  Valgrind provides an
implementation of a reasonable subset of the C library, details of which
are in <filename>pub_tool_libc*.h</filename>.</para>

<para>When writing a tool, in theory you shouldn't need to look at any of
the code in Valgrind's core, but in practice it might be useful sometimes to
help understand something.</para>

<para>The <filename>include/pub_tool_basics.h</filename> and
<filename>VEX/pub/libvex_basictypes.h</filename> files have some basic
types that are widely used.</para>

<para>Ultimately, the tools distributed (Memcheck, Cachegrind, Lackey, etc.)
are probably the best documentation of all, for the moment.</para>

<para>The <computeroutput>VG_</computeroutput> macro is used
heavily.  This just prepends a longer string in front of names to avoid
potential namespace clashes.  It is defined in
<filename>include/pub_tool_basics.h</filename>.</para>

<para>There are some assorted notes about various aspects of the
implementation in <filename>docs/internals/</filename>.  Much of it
isn't that relevant to tool-writers, however.</para>

</sect2>


</sect1>


<sect1 id="manual-writing-tools.advtopics" xreflabel="Advanced Topics">
<title>Advanced Topics</title>

<para>Once a tool becomes more complicated, there are some extra
things you may want/need to do.</para>

<sect2 id="manual-writing-tools.advice" xreflabel="Debugging Tips">
<title>Debugging Tips</title>

<para>Writing and debugging tools is not trivial.  Here are some
suggestions for solving common problems.</para>

<para>If you are getting segmentation faults in C functions used by your
tool, the usual GDB command:</para>

<screen><![CDATA[
  gdb <prog> core]]></screen>
<para>usually gives the location of the segmentation fault.</para>

<para>If you want to debug C functions used by your tool, there are
instructions on how to do so in the file
<filename>README_DEVELOPERS</filename>.</para>

<para>If you are having problems with your VEX IR instrumentation, it's
likely that GDB won't be able to help at all.  In this case, Valgrind's
<option>--trace-flags</option> option is invaluable for observing the
results of instrumentation.</para>

<para>If you just want to know whether a program point has been reached,
using the <computeroutput>OINK</computeroutput> macro (in
<filename>include/pub_tool_libcprint.h</filename>) can be easier than
using GDB.</para>

<para>The other debugging command line options can be useful too (run
<computeroutput>valgrind --help-debug</computeroutput> for the
list).</para>

</sect2>

<sect2 id="manual-writing-tools.suppressions" xreflabel="Suppressions">
<title>Suppressions</title>

<para>If your tool reports errors and you want to suppress some common
ones, you can add suppressions to the suppression files.  The relevant
files are <filename>*.supp</filename>; the final suppression
file is aggregated from these files by combining the relevant
<filename>.supp</filename> files depending on the versions of linux, X
and glibc on a system.</para>

<para>Suppression types have the form
<computeroutput>tool_name:suppression_name</computeroutput>.  The
<computeroutput>tool_name</computeroutput> here is the name you specify
for the tool during initialisation with
<function>VG_(details_name)</function>.</para>

</sect2>


<sect2 id="manual-writing-tools.docs" xreflabel="Documentation">
<title>Documentation</title>

<para>If you are feeling conscientious and want to write some
documentation for your tool, please use XML as the rest of Valgrind does.
The file <filename>docs/README</filename> has more details on getting
the XML toolchain to work;  this can be difficult, unfortunately.</para>

<para>To write the documentation, follow these steps (using
<computeroutput>foobar</computeroutput> as the example tool name
again):</para>

<orderedlist>

  <listitem>
   <para>The docs go in
   <computeroutput>foobar/docs/</computeroutput>, which you will
   have created when you started writing the tool.</para>
  </listitem>

  <listitem>
    <para>Copy the XML documentation file for the tool Nulgrind from
    <filename>none/docs/nl-manual.xml</filename> to
    <computeroutput>foobar/docs/</computeroutput>, and rename it to
    <filename>foobar/docs/fb-manual.xml</filename>.</para>

    <para><command>Note</command>: there is a tetex bug
    involving underscores in filenames, so don't use '_'.</para>
  </listitem>

  <listitem>
    <para>Write the documentation. There are some helpful bits and
    pieces on using XML markup in
    <filename>docs/xml/xml_help.txt</filename>.</para>
  </listitem>

  <listitem>
    <para>Include it in the User Manual by adding the relevant entry to
    <filename>docs/xml/manual.xml</filename>.  Copy and edit an
    existing entry.</para>
  </listitem>

  <listitem>
    <para>Include it in the man page by adding the relevant entry to
    <filename>docs/xml/valgrind-manpage.xml</filename>.  Copy and
    edit an existing entry.</para>
  </listitem>

  <listitem>
    <para>Validate <filename>foobar/docs/fb-manual.xml</filename> using
    the following command from within <filename>docs/</filename>:
  </para>
<screen><![CDATA[
make valid
]]></screen>

   <para>You may get errors that look like this:</para>

<screen><![CDATA[
./xml/index.xml:5: element chapter: validity error : No declaration for
attribute base of element chapter
]]></screen>

   <para>Ignore (only) these -- they're not important.</para>

   <para>Because the XML toolchain is fragile, it is important to ensure
   that <filename>fb-manual.xml</filename> won't break the documentation
   set build.  Note that just because an XML file happily transforms to
   html does not necessarily mean the same holds true for pdf/ps.</para>
  </listitem>

  <listitem>
    <para>You can (re-)generate the HTML docs while you are writing
    <filename>fb-manual.xml</filename> to help you see how it's looking.
    The generated files end up in
    <filename>docs/html/</filename>.  Use the following
    command, within <filename>docs/</filename>:</para>
<screen><![CDATA[
make html-docs
]]></screen>
  </listitem>

  <listitem>
    <para>When you have finished, try to generate PDF and PostScript output to
    check all is well, from within <filename>docs/</filename>:
  </para>
<screen><![CDATA[
make print-docs
]]></screen>

    <para>Check the output <filename>.pdf</filename> and
    <filename>.ps</filename> files in
    <computeroutput>docs/print/</computeroutput>.</para>

    <para>Note that the toolchain is even more fragile for the print docs,
    so don't feel too bad if you can't get it working.</para>
  </listitem>

</orderedlist>

</sect2>


<sect2 id="manual-writing-tools.regtests" xreflabel="Regression Tests">
<title>Regression Tests</title>

<para>Valgrind has some support for regression tests.  If you want to
write regression tests for your tool:</para>

<orderedlist>
  <listitem>
    <para>The tests go in <computeroutput>foobar/tests/</computeroutput>,
    which you will have created when you started writing the tool.</para>
  </listitem>

  <listitem>
    <para>Write <filename>foobar/tests/Makefile.am</filename>.  Use
    <filename>memcheck/tests/Makefile.am</filename> as an
    example.</para>
  </listitem>

  <listitem>
    <para>Write the tests, <computeroutput>.vgtest</computeroutput> test
    description files, <computeroutput>.stdout.exp</computeroutput> and
    <computeroutput>.stderr.exp</computeroutput> expected output files.
    (Note that Valgrind's output goes to stderr.)  Some details on
    writing and running tests are given in the comments at the top of
    the testing script
    <computeroutput>tests/vg_regtest</computeroutput>.</para>
  </listitem>

  <listitem>
    <para>Write a filter for stderr results
    <computeroutput>foobar/tests/filter_stderr</computeroutput>.  It can
    call the existing filters in
    <computeroutput>tests/</computeroutput>.  See
    <computeroutput>memcheck/tests/filter_stderr</computeroutput> for an
    example; in particular note the
    <computeroutput>$dir</computeroutput> trick that ensures the filter
    works correctly from any directory.</para>
  </listitem>

</orderedlist>

</sect2>


<sect2 id="manual-writing-tools.profiling" xreflabel="Profiling">
<title>Profiling</title>

<para>Lots of profiling tools have trouble running Valgrind.  For example,
trying to use gprof is hopeless.</para>

<para>Probably the best way to profile a tool is with OProfile on Linux.</para>

<para>You can also use Cachegrind on it.  Read
<filename>README_DEVELOPERS</filename> for details on running Valgrind under
Valgrind;  it's a bit fragile but can usually be made to work.</para>

</sect2>


<sect2 id="manual-writing-tools.mkhackery" xreflabel="Other Makefile Hackery">
<title>Other Makefile Hackery</title>

<para>If you add any directories under
<computeroutput>foobar/</computeroutput>, you will need to add
an appropriate <filename>Makefile.am</filename> to it, and add a
corresponding entry to the <computeroutput>AC_OUTPUT</computeroutput>
list in <filename>configure.in</filename>.</para>

<para>If you add any scripts to your tool (see Cachegrind for an
example) you need to add them to the
<computeroutput>bin_SCRIPTS</computeroutput> variable in
<filename>foobar/Makefile.am</filename> and possible also to the
<computeroutput>AC_OUTPUT</computeroutput> list in
<filename>configure.in</filename>.</para>

</sect2>


<sect2 id="manual-writing-tools.ifacever" xreflabel="Core/tool Interface Versions">
<title>The Core/tool Interface</title>

<para>The core/tool interface evolves over time, but it's pretty stable.
We deliberately do not provide backward compatibility with old interfaces,
because it is too difficult and too restrictive.  We view this as a good
thing -- if we had to be backward compatible with earlier versions, many
improvements now in the system could not have been added.</para>

<para>Because tools are statically linked with the core, if a tool compiles
successfully then it should be compatible with the core.  We would not
deliberately violate this property by, for example, changing the behaviour
of a core function without changing its prototype.</para>

</sect2>

</sect1>


<sect1 id="manual-writing-tools.finalwords" xreflabel="Final Words">
<title>Final Words</title>

<para>Writing a new Valgrind tool is not easy, but the tools you can write
with Valgrind are among the most powerful programming tools there are.
Happy programming!</para>

</sect1>

</chapter>