1 #ifndef __LINUX_NL80211_H 2 #define __LINUX_NL80211_H 3 /* 4 * 802.11 netlink interface public header 5 * 6 * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> 7 * Copyright 2008 Michael Wu <flamingice@sourmilk.net> 8 * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> 9 * Copyright 2008 Michael Buesch <m@bues.ch> 10 * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> 11 * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> 12 * Copyright 2008 Colin McCabe <colin@cozybit.com> 13 * Copyright 2015-2017 Intel Deutschland GmbH 14 * 15 * Permission to use, copy, modify, and/or distribute this software for any 16 * purpose with or without fee is hereby granted, provided that the above 17 * copyright notice and this permission notice appear in all copies. 18 * 19 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 20 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 21 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 22 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 23 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 24 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 25 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 26 * 27 */ 28 29 /* 30 * This header file defines the userspace API to the wireless stack. Please 31 * be careful not to break things - i.e. don't move anything around or so 32 * unless you can demonstrate that it breaks neither API nor ABI. 33 * 34 * Additions to the API should be accompanied by actual implementations in 35 * an upstream driver, so that example implementations exist in case there 36 * are ever concerns about the precise semantics of the API or changes are 37 * needed, and to ensure that code for dead (no longer implemented) API 38 * can actually be identified and removed. 39 * Nonetheless, semantics should also be documented carefully in this file. 40 */ 41 42 #include <linux/types.h> 43 44 #define NL80211_GENL_NAME "nl80211" 45 46 #define NL80211_MULTICAST_GROUP_CONFIG "config" 47 #define NL80211_MULTICAST_GROUP_SCAN "scan" 48 #define NL80211_MULTICAST_GROUP_REG "regulatory" 49 #define NL80211_MULTICAST_GROUP_MLME "mlme" 50 #define NL80211_MULTICAST_GROUP_VENDOR "vendor" 51 #define NL80211_MULTICAST_GROUP_NAN "nan" 52 #define NL80211_MULTICAST_GROUP_TESTMODE "testmode" 53 54 /** 55 * DOC: Station handling 56 * 57 * Stations are added per interface, but a special case exists with VLAN 58 * interfaces. When a station is bound to an AP interface, it may be moved 59 * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). 60 * The station is still assumed to belong to the AP interface it was added 61 * to. 62 * 63 * Station handling varies per interface type and depending on the driver's 64 * capabilities. 65 * 66 * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS 67 * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: 68 * - a setup station entry is added, not yet authorized, without any rate 69 * or capability information, this just exists to avoid race conditions 70 * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid 71 * to add rate and capability information to the station and at the same 72 * time mark it authorized. 73 * - %NL80211_TDLS_ENABLE_LINK is then used 74 * - after this, the only valid operation is to remove it by tearing down 75 * the TDLS link (%NL80211_TDLS_DISABLE_LINK) 76 * 77 * TODO: need more info for other interface types 78 */ 79 80 /** 81 * DOC: Frame transmission/registration support 82 * 83 * Frame transmission and registration support exists to allow userspace 84 * management entities such as wpa_supplicant react to management frames 85 * that are not being handled by the kernel. This includes, for example, 86 * certain classes of action frames that cannot be handled in the kernel 87 * for various reasons. 88 * 89 * Frame registration is done on a per-interface basis and registrations 90 * cannot be removed other than by closing the socket. It is possible to 91 * specify a registration filter to register, for example, only for a 92 * certain type of action frame. In particular with action frames, those 93 * that userspace registers for will not be returned as unhandled by the 94 * driver, so that the registered application has to take responsibility 95 * for doing that. 96 * 97 * The type of frame that can be registered for is also dependent on the 98 * driver and interface type. The frame types are advertised in wiphy 99 * attributes so applications know what to expect. 100 * 101 * NOTE: When an interface changes type while registrations are active, 102 * these registrations are ignored until the interface type is 103 * changed again. This means that changing the interface type can 104 * lead to a situation that couldn't otherwise be produced, but 105 * any such registrations will be dormant in the sense that they 106 * will not be serviced, i.e. they will not receive any frames. 107 * 108 * Frame transmission allows userspace to send for example the required 109 * responses to action frames. It is subject to some sanity checking, 110 * but many frames can be transmitted. When a frame was transmitted, its 111 * status is indicated to the sending socket. 112 * 113 * For more technical details, see the corresponding command descriptions 114 * below. 115 */ 116 117 /** 118 * DOC: Virtual interface / concurrency capabilities 119 * 120 * Some devices are able to operate with virtual MACs, they can have 121 * more than one virtual interface. The capability handling for this 122 * is a bit complex though, as there may be a number of restrictions 123 * on the types of concurrency that are supported. 124 * 125 * To start with, each device supports the interface types listed in 126 * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the 127 * types there no concurrency is implied. 128 * 129 * Once concurrency is desired, more attributes must be observed: 130 * To start with, since some interface types are purely managed in 131 * software, like the AP-VLAN type in mac80211 for example, there's 132 * an additional list of these, they can be added at any time and 133 * are only restricted by some semantic restrictions (e.g. AP-VLAN 134 * cannot be added without a corresponding AP interface). This list 135 * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. 136 * 137 * Further, the list of supported combinations is exported. This is 138 * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, 139 * it exports a list of "groups", and at any point in time the 140 * interfaces that are currently active must fall into any one of 141 * the advertised groups. Within each group, there are restrictions 142 * on the number of interfaces of different types that are supported 143 * and also the number of different channels, along with potentially 144 * some other restrictions. See &enum nl80211_if_combination_attrs. 145 * 146 * All together, these attributes define the concurrency of virtual 147 * interfaces that a given device supports. 148 */ 149 150 /** 151 * DOC: packet coalesce support 152 * 153 * In most cases, host that receives IPv4 and IPv6 multicast/broadcast 154 * packets does not do anything with these packets. Therefore the 155 * reception of these unwanted packets causes unnecessary processing 156 * and power consumption. 157 * 158 * Packet coalesce feature helps to reduce number of received interrupts 159 * to host by buffering these packets in firmware/hardware for some 160 * predefined time. Received interrupt will be generated when one of the 161 * following events occur. 162 * a) Expiration of hardware timer whose expiration time is set to maximum 163 * coalescing delay of matching coalesce rule. 164 * b) Coalescing buffer in hardware reaches it's limit. 165 * c) Packet doesn't match any of the configured coalesce rules. 166 * 167 * User needs to configure following parameters for creating a coalesce 168 * rule. 169 * a) Maximum coalescing delay 170 * b) List of packet patterns which needs to be matched 171 * c) Condition for coalescence. pattern 'match' or 'no match' 172 * Multiple such rules can be created. 173 */ 174 175 /** 176 * DOC: FILS shared key authentication offload 177 * 178 * FILS shared key authentication offload can be advertized by drivers by 179 * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support 180 * FILS shared key authentication offload should be able to construct the 181 * authentication and association frames for FILS shared key authentication and 182 * eventually do a key derivation as per IEEE 802.11ai. The below additional 183 * parameters should be given to driver in %NL80211_CMD_CONNECT. 184 * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai 185 * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai 186 * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message 187 * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK 188 * rIK should be used to generate an authentication tag on the ERP message and 189 * rMSK should be used to derive a PMKSA. 190 * rIK, rMSK should be generated and keyname_nai, sequence number should be used 191 * as specified in IETF RFC 6696. 192 * 193 * When FILS shared key authentication is completed, driver needs to provide the 194 * below additional parameters to userspace. 195 * %NL80211_ATTR_FILS_KEK - used for key renewal 196 * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges 197 * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated 198 * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace 199 * The PMKSA can be maintained in userspace persistently so that it can be used 200 * later after reboots or wifi turn off/on also. 201 * 202 * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS 203 * capable AP supporting PMK caching. It specifies the scope within which the 204 * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and 205 * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based 206 * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with 207 * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to 208 * use in a FILS shared key connection with PMKSA caching. 209 */ 210 211 /** 212 * enum nl80211_commands - supported nl80211 commands 213 * 214 * @NL80211_CMD_UNSPEC: unspecified command to catch errors 215 * 216 * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request 217 * to get a list of all present wiphys. 218 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or 219 * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, 220 * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the 221 * attributes determining the channel width; this is used for setting 222 * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, 223 * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, 224 * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. 225 * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL 226 * instead, the support here is for backward compatibility only. 227 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request 228 * or rename notification. Has attributes %NL80211_ATTR_WIPHY and 229 * %NL80211_ATTR_WIPHY_NAME. 230 * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes 231 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. 232 * 233 * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; 234 * either a dump request for all interfaces or a specific get with a 235 * single %NL80211_ATTR_IFINDEX is supported. 236 * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires 237 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. 238 * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response 239 * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, 240 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also 241 * be sent from userspace to request creation of a new virtual interface, 242 * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and 243 * %NL80211_ATTR_IFNAME. 244 * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes 245 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from 246 * userspace to request deletion of a virtual interface, then requires 247 * attribute %NL80211_ATTR_IFINDEX. 248 * 249 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified 250 * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. 251 * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, 252 * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. 253 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, 254 * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, 255 * and %NL80211_ATTR_KEY_SEQ attributes. 256 * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX 257 * or %NL80211_ATTR_MAC. 258 * 259 * @NL80211_CMD_GET_BEACON: (not used) 260 * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface 261 * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL 262 * attributes. For drivers that generate the beacon and probe responses 263 * internally, the following attributes must be provided: %NL80211_ATTR_IE, 264 * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. 265 * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters 266 * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that 267 * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, 268 * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, 269 * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, 270 * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, 271 * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, 272 * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, 273 * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. 274 * The channel to use can be set on the interface or be given using the 275 * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. 276 * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP 277 * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface 278 * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP 279 * 280 * @NL80211_CMD_GET_STATION: Get station attributes for station identified by 281 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. 282 * @NL80211_CMD_SET_STATION: Set station attributes for station identified by 283 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. 284 * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the 285 * the interface identified by %NL80211_ATTR_IFINDEX. 286 * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC 287 * or, if no MAC address given, all stations, on the interface identified 288 * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and 289 * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type 290 * of disconnection indication should be sent to the station 291 * (Deauthentication or Disassociation frame and reason code for that 292 * frame). 293 * 294 * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to 295 * destination %NL80211_ATTR_MAC on the interface identified by 296 * %NL80211_ATTR_IFINDEX. 297 * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to 298 * destination %NL80211_ATTR_MAC on the interface identified by 299 * %NL80211_ATTR_IFINDEX. 300 * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by 301 * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. 302 * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by 303 * %NL80211_ATTR_MAC. 304 * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the 305 * the interface identified by %NL80211_ATTR_IFINDEX. 306 * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC 307 * or, if no MAC address given, all mesh paths, on the interface identified 308 * by %NL80211_ATTR_IFINDEX. 309 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by 310 * %NL80211_ATTR_IFINDEX. 311 * 312 * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set 313 * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device 314 * has a private regulatory domain, it will be returned. Otherwise, the 315 * global regdomain will be returned. 316 * A device will have a private regulatory domain if it uses the 317 * regulatory_hint() API. Even when a private regdomain is used the channel 318 * information will still be mended according to further hints from 319 * the regulatory core to help with compliance. A dump version of this API 320 * is now available which will returns the global regdomain as well as 321 * all private regdomains of present wiphys (for those that have it). 322 * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then 323 * its private regdomain is the only valid one for it. The regulatory 324 * core is not used to help with compliance in this case. 325 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command 326 * after being queried by the kernel. CRDA replies by sending a regulatory 327 * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our 328 * current alpha2 if it found a match. It also provides 329 * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each 330 * regulatory rule is a nested set of attributes given by 331 * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and 332 * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by 333 * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and 334 * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. 335 * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain 336 * to the specified ISO/IEC 3166-1 alpha2 country code. The core will 337 * store this as a valid request and then query userspace for it. 338 * 339 * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the 340 * interface identified by %NL80211_ATTR_IFINDEX 341 * 342 * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the 343 * interface identified by %NL80211_ATTR_IFINDEX 344 * 345 * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The 346 * interface is identified with %NL80211_ATTR_IFINDEX and the management 347 * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be 348 * added to the end of the specified management frame is specified with 349 * %NL80211_ATTR_IE. If the command succeeds, the requested data will be 350 * added to all specified management frames generated by 351 * kernel/firmware/driver. 352 * Note: This command has been removed and it is only reserved at this 353 * point to avoid re-using existing command number. The functionality this 354 * command was planned for has been provided with cleaner design with the 355 * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, 356 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, 357 * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. 358 * 359 * @NL80211_CMD_GET_SCAN: get scan results 360 * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters 361 * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the 362 * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to 363 * specify a BSSID to scan for; if not included, the wildcard BSSID will 364 * be used. 365 * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to 366 * NL80211_CMD_GET_SCAN and on the "scan" multicast group) 367 * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, 368 * partial scan results may be available 369 * 370 * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain 371 * intervals and certain number of cycles, as specified by 372 * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is 373 * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, 374 * scheduled scan will run in an infinite loop with the specified interval. 375 * These attributes are mutually exculsive, 376 * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if 377 * NL80211_ATTR_SCHED_SCAN_PLANS is defined. 378 * If for some reason scheduled scan is aborted by the driver, all scan 379 * plans are canceled (including scan plans that did not start yet). 380 * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) 381 * are passed, they are used in the probe requests. For 382 * broadcast, a broadcast SSID must be passed (ie. an empty 383 * string). If no SSID is passed, no probe requests are sent and 384 * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, 385 * if passed, define which channels should be scanned; if not 386 * passed, all channels allowed for the current regulatory domain 387 * are used. Extra IEs can also be passed from the userspace by 388 * using the %NL80211_ATTR_IE attribute. The first cycle of the 389 * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY 390 * is supplied. 391 * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if 392 * scheduled scan is not running. The caller may assume that as soon 393 * as the call returns, it is safe to start a new scheduled scan again. 394 * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan 395 * results available. 396 * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has 397 * stopped. The driver may issue this event at any time during a 398 * scheduled scan. One reason for stopping the scan is if the hardware 399 * does not support starting an association or a normal scan while running 400 * a scheduled scan. This event is also sent when the 401 * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface 402 * is brought down while a scheduled scan was running. 403 * 404 * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation 405 * or noise level 406 * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to 407 * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) 408 * 409 * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC 410 * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK 411 * (PMK is used for PTKSA derivation in case of FILS shared key offload) or 412 * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, 413 * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS 414 * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier 415 * advertized by a FILS capable AP identifying the scope of PMKSA in an 416 * ESS. 417 * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC 418 * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, 419 * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS 420 * authentication. 421 * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. 422 * 423 * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain 424 * has been changed and provides details of the request information 425 * that caused the change such as who initiated the regulatory request 426 * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx 427 * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if 428 * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or 429 * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain 430 * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is 431 * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on 432 * to (%NL80211_ATTR_REG_ALPHA2). 433 * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon 434 * has been found while world roaming thus enabling active scan or 435 * any mode of operation that initiates TX (beacons) on a channel 436 * where we would not have been able to do either before. As an example 437 * if you are world roaming (regulatory domain set to world or if your 438 * driver is using a custom world roaming regulatory domain) and while 439 * doing a passive scan on the 5 GHz band you find an AP there (if not 440 * on a DFS channel) you will now be able to actively scan for that AP 441 * or use AP mode on your card on that same channel. Note that this will 442 * never be used for channels 1-11 on the 2 GHz band as they are always 443 * enabled world wide. This beacon hint is only sent if your device had 444 * either disabled active scanning or beaconing on a channel. We send to 445 * userspace the wiphy on which we removed a restriction from 446 * (%NL80211_ATTR_WIPHY) and the channel on which this occurred 447 * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) 448 * the beacon hint was processed. 449 * 450 * @NL80211_CMD_AUTHENTICATE: authentication request and notification. 451 * This command is used both as a command (request to authenticate) and 452 * as an event on the "mlme" multicast group indicating completion of the 453 * authentication process. 454 * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the 455 * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and 456 * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify 457 * the SSID (mainly for association, but is included in authentication 458 * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used 459 * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE 460 * is used to specify the authentication type. %NL80211_ATTR_IE is used to 461 * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) 462 * to be added to the frame. 463 * When used as an event, this reports reception of an Authentication 464 * frame in station and IBSS modes when the local MLME processed the 465 * frame, i.e., it was for the local STA and was received in correct 466 * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the 467 * MLME SAP interface (kernel providing MLME, userspace SME). The 468 * included %NL80211_ATTR_FRAME attribute contains the management frame 469 * (including both the header and frame body, but not FCS). This event is 470 * also used to indicate if the authentication attempt timed out. In that 471 * case the %NL80211_ATTR_FRAME attribute is replaced with a 472 * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which 473 * pending authentication timed out). 474 * @NL80211_CMD_ASSOCIATE: association request and notification; like 475 * NL80211_CMD_AUTHENTICATE but for Association and Reassociation 476 * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, 477 * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The 478 * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the 479 * request is for the initial association to an ESS (that attribute not 480 * included) or for reassociation within the ESS (that attribute is 481 * included). 482 * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like 483 * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to 484 * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication 485 * primitives). 486 * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like 487 * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to 488 * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). 489 * 490 * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael 491 * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the 492 * event includes %NL80211_ATTR_MAC to describe the source MAC address of 493 * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key 494 * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and 495 * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this 496 * event matches with MLME-MICHAELMICFAILURE.indication() primitive 497 * 498 * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a 499 * FREQ attribute (for the initial frequency if no peer can be found) 500 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those 501 * should be fixed rather than automatically determined. Can only be 502 * executed on a network interface that is UP, and fixed BSSID/FREQ 503 * may be rejected. Another optional parameter is the beacon interval, 504 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not 505 * given defaults to 100 TU (102.4ms). 506 * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is 507 * determined by the network interface. 508 * 509 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute 510 * to identify the device, and the TESTDATA blob attribute to pass through 511 * to the driver. 512 * 513 * @NL80211_CMD_CONNECT: connection request and notification; this command 514 * requests to connect to a specified network but without separating 515 * auth and assoc steps. For this, you need to specify the SSID in a 516 * %NL80211_ATTR_SSID attribute, and can optionally specify the association 517 * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, 518 * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, 519 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 520 * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, %NL80211_ATTR_MAC_HINT, and 521 * %NL80211_ATTR_WIPHY_FREQ_HINT. 522 * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are 523 * restrictions on BSS selection, i.e., they effectively prevent roaming 524 * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT 525 * can be included to provide a recommendation of the initial BSS while 526 * allowing the driver to roam to other BSSes within the ESS and also to 527 * ignore this recommendation if the indicated BSS is not ideal. Only one 528 * set of BSSID,frequency parameters is used (i.e., either the enforcing 529 * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict 530 * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). 531 * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within 532 * the ESS in case the device is already associated and an association with 533 * a different BSS is desired. 534 * Background scan period can optionally be 535 * specified in %NL80211_ATTR_BG_SCAN_PERIOD, 536 * if not specified default background scan configuration 537 * in driver is used and if period value is 0, bg scan will be disabled. 538 * This attribute is ignored if driver does not support roam scan. 539 * It is also sent as an event, with the BSSID and response IEs when the 540 * connection is established or failed to be established. This can be 541 * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success, 542 * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the 543 * event, the connection attempt failed due to not being able to initiate 544 * authentication/association or not receiving a response from the AP. 545 * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as 546 * well to remain backwards compatible. 547 * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), 548 * sent as an event when the card/driver roamed by itself. 549 * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify 550 * userspace that a connection was dropped by the AP or due to other 551 * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and 552 * %NL80211_ATTR_REASON_CODE attributes are used. 553 * 554 * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices 555 * associated with this wiphy must be down and will follow. 556 * 557 * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified 558 * channel for the specified amount of time. This can be used to do 559 * off-channel operations like transmit a Public Action frame and wait for 560 * a response while being associated to an AP on another channel. 561 * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus 562 * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the 563 * frequency for the operation. 564 * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds 565 * to remain on the channel. This command is also used as an event to 566 * notify when the requested duration starts (it may take a while for the 567 * driver to schedule this time due to other concurrent needs for the 568 * radio). 569 * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) 570 * that will be included with any events pertaining to this request; 571 * the cookie is also used to cancel the request. 572 * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a 573 * pending remain-on-channel duration if the desired operation has been 574 * completed prior to expiration of the originally requested duration. 575 * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the 576 * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to 577 * uniquely identify the request. 578 * This command is also used as an event to notify when a requested 579 * remain-on-channel duration has expired. 580 * 581 * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX 582 * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface 583 * and @NL80211_ATTR_TX_RATES the set of allowed rates. 584 * 585 * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames 586 * (via @NL80211_CMD_FRAME) for processing in userspace. This command 587 * requires an interface index, a frame type attribute (optional for 588 * backward compatibility reasons, if not given assumes action frames) 589 * and a match attribute containing the first few bytes of the frame 590 * that should match, e.g. a single byte for only a category match or 591 * four bytes for vendor frames including the OUI. The registration 592 * cannot be dropped, but is removed automatically when the netlink 593 * socket is closed. Multiple registrations can be made. 594 * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for 595 * backward compatibility 596 * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This 597 * command is used both as a request to transmit a management frame and 598 * as an event indicating reception of a frame that was not processed in 599 * kernel code, but is for us (i.e., which may need to be processed in a 600 * user space application). %NL80211_ATTR_FRAME is used to specify the 601 * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used 602 * to indicate on which channel the frame is to be transmitted or was 603 * received. If this channel is not the current channel (remain-on-channel 604 * or the operational channel) the device will switch to the given channel 605 * and transmit the frame, optionally waiting for a response for the time 606 * specified using %NL80211_ATTR_DURATION. When called, this operation 607 * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the 608 * TX status event pertaining to the TX request. 609 * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the 610 * management frames at CCK rate or not in 2GHz band. 611 * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA 612 * counters which will be updated to the current value. This attribute 613 * is used during CSA period. 614 * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this 615 * command may be used with the corresponding cookie to cancel the wait 616 * time if it is known that it is no longer necessary. 617 * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. 618 * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame 619 * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies 620 * the TX command and %NL80211_ATTR_FRAME includes the contents of the 621 * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged 622 * the frame. 623 * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for 624 * backward compatibility. 625 * 626 * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE 627 * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE 628 * 629 * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command 630 * is used to configure connection quality monitoring notification trigger 631 * levels. 632 * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This 633 * command is used as an event to indicate the that a trigger level was 634 * reached. 635 * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ 636 * and the attributes determining channel width) the given interface 637 * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. 638 * In case multiple channels are supported by the device, the mechanism 639 * with which it switches channels is implementation-defined. 640 * When a monitor interface is given, it can only switch channel while 641 * no other interfaces are operating to avoid disturbing the operation 642 * of any other interfaces, and other interfaces will again take 643 * precedence when they are used. 644 * 645 * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. 646 * 647 * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform 648 * multicast to unicast conversion. When enabled, all multicast packets 649 * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header) 650 * will be sent out to each station once with the destination (multicast) 651 * MAC address replaced by the station's MAC address. Note that this may 652 * break certain expectations of the receiver, e.g. the ability to drop 653 * unicast IP packets encapsulated in multicast L2 frames, or the ability 654 * to not send destination unreachable messages in such cases. 655 * This can only be toggled per BSS. Configure this on an interface of 656 * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces 657 * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode. 658 * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this 659 * command, the feature is disabled. 660 * 661 * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial 662 * mesh config parameters may be given. 663 * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the 664 * network is determined by the network interface. 665 * 666 * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame 667 * notification. This event is used to indicate that an unprotected 668 * deauthentication frame was dropped when MFP is in use. 669 * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame 670 * notification. This event is used to indicate that an unprotected 671 * disassociation frame was dropped when MFP is in use. 672 * 673 * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a 674 * beacon or probe response from a compatible mesh peer. This is only 675 * sent while no station information (sta_info) exists for the new peer 676 * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, 677 * @NL80211_MESH_SETUP_USERSPACE_AMPE, or 678 * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this 679 * notification, userspace may decide to create a new station 680 * (@NL80211_CMD_NEW_STATION). To stop this notification from 681 * reoccurring, the userspace authentication daemon may want to create the 682 * new station with the AUTHENTICATED flag unset and maybe change it later 683 * depending on the authentication result. 684 * 685 * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. 686 * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. 687 * Since wireless is more complex than wired ethernet, it supports 688 * various triggers. These triggers can be configured through this 689 * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For 690 * more background information, see 691 * http://wireless.kernel.org/en/users/Documentation/WoWLAN. 692 * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification 693 * from the driver reporting the wakeup reason. In this case, the 694 * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason 695 * for the wakeup, if it was caused by wireless. If it is not present 696 * in the wakeup notification, the wireless device didn't cause the 697 * wakeup but reports that it was woken up. 698 * 699 * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver 700 * the necessary information for supporting GTK rekey offload. This 701 * feature is typically used during WoWLAN. The configuration data 702 * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and 703 * contains the data in sub-attributes). After rekeying happened, 704 * this command may also be sent by the driver as an MLME event to 705 * inform userspace of the new replay counter. 706 * 707 * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace 708 * of PMKSA caching dandidates. 709 * 710 * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). 711 * In addition, this can be used as an event to request userspace to take 712 * actions on TDLS links (set up a new link or tear down an existing one). 713 * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested 714 * operation, %NL80211_ATTR_MAC contains the peer MAC address, and 715 * %NL80211_ATTR_REASON_CODE the reason code to be used (only with 716 * %NL80211_TDLS_TEARDOWN). 717 * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The 718 * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be 719 * sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as 720 * 802.11 management frames, while TDLS action codes (802.11-2012 721 * 8.5.13.1) will be encapsulated and sent as data frames. The currently 722 * supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES 723 * and the currently supported TDLS actions codes are given in 724 * &enum ieee80211_tdls_actioncode. 725 * 726 * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP 727 * (or GO) interface (i.e. hostapd) to ask for unexpected frames to 728 * implement sending deauth to stations that send unexpected class 3 729 * frames. Also used as the event sent by the kernel when such a frame 730 * is received. 731 * For the event, the %NL80211_ATTR_MAC attribute carries the TA and 732 * other attributes like the interface index are present. 733 * If used as the command it must have an interface index and you can 734 * only unsubscribe from the event by closing the socket. Subscription 735 * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. 736 * 737 * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the 738 * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame 739 * and wasn't already in a 4-addr VLAN. The event will be sent similarly 740 * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. 741 * 742 * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface 743 * by sending a null data frame to it and reporting when the frame is 744 * acknowleged. This is used to allow timing out inactive clients. Uses 745 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a 746 * direct reply with an %NL80211_ATTR_COOKIE that is later used to match 747 * up the event with the request. The event includes the same data and 748 * has %NL80211_ATTR_ACK set if the frame was ACKed. 749 * 750 * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from 751 * other BSSes when any interfaces are in AP mode. This helps implement 752 * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME 753 * messages. Note that per PHY only one application may register. 754 * 755 * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether 756 * No Acknowledgement Policy should be applied. 757 * 758 * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels 759 * independently of the userspace SME, send this event indicating 760 * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the 761 * attributes determining channel width. This indication may also be 762 * sent when a remotely-initiated switch (e.g., when a STA receives a CSA 763 * from the remote AP) is completed; 764 * 765 * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch 766 * has been started on an interface, regardless of the initiator 767 * (ie. whether it was requested from a remote device or 768 * initiated on our own). It indicates that 769 * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ 770 * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may 771 * decide to react to this indication by requesting other 772 * interfaces to change channel as well. 773 * 774 * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by 775 * its %NL80211_ATTR_WDEV identifier. It must have been created with 776 * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the 777 * P2P Device can be used for P2P operations, e.g. remain-on-channel and 778 * public action frame TX. 779 * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by 780 * its %NL80211_ATTR_WDEV identifier. 781 * 782 * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to 783 * notify userspace that AP has rejected the connection request from a 784 * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON 785 * is used for this. 786 * 787 * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames 788 * for IBSS or MESH vif. 789 * 790 * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. 791 * This is to be used with the drivers advertising the support of MAC 792 * address based access control. List of MAC addresses is passed in 793 * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in 794 * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it 795 * is not already done. The new list will replace any existing list. Driver 796 * will clear its ACL when the list of MAC addresses passed is empty. This 797 * command is used in AP/P2P GO mode. Driver has to make sure to clear its 798 * ACL list during %NL80211_CMD_STOP_AP. 799 * 800 * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once 801 * a radar is detected or the channel availability scan (CAC) has finished 802 * or was aborted, or a radar was detected, usermode will be notified with 803 * this event. This command is also used to notify userspace about radars 804 * while operating on this channel. 805 * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the 806 * event. 807 * 808 * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, 809 * i.e. features for the nl80211 protocol rather than device features. 810 * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. 811 * 812 * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition 813 * Information Element to the WLAN driver 814 * 815 * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver 816 * to the supplicant. This will carry the target AP's MAC address along 817 * with the relevant Information Elements. This event is used to report 818 * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). 819 * 820 * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running 821 * a critical protocol that needs more reliability in the connection to 822 * complete. 823 * 824 * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can 825 * return back to normal. 826 * 827 * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. 828 * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. 829 * 830 * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the 831 * the new channel information (Channel Switch Announcement - CSA) 832 * in the beacon for some time (as defined in the 833 * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the 834 * new channel. Userspace provides the new channel information (using 835 * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel 836 * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform 837 * other station that transmission must be blocked until the channel 838 * switch is complete. 839 * 840 * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified 841 * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in 842 * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in 843 * %NL80211_ATTR_VENDOR_DATA. 844 * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is 845 * used in the wiphy data as a nested attribute containing descriptions 846 * (&struct nl80211_vendor_cmd_info) of the supported vendor commands. 847 * This may also be sent as an event with the same attributes. 848 * 849 * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values. 850 * The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If 851 * that attribute is not included, QoS mapping is disabled. Since this 852 * QoS mapping is relevant for IP packets, it is only valid during an 853 * association. This is cleared on disassociation and AP restart. 854 * 855 * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given 856 * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO 857 * and %NL80211_ATTR_ADMITTED_TIME parameters. 858 * Note that the action frame handshake with the AP shall be handled by 859 * userspace via the normal management RX/TX framework, this only sets 860 * up the TX TS in the driver/device. 861 * If the admitted time attribute is not added then the request just checks 862 * if a subsequent setup could be successful, the intent is to use this to 863 * avoid setting up a session with the AP when local restrictions would 864 * make that impossible. However, the subsequent "real" setup may still 865 * fail even if the check was successful. 866 * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID 867 * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this 868 * before removing a station entry entirely, or before disassociating 869 * or similar, cleanup will happen in the driver/device in this case. 870 * 871 * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to 872 * destination %NL80211_ATTR_MAC on the interface identified by 873 * %NL80211_ATTR_IFINDEX. 874 * 875 * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and 876 * bandwidth of a channel must be given. 877 * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the 878 * network is determined by the network interface. 879 * 880 * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer, 881 * identified by the %NL80211_ATTR_MAC parameter. A target channel is 882 * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining 883 * channel width/type. The target operating class is given via 884 * %NL80211_ATTR_OPER_CLASS. 885 * The driver is responsible for continually initiating channel-switching 886 * operations and returning to the base channel for communication with the 887 * AP. 888 * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS 889 * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel 890 * when this command completes. 891 * 892 * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used 893 * as an event to indicate changes for devices with wiphy-specific regdom 894 * management. 895 * 896 * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is 897 * not running. The driver indicates the status of the scan through 898 * cfg80211_scan_done(). 899 * 900 * @NL80211_CMD_START_NAN: Start NAN operation, identified by its 901 * %NL80211_ATTR_WDEV interface. This interface must have been 902 * previously created with %NL80211_CMD_NEW_INTERFACE. After it 903 * has been started, the NAN interface will create or join a 904 * cluster. This command must have a valid 905 * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional 906 * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is 907 * omitted or set to 0, it means don't-care and the device will 908 * decide what to use. After this command NAN functions can be 909 * added. 910 * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by 911 * its %NL80211_ATTR_WDEV interface. 912 * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined 913 * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this 914 * operation returns the strictly positive and unique instance id 915 * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE) 916 * of the function upon success. 917 * Since instance ID's can be re-used, this cookie is the right 918 * way to identify the function. This will avoid races when a termination 919 * event is handled by the user space after it has already added a new 920 * function that got the same instance id from the kernel as the one 921 * which just terminated. 922 * This cookie may be used in NAN events even before the command 923 * returns, so userspace shouldn't process NAN events until it processes 924 * the response to this command. 925 * Look at %NL80211_ATTR_SOCKET_OWNER as well. 926 * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie. 927 * This command is also used as a notification sent when a NAN function is 928 * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID 929 * and %NL80211_ATTR_COOKIE attributes. 930 * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN 931 * configuration. NAN must be operational (%NL80211_CMD_START_NAN 932 * was executed). It must contain at least one of the following 933 * attributes: %NL80211_ATTR_NAN_MASTER_PREF, 934 * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the 935 * current configuration is not changed. If it is present but 936 * set to zero, the configuration is changed to don't-care 937 * (i.e. the device can decide what to do). 938 * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. 939 * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and 940 * %NL80211_ATTR_COOKIE. 941 * 942 * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters 943 * for subsequent roaming cases if the driver or firmware uses internal 944 * BSS selection. This command can be issued only while connected and it 945 * does not result in a change for the current association. Currently, 946 * only the %NL80211_ATTR_IE data is used and updated with this command. 947 * 948 * @NL80211_CMD_MAX: highest used command number 949 * @__NL80211_CMD_AFTER_LAST: internal use 950 */ 951 enum nl80211_commands { 952 /* don't change the order or add anything between, this is ABI! */ 953 NL80211_CMD_UNSPEC, 954 955 NL80211_CMD_GET_WIPHY, /* can dump */ 956 NL80211_CMD_SET_WIPHY, 957 NL80211_CMD_NEW_WIPHY, 958 NL80211_CMD_DEL_WIPHY, 959 960 NL80211_CMD_GET_INTERFACE, /* can dump */ 961 NL80211_CMD_SET_INTERFACE, 962 NL80211_CMD_NEW_INTERFACE, 963 NL80211_CMD_DEL_INTERFACE, 964 965 NL80211_CMD_GET_KEY, 966 NL80211_CMD_SET_KEY, 967 NL80211_CMD_NEW_KEY, 968 NL80211_CMD_DEL_KEY, 969 970 NL80211_CMD_GET_BEACON, 971 NL80211_CMD_SET_BEACON, 972 NL80211_CMD_START_AP, 973 NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, 974 NL80211_CMD_STOP_AP, 975 NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, 976 977 NL80211_CMD_GET_STATION, 978 NL80211_CMD_SET_STATION, 979 NL80211_CMD_NEW_STATION, 980 NL80211_CMD_DEL_STATION, 981 982 NL80211_CMD_GET_MPATH, 983 NL80211_CMD_SET_MPATH, 984 NL80211_CMD_NEW_MPATH, 985 NL80211_CMD_DEL_MPATH, 986 987 NL80211_CMD_SET_BSS, 988 989 NL80211_CMD_SET_REG, 990 NL80211_CMD_REQ_SET_REG, 991 992 NL80211_CMD_GET_MESH_CONFIG, 993 NL80211_CMD_SET_MESH_CONFIG, 994 995 NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, 996 997 NL80211_CMD_GET_REG, 998 999 NL80211_CMD_GET_SCAN, 1000 NL80211_CMD_TRIGGER_SCAN, 1001 NL80211_CMD_NEW_SCAN_RESULTS, 1002 NL80211_CMD_SCAN_ABORTED, 1003 1004 NL80211_CMD_REG_CHANGE, 1005 1006 NL80211_CMD_AUTHENTICATE, 1007 NL80211_CMD_ASSOCIATE, 1008 NL80211_CMD_DEAUTHENTICATE, 1009 NL80211_CMD_DISASSOCIATE, 1010 1011 NL80211_CMD_MICHAEL_MIC_FAILURE, 1012 1013 NL80211_CMD_REG_BEACON_HINT, 1014 1015 NL80211_CMD_JOIN_IBSS, 1016 NL80211_CMD_LEAVE_IBSS, 1017 1018 NL80211_CMD_TESTMODE, 1019 1020 NL80211_CMD_CONNECT, 1021 NL80211_CMD_ROAM, 1022 NL80211_CMD_DISCONNECT, 1023 1024 NL80211_CMD_SET_WIPHY_NETNS, 1025 1026 NL80211_CMD_GET_SURVEY, 1027 NL80211_CMD_NEW_SURVEY_RESULTS, 1028 1029 NL80211_CMD_SET_PMKSA, 1030 NL80211_CMD_DEL_PMKSA, 1031 NL80211_CMD_FLUSH_PMKSA, 1032 1033 NL80211_CMD_REMAIN_ON_CHANNEL, 1034 NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, 1035 1036 NL80211_CMD_SET_TX_BITRATE_MASK, 1037 1038 NL80211_CMD_REGISTER_FRAME, 1039 NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, 1040 NL80211_CMD_FRAME, 1041 NL80211_CMD_ACTION = NL80211_CMD_FRAME, 1042 NL80211_CMD_FRAME_TX_STATUS, 1043 NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, 1044 1045 NL80211_CMD_SET_POWER_SAVE, 1046 NL80211_CMD_GET_POWER_SAVE, 1047 1048 NL80211_CMD_SET_CQM, 1049 NL80211_CMD_NOTIFY_CQM, 1050 1051 NL80211_CMD_SET_CHANNEL, 1052 NL80211_CMD_SET_WDS_PEER, 1053 1054 NL80211_CMD_FRAME_WAIT_CANCEL, 1055 1056 NL80211_CMD_JOIN_MESH, 1057 NL80211_CMD_LEAVE_MESH, 1058 1059 NL80211_CMD_UNPROT_DEAUTHENTICATE, 1060 NL80211_CMD_UNPROT_DISASSOCIATE, 1061 1062 NL80211_CMD_NEW_PEER_CANDIDATE, 1063 1064 NL80211_CMD_GET_WOWLAN, 1065 NL80211_CMD_SET_WOWLAN, 1066 1067 NL80211_CMD_START_SCHED_SCAN, 1068 NL80211_CMD_STOP_SCHED_SCAN, 1069 NL80211_CMD_SCHED_SCAN_RESULTS, 1070 NL80211_CMD_SCHED_SCAN_STOPPED, 1071 1072 NL80211_CMD_SET_REKEY_OFFLOAD, 1073 1074 NL80211_CMD_PMKSA_CANDIDATE, 1075 1076 NL80211_CMD_TDLS_OPER, 1077 NL80211_CMD_TDLS_MGMT, 1078 1079 NL80211_CMD_UNEXPECTED_FRAME, 1080 1081 NL80211_CMD_PROBE_CLIENT, 1082 1083 NL80211_CMD_REGISTER_BEACONS, 1084 1085 NL80211_CMD_UNEXPECTED_4ADDR_FRAME, 1086 1087 NL80211_CMD_SET_NOACK_MAP, 1088 1089 NL80211_CMD_CH_SWITCH_NOTIFY, 1090 1091 NL80211_CMD_START_P2P_DEVICE, 1092 NL80211_CMD_STOP_P2P_DEVICE, 1093 1094 NL80211_CMD_CONN_FAILED, 1095 1096 NL80211_CMD_SET_MCAST_RATE, 1097 1098 NL80211_CMD_SET_MAC_ACL, 1099 1100 NL80211_CMD_RADAR_DETECT, 1101 1102 NL80211_CMD_GET_PROTOCOL_FEATURES, 1103 1104 NL80211_CMD_UPDATE_FT_IES, 1105 NL80211_CMD_FT_EVENT, 1106 1107 NL80211_CMD_CRIT_PROTOCOL_START, 1108 NL80211_CMD_CRIT_PROTOCOL_STOP, 1109 1110 NL80211_CMD_GET_COALESCE, 1111 NL80211_CMD_SET_COALESCE, 1112 1113 NL80211_CMD_CHANNEL_SWITCH, 1114 1115 NL80211_CMD_VENDOR, 1116 1117 NL80211_CMD_SET_QOS_MAP, 1118 1119 NL80211_CMD_ADD_TX_TS, 1120 NL80211_CMD_DEL_TX_TS, 1121 1122 NL80211_CMD_GET_MPP, 1123 1124 NL80211_CMD_JOIN_OCB, 1125 NL80211_CMD_LEAVE_OCB, 1126 1127 NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, 1128 1129 NL80211_CMD_TDLS_CHANNEL_SWITCH, 1130 NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, 1131 1132 NL80211_CMD_WIPHY_REG_CHANGE, 1133 1134 NL80211_CMD_ABORT_SCAN, 1135 1136 NL80211_CMD_START_NAN, 1137 NL80211_CMD_STOP_NAN, 1138 NL80211_CMD_ADD_NAN_FUNCTION, 1139 NL80211_CMD_DEL_NAN_FUNCTION, 1140 NL80211_CMD_CHANGE_NAN_CONFIG, 1141 NL80211_CMD_NAN_MATCH, 1142 1143 NL80211_CMD_SET_MULTICAST_TO_UNICAST, 1144 1145 NL80211_CMD_UPDATE_CONNECT_PARAMS, 1146 1147 /* add new commands above here */ 1148 1149 /* used to define NL80211_CMD_MAX below */ 1150 __NL80211_CMD_AFTER_LAST, 1151 NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 1152 }; 1153 1154 /* 1155 * Allow user space programs to use #ifdef on new commands by defining them 1156 * here 1157 */ 1158 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS 1159 #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE 1160 #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE 1161 #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE 1162 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE 1163 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE 1164 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE 1165 #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT 1166 1167 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS 1168 1169 /* source-level API compatibility */ 1170 #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG 1171 #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG 1172 #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE 1173 1174 /** 1175 * enum nl80211_attrs - nl80211 netlink attributes 1176 * 1177 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors 1178 * 1179 * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. 1180 * /sys/class/ieee80211/<phyname>/index 1181 * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) 1182 * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters 1183 * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, 1184 * defines the channel together with the (deprecated) 1185 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes 1186 * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 1187 * and %NL80211_ATTR_CENTER_FREQ2 1188 * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values 1189 * of &enum nl80211_chan_width, describing the channel width. See the 1190 * documentation of the enum for more information. 1191 * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the 1192 * channel, used for anything but 20 MHz bandwidth 1193 * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the 1194 * channel, used only for 80+80 MHz bandwidth 1195 * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ 1196 * if HT20 or HT40 are to be used (i.e., HT disabled if not included): 1197 * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including 1198 * this attribute) 1199 * NL80211_CHAN_HT20 = HT20 only 1200 * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel 1201 * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel 1202 * This attribute is now deprecated. 1203 * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is 1204 * less than or equal to the RTS threshold; allowed range: 1..255; 1205 * dot11ShortRetryLimit; u8 1206 * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is 1207 * greater than the RTS threshold; allowed range: 1..255; 1208 * dot11ShortLongLimit; u8 1209 * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum 1210 * length in octets for frames; allowed range: 256..8000, disable 1211 * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 1212 * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length 1213 * larger than or equal to this use RTS/CTS handshake); allowed range: 1214 * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 1215 * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 1216 * section 7.3.2.9; dot11CoverageClass; u8 1217 * 1218 * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on 1219 * @NL80211_ATTR_IFNAME: network interface name 1220 * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype 1221 * 1222 * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices 1223 * that don't have a netdev (u64) 1224 * 1225 * @NL80211_ATTR_MAC: MAC address (various uses) 1226 * 1227 * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of 1228 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC 1229 * keys 1230 * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) 1231 * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 1232 * section 7.3.2.25.1, e.g. 0x000FAC04) 1233 * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and 1234 * CCMP keys, each six bytes in little endian 1235 * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key 1236 * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the 1237 * default management key 1238 * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or 1239 * other commands, indicates which pairwise cipher suites are used 1240 * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or 1241 * other commands, indicates which group cipher suite is used 1242 * 1243 * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU 1244 * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing 1245 * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE 1246 * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE 1247 * 1248 * @NL80211_ATTR_STA_AID: Association ID for the station (u16) 1249 * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of 1250 * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) 1251 * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by 1252 * IEEE 802.11 7.3.1.6 (u16). 1253 * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported 1254 * rates as defined by IEEE 802.11 7.3.2.2 but without the length 1255 * restriction (at most %NL80211_MAX_SUPP_RATES). 1256 * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station 1257 * to, or the AP interface the station was originally added to to. 1258 * @NL80211_ATTR_STA_INFO: information about a station, part of station info 1259 * given for %NL80211_CMD_GET_STATION, nested attribute containing 1260 * info as possible, see &enum nl80211_sta_info. 1261 * 1262 * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, 1263 * consisting of a nested array. 1264 * 1265 * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). 1266 * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link 1267 * (see &enum nl80211_plink_action). 1268 * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. 1269 * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path 1270 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at 1271 * &enum nl80211_mpath_info. 1272 * 1273 * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of 1274 * &enum nl80211_mntr_flags. 1275 * 1276 * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the 1277 * current regulatory domain should be set to or is already set to. 1278 * For example, 'CR', for Costa Rica. This attribute is used by the kernel 1279 * to query the CRDA to retrieve one regulatory domain. This attribute can 1280 * also be used by userspace to query the kernel for the currently set 1281 * regulatory domain. We chose an alpha2 as that is also used by the 1282 * IEEE-802.11 country information element to identify a country. 1283 * Users can also simply ask the wireless core to set regulatory domain 1284 * to a specific alpha2. 1285 * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory 1286 * rules. 1287 * 1288 * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) 1289 * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled 1290 * (u8, 0 or 1) 1291 * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled 1292 * (u8, 0 or 1) 1293 * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic 1294 * rates in format defined by IEEE 802.11 7.3.2.2 but without the length 1295 * restriction (at most %NL80211_MAX_SUPP_RATES). 1296 * 1297 * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from 1298 * association request when used with NL80211_CMD_NEW_STATION) 1299 * 1300 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all 1301 * supported interface types, each a flag attribute with the number 1302 * of the interface mode. 1303 * 1304 * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for 1305 * %NL80211_CMD_SET_MGMT_EXTRA_IE. 1306 * 1307 * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with 1308 * %NL80211_CMD_SET_MGMT_EXTRA_IE). 1309 * 1310 * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with 1311 * a single scan request, a wiphy attribute. 1312 * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can 1313 * scan with a single scheduled scan request, a wiphy attribute. 1314 * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements 1315 * that can be added to a scan request 1316 * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information 1317 * elements that can be added to a scheduled scan request 1318 * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be 1319 * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. 1320 * 1321 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) 1322 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive 1323 * scanning and include a zero-length SSID (wildcard) for wildcard scan 1324 * @NL80211_ATTR_BSS: scan result BSS 1325 * 1326 * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain 1327 * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* 1328 * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently 1329 * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) 1330 * 1331 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies 1332 * an array of command numbers (i.e. a mapping index to command number) 1333 * that the driver for the given wiphy supports. 1334 * 1335 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header 1336 * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and 1337 * NL80211_CMD_ASSOCIATE events 1338 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) 1339 * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, 1340 * represented as a u32 1341 * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and 1342 * %NL80211_CMD_DISASSOCIATE, u16 1343 * 1344 * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as 1345 * a u32 1346 * 1347 * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change 1348 * due to considerations from a beacon hint. This attribute reflects 1349 * the state of the channel _before_ the beacon hint processing. This 1350 * attributes consists of a nested attribute containing 1351 * NL80211_FREQUENCY_ATTR_* 1352 * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change 1353 * due to considerations from a beacon hint. This attribute reflects 1354 * the state of the channel _after_ the beacon hint processing. This 1355 * attributes consists of a nested attribute containing 1356 * NL80211_FREQUENCY_ATTR_* 1357 * 1358 * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported 1359 * cipher suites 1360 * 1361 * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look 1362 * for other networks on different channels 1363 * 1364 * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this 1365 * is used, e.g., with %NL80211_CMD_AUTHENTICATE event 1366 * 1367 * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is 1368 * used for the association (&enum nl80211_mfp, represented as a u32); 1369 * this attribute can be used 1370 * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests 1371 * 1372 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a 1373 * &struct nl80211_sta_flag_update. 1374 * 1375 * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls 1376 * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in 1377 * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE 1378 * request, the driver will assume that the port is unauthorized until 1379 * authorized by user space. Otherwise, port is marked authorized by 1380 * default in station mode. 1381 * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the 1382 * ethertype that will be used for key negotiation. It can be 1383 * specified with the associate and connect commands. If it is not 1384 * specified, the value defaults to 0x888E (PAE, 802.1X). This 1385 * attribute is also used as a flag in the wiphy information to 1386 * indicate that protocols other than PAE are supported. 1387 * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with 1388 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom 1389 * ethertype frames used for key negotiation must not be encrypted. 1390 * 1391 * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. 1392 * We recommend using nested, driver-specific attributes within this. 1393 * 1394 * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT 1395 * event was due to the AP disconnecting the station, and not due to 1396 * a local disconnect request. 1397 * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT 1398 * event (u16) 1399 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating 1400 * that protected APs should be used. This is also used with NEW_BEACON to 1401 * indicate that the BSS is to use protection. 1402 * 1403 * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON 1404 * to indicate which unicast key ciphers will be used with the connection 1405 * (an array of u32). 1406 * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 1407 * indicate which group key cipher will be used with the connection (a 1408 * u32). 1409 * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 1410 * indicate which WPA version(s) the AP we want to associate with is using 1411 * (a u32 with flags from &enum nl80211_wpa_versions). 1412 * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 1413 * indicate which key management algorithm(s) to use (an array of u32). 1414 * 1415 * @NL80211_ATTR_REQ_IE: (Re)association request information elements as 1416 * sent out by the card, for ROAM and successful CONNECT events. 1417 * @NL80211_ATTR_RESP_IE: (Re)association response information elements as 1418 * sent by peer, for ROAM and successful CONNECT events. 1419 * 1420 * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT 1421 * commands to specify a request to reassociate within an ESS, i.e., to use 1422 * Reassociate Request frame (with the value of this attribute in the 1423 * Current AP address field) instead of Association Request frame which is 1424 * used for the initial association to an ESS. 1425 * 1426 * @NL80211_ATTR_KEY: key information in a nested attribute with 1427 * %NL80211_KEY_* sub-attributes 1428 * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() 1429 * and join_ibss(), key information is in a nested attribute each 1430 * with %NL80211_KEY_* sub-attributes 1431 * 1432 * @NL80211_ATTR_PID: Process ID of a network namespace. 1433 * 1434 * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for 1435 * dumps. This number increases whenever the object list being 1436 * dumped changes, and as such userspace can verify that it has 1437 * obtained a complete and consistent snapshot by verifying that 1438 * all dump messages contain the same generation number. If it 1439 * changed then the list changed and the dump should be repeated 1440 * completely from scratch. 1441 * 1442 * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface 1443 * 1444 * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of 1445 * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute 1446 * containing info as possible, see &enum survey_info. 1447 * 1448 * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. 1449 * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can 1450 * cache, a wiphy attribute. 1451 * 1452 * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. 1453 * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that 1454 * specifies the maximum duration that can be requested with the 1455 * remain-on-channel operation, in milliseconds, u32. 1456 * 1457 * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. 1458 * 1459 * @NL80211_ATTR_TX_RATES: Nested set of attributes 1460 * (enum nl80211_tx_rate_attributes) describing TX rates per band. The 1461 * enum nl80211_band value is used as the index (nla_type() of the nested 1462 * data. If a band is not included, it will be configured to allow all 1463 * rates based on negotiated supported rates information. This attribute 1464 * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, 1465 * and joining mesh networks (not IBSS yet). In the later case, it must 1466 * specify just a single bitrate, which is to be used for the beacon. 1467 * The driver must also specify support for this with the extended 1468 * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, 1469 * NL80211_EXT_FEATURE_BEACON_RATE_HT and 1470 * NL80211_EXT_FEATURE_BEACON_RATE_VHT. 1471 * 1472 * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain 1473 * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. 1474 * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the 1475 * @NL80211_CMD_REGISTER_FRAME command. 1476 * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a 1477 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing 1478 * information about which frame types can be transmitted with 1479 * %NL80211_CMD_FRAME. 1480 * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a 1481 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing 1482 * information about which frame types can be registered for RX. 1483 * 1484 * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was 1485 * acknowledged by the recipient. 1486 * 1487 * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. 1488 * 1489 * @NL80211_ATTR_CQM: connection quality monitor configuration in a 1490 * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. 1491 * 1492 * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command 1493 * is requesting a local authentication/association state change without 1494 * invoking actual management frame exchange. This can be used with 1495 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, 1496 * NL80211_CMD_DISASSOCIATE. 1497 * 1498 * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations 1499 * connected to this BSS. 1500 * 1501 * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See 1502 * &enum nl80211_tx_power_setting for possible values. 1503 * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. 1504 * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING 1505 * for non-automatic settings. 1506 * 1507 * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly 1508 * means support for per-station GTKs. 1509 * 1510 * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. 1511 * This can be used to mask out antennas which are not attached or should 1512 * not be used for transmitting. If an antenna is not selected in this 1513 * bitmap the hardware is not allowed to transmit on this antenna. 1514 * 1515 * Each bit represents one antenna, starting with antenna 1 at the first 1516 * bit. Depending on which antennas are selected in the bitmap, 802.11n 1517 * drivers can derive which chainmasks to use (if all antennas belonging to 1518 * a particular chain are disabled this chain should be disabled) and if 1519 * a chain has diversity antennas wether diversity should be used or not. 1520 * HT capabilities (STBC, TX Beamforming, Antenna selection) can be 1521 * derived from the available chains after applying the antenna mask. 1522 * Non-802.11n drivers can derive wether to use diversity or not. 1523 * Drivers may reject configurations or RX/TX mask combinations they cannot 1524 * support by returning -EINVAL. 1525 * 1526 * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. 1527 * This can be used to mask out antennas which are not attached or should 1528 * not be used for receiving. If an antenna is not selected in this bitmap 1529 * the hardware should not be configured to receive on this antenna. 1530 * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. 1531 * 1532 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available 1533 * for configuration as TX antennas via the above parameters. 1534 * 1535 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available 1536 * for configuration as RX antennas via the above parameters. 1537 * 1538 * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS 1539 * 1540 * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be 1541 * transmitted on another channel when the channel given doesn't match 1542 * the current channel. If the current channel doesn't match and this 1543 * flag isn't set, the frame will be rejected. This is also used as an 1544 * nl80211 capability flag. 1545 * 1546 * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) 1547 * 1548 * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags 1549 * attributes, specifying what a key should be set as default as. 1550 * See &enum nl80211_key_default_types. 1551 * 1552 * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be 1553 * changed once the mesh is active. 1554 * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute 1555 * containing attributes from &enum nl80211_meshconf_params. 1556 * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver 1557 * allows auth frames in a mesh to be passed to userspace for processing via 1558 * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. 1559 * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in 1560 * &enum nl80211_plink_state. Used when userspace is driving the peer link 1561 * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or 1562 * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. 1563 * 1564 * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy 1565 * capabilities, the supported WoWLAN triggers 1566 * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to 1567 * indicate which WoW triggers should be enabled. This is also 1568 * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN 1569 * triggers. 1570 * 1571 * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan 1572 * cycles, in msecs. 1573 * 1574 * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more 1575 * sets of attributes to match during scheduled scans. Only BSSs 1576 * that match any of the sets will be reported. These are 1577 * pass-thru filter rules. 1578 * For a match to succeed, the BSS must match all attributes of a 1579 * set. Since not every hardware supports matching all types of 1580 * attributes, there is no guarantee that the reported BSSs are 1581 * fully complying with the match sets and userspace needs to be 1582 * able to ignore them by itself. 1583 * Thus, the implementation is somewhat hardware-dependent, but 1584 * this is only an optimization and the userspace application 1585 * needs to handle all the non-filtered results anyway. 1586 * If the match attributes don't make sense when combined with 1587 * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID 1588 * is included in the probe request, but the match attributes 1589 * will never let it go through), -EINVAL may be returned. 1590 * If ommited, no filtering is done. 1591 * 1592 * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported 1593 * interface combinations. In each nested item, it contains attributes 1594 * defined in &enum nl80211_if_combination_attrs. 1595 * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like 1596 * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that 1597 * are managed in software: interfaces of these types aren't subject to 1598 * any restrictions in their number or combinations. 1599 * 1600 * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information 1601 * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. 1602 * 1603 * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, 1604 * nested array attribute containing an entry for each band, with the entry 1605 * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but 1606 * without the length restriction (at most %NL80211_MAX_SUPP_RATES). 1607 * 1608 * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon 1609 * and Probe Response (when response to wildcard Probe Request); see 1610 * &enum nl80211_hidden_ssid, represented as a u32 1611 * 1612 * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. 1613 * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to 1614 * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the 1615 * driver (or firmware) replies to Probe Request frames. 1616 * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association 1617 * Response frames. This is used with %NL80211_CMD_NEW_BEACON and 1618 * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into 1619 * (Re)Association Response frames when the driver (or firmware) replies to 1620 * (Re)Association Request frames. 1621 * 1622 * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration 1623 * of the station, see &enum nl80211_sta_wme_attr. 1624 * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working 1625 * as AP. 1626 * 1627 * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of 1628 * roaming to another AP in the same ESS if the signal lever is low. 1629 * 1630 * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching 1631 * candidate information, see &enum nl80211_pmksa_candidate_attr. 1632 * 1633 * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not 1634 * for management frames transmission. In order to avoid p2p probe/action 1635 * frames are being transmitted at CCK rate in 2GHz band, the user space 1636 * applications use this attribute. 1637 * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and 1638 * %NL80211_CMD_FRAME commands. 1639 * 1640 * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup 1641 * request, link setup confirm, link teardown, etc.). Values are 1642 * described in the TDLS (802.11z) specification. 1643 * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a 1644 * TDLS conversation between two devices. 1645 * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see 1646 * &enum nl80211_tdls_operation, represented as a u8. 1647 * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate 1648 * as a TDLS peer sta. 1649 * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown 1650 * procedures should be performed by sending TDLS packets via 1651 * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be 1652 * used for asking the driver to perform a TDLS operation. 1653 * 1654 * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices 1655 * that have AP support to indicate that they have the AP SME integrated 1656 * with support for the features listed in this attribute, see 1657 * &enum nl80211_ap_sme_features. 1658 * 1659 * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells 1660 * the driver to not wait for an acknowledgement. Note that due to this, 1661 * it will also not give a status callback nor return a cookie. This is 1662 * mostly useful for probe responses to save airtime. 1663 * 1664 * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from 1665 * &enum nl80211_feature_flags and is advertised in wiphy information. 1666 * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe 1667 * requests while operating in AP-mode. 1668 * This attribute holds a bitmap of the supported protocols for 1669 * offloading (see &enum nl80211_probe_resp_offload_support_attr). 1670 * 1671 * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire 1672 * probe-response frame. The DA field in the 802.11 header is zero-ed out, 1673 * to be filled by the FW. 1674 * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable 1675 * this feature. Currently, only supported in mac80211 drivers. 1676 * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the 1677 * ATTR_HT_CAPABILITY to which attention should be paid. 1678 * Currently, only mac80211 NICs support this feature. 1679 * The values that may be configured are: 1680 * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 1681 * AMPDU density and AMPDU factor. 1682 * All values are treated as suggestions and may be ignored 1683 * by the driver as required. The actual values may be seen in 1684 * the station debugfs ht_caps file. 1685 * 1686 * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country 1687 * abides to when initiating radiation on DFS channels. A country maps 1688 * to one DFS region. 1689 * 1690 * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of 1691 * up to 16 TIDs. 1692 * 1693 * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be 1694 * used by the drivers which has MLME in firmware and does not have support 1695 * to report per station tx/rx activity to free up the staion entry from 1696 * the list. This needs to be used when the driver advertises the 1697 * capability to timeout the stations. 1698 * 1699 * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); 1700 * this attribute is (depending on the driver capabilities) added to 1701 * received frames indicated with %NL80211_CMD_FRAME. 1702 * 1703 * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds 1704 * or 0 to disable background scan. 1705 * 1706 * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from 1707 * userspace. If unset it is assumed the hint comes directly from 1708 * a user. If set code could specify exactly what type of source 1709 * was used to provide the hint. For the different types of 1710 * allowed user regulatory hints see nl80211_user_reg_hint_type. 1711 * 1712 * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected 1713 * the connection request from a station. nl80211_connect_failed_reason 1714 * enum has different reasons of connection failure. 1715 * 1716 * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames. 1717 * This contains the authentication frame body (non-IE and IE data), 1718 * excluding the Authentication algorithm number, i.e., starting at the 1719 * Authentication transaction sequence number field. It is used with 1720 * authentication algorithms that need special fields to be added into 1721 * the frames (SAE and FILS). Currently, only the SAE cases use the 1722 * initial two fields (Authentication transaction sequence number and 1723 * Status code). However, those fields are included in the attribute data 1724 * for all authentication algorithms to keep the attribute definition 1725 * consistent. 1726 * 1727 * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from 1728 * association request when used with NL80211_CMD_NEW_STATION) 1729 * 1730 * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) 1731 * 1732 * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with 1733 * the START_AP and SET_BSS commands 1734 * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the 1735 * START_AP and SET_BSS commands. This can have the values 0 or 1; 1736 * if not given in START_AP 0 is assumed, if not given in SET_BSS 1737 * no change is made. 1738 * 1739 * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode 1740 * defined in &enum nl80211_mesh_power_mode. 1741 * 1742 * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, 1743 * carried in a u32 attribute 1744 * 1745 * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for 1746 * MAC ACL. 1747 * 1748 * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum 1749 * number of MAC addresses that a device can support for MAC 1750 * ACL. 1751 * 1752 * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, 1753 * contains a value of enum nl80211_radar_event (u32). 1754 * 1755 * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver 1756 * has and handles. The format is the same as the IE contents. See 1757 * 802.11-2012 8.4.2.29 for more information. 1758 * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver 1759 * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. 1760 * 1761 * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to 1762 * the driver, e.g., to enable TDLS power save (PU-APSD). 1763 * 1764 * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are 1765 * advertised to the driver, e.g., to enable TDLS off channel operations 1766 * and PU-APSD. 1767 * 1768 * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see 1769 * &enum nl80211_protocol_features, the attribute is a u32. 1770 * 1771 * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports 1772 * receiving the data for a single wiphy split across multiple 1773 * messages, given with wiphy dump message 1774 * 1775 * @NL80211_ATTR_MDID: Mobility Domain Identifier 1776 * 1777 * @NL80211_ATTR_IE_RIC: Resource Information Container Information 1778 * Element 1779 * 1780 * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased 1781 * reliability, see &enum nl80211_crit_proto_id (u16). 1782 * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which 1783 * the connection should have increased reliability (u16). 1784 * 1785 * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). 1786 * This is similar to @NL80211_ATTR_STA_AID but with a difference of being 1787 * allowed to be used with the first @NL80211_CMD_SET_STATION command to 1788 * update a TDLS peer STA entry. 1789 * 1790 * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. 1791 * 1792 * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's 1793 * until the channel switch event. 1794 * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission 1795 * must be blocked on the current channel (before the channel switch 1796 * operation). 1797 * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information 1798 * for the time while performing a channel switch. 1799 * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel 1800 * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). 1801 * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel 1802 * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). 1803 * 1804 * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. 1805 * As specified in the &enum nl80211_rxmgmt_flags. 1806 * 1807 * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. 1808 * 1809 * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported 1810 * supported operating classes. 1811 * 1812 * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space 1813 * controls DFS operation in IBSS mode. If the flag is included in 1814 * %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS 1815 * channels and reports radar events to userspace. Userspace is required 1816 * to react to radar events, e.g. initiate a channel switch or leave the 1817 * IBSS network. 1818 * 1819 * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports 1820 * 5 MHz channel bandwidth. 1821 * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports 1822 * 10 MHz channel bandwidth. 1823 * 1824 * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode 1825 * Notification Element based on association request when used with 1826 * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when 1827 * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS); 1828 * u8 attribute. 1829 * 1830 * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if 1831 * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) 1832 * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command 1833 * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this 1834 * attribute is also used for vendor command feature advertisement 1835 * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy 1836 * info, containing a nested array of possible events 1837 * 1838 * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This 1839 * data is in the format defined for the payload of the QoS Map Set element 1840 * in IEEE Std 802.11-2012, 8.4.2.97. 1841 * 1842 * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS 1843 * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS 1844 * 1845 * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many 1846 * associated stations are supported in AP mode (including P2P GO); u32. 1847 * Since drivers may not have a fixed limit on the maximum number (e.g., 1848 * other concurrent operations may affect this), drivers are allowed to 1849 * advertise values that cannot always be met. In such cases, an attempt 1850 * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. 1851 * 1852 * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which 1853 * should be updated when the frame is transmitted. 1854 * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum 1855 * supported number of csa counters. 1856 * 1857 * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. 1858 * As specified in the &enum nl80211_tdls_peer_capability. 1859 * 1860 * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface 1861 * creation then the new interface will be owned by the netlink socket 1862 * that created it and will be destroyed when the socket is closed. 1863 * If set during scheduled scan start then the new scan req will be 1864 * owned by the netlink socket that created it and the scheduled scan will 1865 * be stopped when the socket is closed. 1866 * If set during configuration of regulatory indoor operation then the 1867 * regulatory indoor configuration would be owned by the netlink socket 1868 * that configured the indoor setting, and the indoor operation would be 1869 * cleared when the socket is closed. 1870 * If set during NAN interface creation, the interface will be destroyed 1871 * if the socket is closed just like any other interface. Moreover, only 1872 * the netlink socket that created the interface will be allowed to add 1873 * and remove functions. NAN notifications will be sent in unicast to that 1874 * socket. Without this attribute, any socket can add functions and the 1875 * notifications will be sent to the %NL80211_MCGRP_NAN multicast group. 1876 * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the 1877 * station will deauthenticate when the socket is closed. 1878 * 1879 * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is 1880 * the TDLS link initiator. 1881 * 1882 * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection 1883 * shall support Radio Resource Measurements (11k). This attribute can be 1884 * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. 1885 * User space applications are expected to use this flag only if the 1886 * underlying device supports these minimal RRM features: 1887 * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, 1888 * %NL80211_FEATURE_QUIET, 1889 * Or, if global RRM is supported, see: 1890 * %NL80211_EXT_FEATURE_RRM 1891 * If this flag is used, driver must add the Power Capabilities IE to the 1892 * association request. In addition, it must also set the RRM capability 1893 * flag in the association request's Capability Info field. 1894 * 1895 * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout 1896 * estimation algorithm (dynack). In order to activate dynack 1897 * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower 1898 * drivers to indicate dynack capability. Dynack is automatically disabled 1899 * setting valid value for coverage class. 1900 * 1901 * @NL80211_ATTR_TSID: a TSID value (u8 attribute) 1902 * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) 1903 * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds 1904 * (per second) (u16 attribute) 1905 * 1906 * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see 1907 * &enum nl80211_smps_mode. 1908 * 1909 * @NL80211_ATTR_OPER_CLASS: operating class 1910 * 1911 * @NL80211_ATTR_MAC_MASK: MAC address mask 1912 * 1913 * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device 1914 * is self-managing its regulatory information and any regulatory domain 1915 * obtained from it is coming from the device's wiphy and not the global 1916 * cfg80211 regdomain. 1917 * 1918 * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte 1919 * array. The feature flags are identified by their bit index (see &enum 1920 * nl80211_ext_feature_index). The bit index is ordered starting at the 1921 * least-significant bit of the first byte in the array, ie. bit index 0 1922 * is located at bit 0 of byte 0. bit index 25 would be located at bit 1 1923 * of byte 3 (u8 array). 1924 * 1925 * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be 1926 * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY 1927 * may return a survey entry without a channel indicating global radio 1928 * statistics (only some values are valid and make sense.) 1929 * For devices that don't return such an entry even then, the information 1930 * should be contained in the result as the sum of the respective counters 1931 * over all channels. 1932 * 1933 * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a 1934 * scheduled scan is started. Or the delay before a WoWLAN 1935 * net-detect scan is started, counting from the moment the 1936 * system is suspended. This value is a u32, in seconds. 1937 1938 * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device 1939 * is operating in an indoor environment. 1940 * 1941 * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for 1942 * scheduled scan supported by the device (u32), a wiphy attribute. 1943 * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for 1944 * a scan plan (u32), a wiphy attribute. 1945 * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in 1946 * a scan plan (u32), a wiphy attribute. 1947 * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan. 1948 * Each scan plan defines the number of scan iterations and the interval 1949 * between scans. The last scan plan will always run infinitely, 1950 * thus it must not specify the number of iterations, only the interval 1951 * between scans. The scan plans are executed sequentially. 1952 * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. 1953 * @NL80211_ATTR_PBSS: flag attribute. If set it means operate 1954 * in a PBSS. Specified in %NL80211_CMD_CONNECT to request 1955 * connecting to a PCP, and in %NL80211_CMD_START_AP to start 1956 * a PCP instead of AP. Relevant for DMG networks only. 1957 * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the 1958 * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains 1959 * attributes according &enum nl80211_bss_select_attr to indicate what 1960 * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT 1961 * it contains the behaviour-specific attribute containing the parameters for 1962 * BSS selection to be done by driver and/or firmware. 1963 * 1964 * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported 1965 * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status 1966 * 1967 * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment 1968 * 1969 * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: 1970 * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, 1971 * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities per 1972 * interface type. 1973 * 1974 * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO 1975 * groupID for monitor mode. 1976 * The first 8 bytes are a mask that defines the membership in each 1977 * group (there are 64 groups, group 0 and 63 are reserved), 1978 * each bit represents a group and set to 1 for being a member in 1979 * that group and 0 for not being a member. 1980 * The remaining 16 bytes define the position in each group: 2 bits for 1981 * each group. 1982 * (smaller group numbers represented on most significant bits and bigger 1983 * group numbers on least significant bits.) 1984 * This attribute is used only if all interfaces are in monitor mode. 1985 * Set this attribute in order to monitor packets using the given MU-MIMO 1986 * groupID data. 1987 * to turn off that feature set all the bits of the groupID to zero. 1988 * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow 1989 * when using MU-MIMO air sniffer. 1990 * to turn that feature off set an invalid mac address 1991 * (e.g. FF:FF:FF:FF:FF:FF) 1992 * 1993 * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually 1994 * started (u64). The time is the TSF of the BSS the interface that 1995 * requested the scan is connected to (if available, otherwise this 1996 * attribute must not be included). 1997 * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which 1998 * %NL80211_ATTR_SCAN_START_TIME_TSF is set. 1999 * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If 2000 * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the 2001 * maximum measurement duration allowed. This attribute is used with 2002 * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN 2003 * if the scan is used for beacon report radio measurement. 2004 * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates 2005 * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is 2006 * mandatory. If this flag is not set, the duration is the maximum duration 2007 * and the actual measurement duration may be shorter. 2008 * 2009 * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is 2010 * used to pull the stored data for mesh peer in power save state. 2011 * 2012 * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by 2013 * %NL80211_CMD_START_NAN and optionally with 2014 * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. 2015 * Also, values 1 and 255 are reserved for certification purposes and 2016 * should not be used during a normal device operation. 2017 * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32 2018 * bitmask of BIT(NL80211_BAND_*) as described in %enum 2019 * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0 2020 * would be set. This attribute is used with 2021 * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and 2022 * it is optional. If no bands are set, it means don't-care and 2023 * the device will decide what to use. 2024 * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See 2025 * &enum nl80211_nan_func_attributes for description of this nested 2026 * attribute. 2027 * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. 2028 * See &enum nl80211_nan_match_attributes. 2029 * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame 2030 * protection. 2031 * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association 2032 * Request/Response frame protection. This attribute contains the 16 octet 2033 * STA Nonce followed by 16 octets of AP Nonce. 2034 * 2035 * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast 2036 * packets should be send out as unicast to all stations (flag attribute). 2037 * 2038 * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also 2039 * used in various commands/events for specifying the BSSID. 2040 * 2041 * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which 2042 * other BSSs has to be better or slightly worse than the current 2043 * connected BSS so that they get reported to user space. 2044 * This will give an opportunity to userspace to consider connecting to 2045 * other matching BSSs which have better or slightly worse RSSI than 2046 * the current connected BSS by using an offloaded operation to avoid 2047 * unnecessary wakeups. 2048 * 2049 * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in 2050 * the specified band is to be adjusted before doing 2051 * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparision to figure out 2052 * better BSSs. The attribute value is a packed structure 2053 * value as specified by &struct nl80211_bss_select_rssi_adjust. 2054 * 2055 * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out. 2056 * u32 attribute with an &enum nl80211_timeout_reason value. This is used, 2057 * e.g., with %NL80211_CMD_CONNECT event. 2058 * 2059 * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP) 2060 * username part of NAI used to refer keys rRK and rIK. This is used with 2061 * %NL80211_CMD_CONNECT. 2062 * 2063 * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part 2064 * of NAI specifying the domain name of the ER server. This is used with 2065 * %NL80211_CMD_CONNECT. 2066 * 2067 * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number 2068 * to use in ERP messages. This is used in generating the FILS wrapped data 2069 * for FILS authentication and is used with %NL80211_CMD_CONNECT. 2070 * 2071 * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the 2072 * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and 2073 * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK 2074 * from successful FILS authentication and is used with 2075 * %NL80211_CMD_CONNECT. 2076 * 2077 * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP 2078 * identifying the scope of PMKSAs. This is used with 2079 * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. 2080 * 2081 * @NL80211_ATTR_PMK: PMK for the PMKSA identified by %NL80211_ATTR_PMKID. 2082 * This is used with @NL80211_CMD_SET_PMKSA. 2083 * 2084 * @NUM_NL80211_ATTR: total number of nl80211_attrs available 2085 * @NL80211_ATTR_MAX: highest attribute number currently defined 2086 * @__NL80211_ATTR_AFTER_LAST: internal use 2087 */ 2088 enum nl80211_attrs { 2089 /* don't change the order or add anything between, this is ABI! */ 2090 NL80211_ATTR_UNSPEC, 2091 2092 NL80211_ATTR_WIPHY, 2093 NL80211_ATTR_WIPHY_NAME, 2094 2095 NL80211_ATTR_IFINDEX, 2096 NL80211_ATTR_IFNAME, 2097 NL80211_ATTR_IFTYPE, 2098 2099 NL80211_ATTR_MAC, 2100 2101 NL80211_ATTR_KEY_DATA, 2102 NL80211_ATTR_KEY_IDX, 2103 NL80211_ATTR_KEY_CIPHER, 2104 NL80211_ATTR_KEY_SEQ, 2105 NL80211_ATTR_KEY_DEFAULT, 2106 2107 NL80211_ATTR_BEACON_INTERVAL, 2108 NL80211_ATTR_DTIM_PERIOD, 2109 NL80211_ATTR_BEACON_HEAD, 2110 NL80211_ATTR_BEACON_TAIL, 2111 2112 NL80211_ATTR_STA_AID, 2113 NL80211_ATTR_STA_FLAGS, 2114 NL80211_ATTR_STA_LISTEN_INTERVAL, 2115 NL80211_ATTR_STA_SUPPORTED_RATES, 2116 NL80211_ATTR_STA_VLAN, 2117 NL80211_ATTR_STA_INFO, 2118 2119 NL80211_ATTR_WIPHY_BANDS, 2120 2121 NL80211_ATTR_MNTR_FLAGS, 2122 2123 NL80211_ATTR_MESH_ID, 2124 NL80211_ATTR_STA_PLINK_ACTION, 2125 NL80211_ATTR_MPATH_NEXT_HOP, 2126 NL80211_ATTR_MPATH_INFO, 2127 2128 NL80211_ATTR_BSS_CTS_PROT, 2129 NL80211_ATTR_BSS_SHORT_PREAMBLE, 2130 NL80211_ATTR_BSS_SHORT_SLOT_TIME, 2131 2132 NL80211_ATTR_HT_CAPABILITY, 2133 2134 NL80211_ATTR_SUPPORTED_IFTYPES, 2135 2136 NL80211_ATTR_REG_ALPHA2, 2137 NL80211_ATTR_REG_RULES, 2138 2139 NL80211_ATTR_MESH_CONFIG, 2140 2141 NL80211_ATTR_BSS_BASIC_RATES, 2142 2143 NL80211_ATTR_WIPHY_TXQ_PARAMS, 2144 NL80211_ATTR_WIPHY_FREQ, 2145 NL80211_ATTR_WIPHY_CHANNEL_TYPE, 2146 2147 NL80211_ATTR_KEY_DEFAULT_MGMT, 2148 2149 NL80211_ATTR_MGMT_SUBTYPE, 2150 NL80211_ATTR_IE, 2151 2152 NL80211_ATTR_MAX_NUM_SCAN_SSIDS, 2153 2154 NL80211_ATTR_SCAN_FREQUENCIES, 2155 NL80211_ATTR_SCAN_SSIDS, 2156 NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ 2157 NL80211_ATTR_BSS, 2158 2159 NL80211_ATTR_REG_INITIATOR, 2160 NL80211_ATTR_REG_TYPE, 2161 2162 NL80211_ATTR_SUPPORTED_COMMANDS, 2163 2164 NL80211_ATTR_FRAME, 2165 NL80211_ATTR_SSID, 2166 NL80211_ATTR_AUTH_TYPE, 2167 NL80211_ATTR_REASON_CODE, 2168 2169 NL80211_ATTR_KEY_TYPE, 2170 2171 NL80211_ATTR_MAX_SCAN_IE_LEN, 2172 NL80211_ATTR_CIPHER_SUITES, 2173 2174 NL80211_ATTR_FREQ_BEFORE, 2175 NL80211_ATTR_FREQ_AFTER, 2176 2177 NL80211_ATTR_FREQ_FIXED, 2178 2179 2180 NL80211_ATTR_WIPHY_RETRY_SHORT, 2181 NL80211_ATTR_WIPHY_RETRY_LONG, 2182 NL80211_ATTR_WIPHY_FRAG_THRESHOLD, 2183 NL80211_ATTR_WIPHY_RTS_THRESHOLD, 2184 2185 NL80211_ATTR_TIMED_OUT, 2186 2187 NL80211_ATTR_USE_MFP, 2188 2189 NL80211_ATTR_STA_FLAGS2, 2190 2191 NL80211_ATTR_CONTROL_PORT, 2192 2193 NL80211_ATTR_TESTDATA, 2194 2195 NL80211_ATTR_PRIVACY, 2196 2197 NL80211_ATTR_DISCONNECTED_BY_AP, 2198 NL80211_ATTR_STATUS_CODE, 2199 2200 NL80211_ATTR_CIPHER_SUITES_PAIRWISE, 2201 NL80211_ATTR_CIPHER_SUITE_GROUP, 2202 NL80211_ATTR_WPA_VERSIONS, 2203 NL80211_ATTR_AKM_SUITES, 2204 2205 NL80211_ATTR_REQ_IE, 2206 NL80211_ATTR_RESP_IE, 2207 2208 NL80211_ATTR_PREV_BSSID, 2209 2210 NL80211_ATTR_KEY, 2211 NL80211_ATTR_KEYS, 2212 2213 NL80211_ATTR_PID, 2214 2215 NL80211_ATTR_4ADDR, 2216 2217 NL80211_ATTR_SURVEY_INFO, 2218 2219 NL80211_ATTR_PMKID, 2220 NL80211_ATTR_MAX_NUM_PMKIDS, 2221 2222 NL80211_ATTR_DURATION, 2223 2224 NL80211_ATTR_COOKIE, 2225 2226 NL80211_ATTR_WIPHY_COVERAGE_CLASS, 2227 2228 NL80211_ATTR_TX_RATES, 2229 2230 NL80211_ATTR_FRAME_MATCH, 2231 2232 NL80211_ATTR_ACK, 2233 2234 NL80211_ATTR_PS_STATE, 2235 2236 NL80211_ATTR_CQM, 2237 2238 NL80211_ATTR_LOCAL_STATE_CHANGE, 2239 2240 NL80211_ATTR_AP_ISOLATE, 2241 2242 NL80211_ATTR_WIPHY_TX_POWER_SETTING, 2243 NL80211_ATTR_WIPHY_TX_POWER_LEVEL, 2244 2245 NL80211_ATTR_TX_FRAME_TYPES, 2246 NL80211_ATTR_RX_FRAME_TYPES, 2247 NL80211_ATTR_FRAME_TYPE, 2248 2249 NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 2250 NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, 2251 2252 NL80211_ATTR_SUPPORT_IBSS_RSN, 2253 2254 NL80211_ATTR_WIPHY_ANTENNA_TX, 2255 NL80211_ATTR_WIPHY_ANTENNA_RX, 2256 2257 NL80211_ATTR_MCAST_RATE, 2258 2259 NL80211_ATTR_OFFCHANNEL_TX_OK, 2260 2261 NL80211_ATTR_BSS_HT_OPMODE, 2262 2263 NL80211_ATTR_KEY_DEFAULT_TYPES, 2264 2265 NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, 2266 2267 NL80211_ATTR_MESH_SETUP, 2268 2269 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, 2270 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, 2271 2272 NL80211_ATTR_SUPPORT_MESH_AUTH, 2273 NL80211_ATTR_STA_PLINK_STATE, 2274 2275 NL80211_ATTR_WOWLAN_TRIGGERS, 2276 NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, 2277 2278 NL80211_ATTR_SCHED_SCAN_INTERVAL, 2279 2280 NL80211_ATTR_INTERFACE_COMBINATIONS, 2281 NL80211_ATTR_SOFTWARE_IFTYPES, 2282 2283 NL80211_ATTR_REKEY_DATA, 2284 2285 NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, 2286 NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, 2287 2288 NL80211_ATTR_SCAN_SUPP_RATES, 2289 2290 NL80211_ATTR_HIDDEN_SSID, 2291 2292 NL80211_ATTR_IE_PROBE_RESP, 2293 NL80211_ATTR_IE_ASSOC_RESP, 2294 2295 NL80211_ATTR_STA_WME, 2296 NL80211_ATTR_SUPPORT_AP_UAPSD, 2297 2298 NL80211_ATTR_ROAM_SUPPORT, 2299 2300 NL80211_ATTR_SCHED_SCAN_MATCH, 2301 NL80211_ATTR_MAX_MATCH_SETS, 2302 2303 NL80211_ATTR_PMKSA_CANDIDATE, 2304 2305 NL80211_ATTR_TX_NO_CCK_RATE, 2306 2307 NL80211_ATTR_TDLS_ACTION, 2308 NL80211_ATTR_TDLS_DIALOG_TOKEN, 2309 NL80211_ATTR_TDLS_OPERATION, 2310 NL80211_ATTR_TDLS_SUPPORT, 2311 NL80211_ATTR_TDLS_EXTERNAL_SETUP, 2312 2313 NL80211_ATTR_DEVICE_AP_SME, 2314 2315 NL80211_ATTR_DONT_WAIT_FOR_ACK, 2316 2317 NL80211_ATTR_FEATURE_FLAGS, 2318 2319 NL80211_ATTR_PROBE_RESP_OFFLOAD, 2320 2321 NL80211_ATTR_PROBE_RESP, 2322 2323 NL80211_ATTR_DFS_REGION, 2324 2325 NL80211_ATTR_DISABLE_HT, 2326 NL80211_ATTR_HT_CAPABILITY_MASK, 2327 2328 NL80211_ATTR_NOACK_MAP, 2329 2330 NL80211_ATTR_INACTIVITY_TIMEOUT, 2331 2332 NL80211_ATTR_RX_SIGNAL_DBM, 2333 2334 NL80211_ATTR_BG_SCAN_PERIOD, 2335 2336 NL80211_ATTR_WDEV, 2337 2338 NL80211_ATTR_USER_REG_HINT_TYPE, 2339 2340 NL80211_ATTR_CONN_FAILED_REASON, 2341 2342 NL80211_ATTR_AUTH_DATA, 2343 2344 NL80211_ATTR_VHT_CAPABILITY, 2345 2346 NL80211_ATTR_SCAN_FLAGS, 2347 2348 NL80211_ATTR_CHANNEL_WIDTH, 2349 NL80211_ATTR_CENTER_FREQ1, 2350 NL80211_ATTR_CENTER_FREQ2, 2351 2352 NL80211_ATTR_P2P_CTWINDOW, 2353 NL80211_ATTR_P2P_OPPPS, 2354 2355 NL80211_ATTR_LOCAL_MESH_POWER_MODE, 2356 2357 NL80211_ATTR_ACL_POLICY, 2358 2359 NL80211_ATTR_MAC_ADDRS, 2360 2361 NL80211_ATTR_MAC_ACL_MAX, 2362 2363 NL80211_ATTR_RADAR_EVENT, 2364 2365 NL80211_ATTR_EXT_CAPA, 2366 NL80211_ATTR_EXT_CAPA_MASK, 2367 2368 NL80211_ATTR_STA_CAPABILITY, 2369 NL80211_ATTR_STA_EXT_CAPABILITY, 2370 2371 NL80211_ATTR_PROTOCOL_FEATURES, 2372 NL80211_ATTR_SPLIT_WIPHY_DUMP, 2373 2374 NL80211_ATTR_DISABLE_VHT, 2375 NL80211_ATTR_VHT_CAPABILITY_MASK, 2376 2377 NL80211_ATTR_MDID, 2378 NL80211_ATTR_IE_RIC, 2379 2380 NL80211_ATTR_CRIT_PROT_ID, 2381 NL80211_ATTR_MAX_CRIT_PROT_DURATION, 2382 2383 NL80211_ATTR_PEER_AID, 2384 2385 NL80211_ATTR_COALESCE_RULE, 2386 2387 NL80211_ATTR_CH_SWITCH_COUNT, 2388 NL80211_ATTR_CH_SWITCH_BLOCK_TX, 2389 NL80211_ATTR_CSA_IES, 2390 NL80211_ATTR_CSA_C_OFF_BEACON, 2391 NL80211_ATTR_CSA_C_OFF_PRESP, 2392 2393 NL80211_ATTR_RXMGMT_FLAGS, 2394 2395 NL80211_ATTR_STA_SUPPORTED_CHANNELS, 2396 2397 NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES, 2398 2399 NL80211_ATTR_HANDLE_DFS, 2400 2401 NL80211_ATTR_SUPPORT_5_MHZ, 2402 NL80211_ATTR_SUPPORT_10_MHZ, 2403 2404 NL80211_ATTR_OPMODE_NOTIF, 2405 2406 NL80211_ATTR_VENDOR_ID, 2407 NL80211_ATTR_VENDOR_SUBCMD, 2408 NL80211_ATTR_VENDOR_DATA, 2409 NL80211_ATTR_VENDOR_EVENTS, 2410 2411 NL80211_ATTR_QOS_MAP, 2412 2413 NL80211_ATTR_MAC_HINT, 2414 NL80211_ATTR_WIPHY_FREQ_HINT, 2415 2416 NL80211_ATTR_MAX_AP_ASSOC_STA, 2417 2418 NL80211_ATTR_TDLS_PEER_CAPABILITY, 2419 2420 NL80211_ATTR_SOCKET_OWNER, 2421 2422 NL80211_ATTR_CSA_C_OFFSETS_TX, 2423 NL80211_ATTR_MAX_CSA_COUNTERS, 2424 2425 NL80211_ATTR_TDLS_INITIATOR, 2426 2427 NL80211_ATTR_USE_RRM, 2428 2429 NL80211_ATTR_WIPHY_DYN_ACK, 2430 2431 NL80211_ATTR_TSID, 2432 NL80211_ATTR_USER_PRIO, 2433 NL80211_ATTR_ADMITTED_TIME, 2434 2435 NL80211_ATTR_SMPS_MODE, 2436 2437 NL80211_ATTR_OPER_CLASS, 2438 2439 NL80211_ATTR_MAC_MASK, 2440 2441 NL80211_ATTR_WIPHY_SELF_MANAGED_REG, 2442 2443 NL80211_ATTR_EXT_FEATURES, 2444 2445 NL80211_ATTR_SURVEY_RADIO_STATS, 2446 2447 NL80211_ATTR_NETNS_FD, 2448 2449 NL80211_ATTR_SCHED_SCAN_DELAY, 2450 2451 NL80211_ATTR_REG_INDOOR, 2452 2453 NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, 2454 NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, 2455 NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, 2456 NL80211_ATTR_SCHED_SCAN_PLANS, 2457 2458 NL80211_ATTR_PBSS, 2459 2460 NL80211_ATTR_BSS_SELECT, 2461 2462 NL80211_ATTR_STA_SUPPORT_P2P_PS, 2463 2464 NL80211_ATTR_PAD, 2465 2466 NL80211_ATTR_IFTYPE_EXT_CAPA, 2467 2468 NL80211_ATTR_MU_MIMO_GROUP_DATA, 2469 NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, 2470 2471 NL80211_ATTR_SCAN_START_TIME_TSF, 2472 NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, 2473 NL80211_ATTR_MEASUREMENT_DURATION, 2474 NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, 2475 2476 NL80211_ATTR_MESH_PEER_AID, 2477 2478 NL80211_ATTR_NAN_MASTER_PREF, 2479 NL80211_ATTR_BANDS, 2480 NL80211_ATTR_NAN_FUNC, 2481 NL80211_ATTR_NAN_MATCH, 2482 2483 NL80211_ATTR_FILS_KEK, 2484 NL80211_ATTR_FILS_NONCES, 2485 2486 NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, 2487 2488 NL80211_ATTR_BSSID, 2489 2490 NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI, 2491 NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST, 2492 2493 NL80211_ATTR_TIMEOUT_REASON, 2494 2495 NL80211_ATTR_FILS_ERP_USERNAME, 2496 NL80211_ATTR_FILS_ERP_REALM, 2497 NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM, 2498 NL80211_ATTR_FILS_ERP_RRK, 2499 NL80211_ATTR_FILS_CACHE_ID, 2500 2501 NL80211_ATTR_PMK, 2502 2503 /* add attributes here, update the policy in nl80211.c */ 2504 2505 __NL80211_ATTR_AFTER_LAST, 2506 NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, 2507 NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 2508 }; 2509 2510 /* source-level API compatibility */ 2511 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION 2512 #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG 2513 #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER 2514 #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA 2515 2516 /* 2517 * Allow user space programs to use #ifdef on new attributes by defining them 2518 * here 2519 */ 2520 #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT 2521 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY 2522 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES 2523 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS 2524 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ 2525 #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE 2526 #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE 2527 #define NL80211_ATTR_IE NL80211_ATTR_IE 2528 #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR 2529 #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE 2530 #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME 2531 #define NL80211_ATTR_SSID NL80211_ATTR_SSID 2532 #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE 2533 #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE 2534 #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE 2535 #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP 2536 #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS 2537 #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES 2538 #define NL80211_ATTR_KEY NL80211_ATTR_KEY 2539 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS 2540 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS 2541 2542 #define NL80211_MAX_SUPP_RATES 32 2543 #define NL80211_MAX_SUPP_HT_RATES 77 2544 #define NL80211_MAX_SUPP_REG_RULES 64 2545 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 2546 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 2547 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 2548 #define NL80211_HT_CAPABILITY_LEN 26 2549 #define NL80211_VHT_CAPABILITY_LEN 12 2550 2551 #define NL80211_MAX_NR_CIPHER_SUITES 5 2552 #define NL80211_MAX_NR_AKM_SUITES 2 2553 2554 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 2555 2556 /* default RSSI threshold for scan results if none specified. */ 2557 #define NL80211_SCAN_RSSI_THOLD_OFF -300 2558 2559 #define NL80211_CQM_TXE_MAX_INTVL 1800 2560 2561 /** 2562 * enum nl80211_iftype - (virtual) interface types 2563 * 2564 * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides 2565 * @NL80211_IFTYPE_ADHOC: independent BSS member 2566 * @NL80211_IFTYPE_STATION: managed BSS member 2567 * @NL80211_IFTYPE_AP: access point 2568 * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces 2569 * are a bit special in that they must always be tied to a pre-existing 2570 * AP type interface. 2571 * @NL80211_IFTYPE_WDS: wireless distribution interface 2572 * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames 2573 * @NL80211_IFTYPE_MESH_POINT: mesh point 2574 * @NL80211_IFTYPE_P2P_CLIENT: P2P client 2575 * @NL80211_IFTYPE_P2P_GO: P2P group owner 2576 * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev 2577 * and therefore can't be created in the normal ways, use the 2578 * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE 2579 * commands to create and destroy one 2580 * @NL80211_IF_TYPE_OCB: Outside Context of a BSS 2581 * This mode corresponds to the MIB variable dot11OCBActivated=true 2582 * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) 2583 * @NL80211_IFTYPE_MAX: highest interface type number currently defined 2584 * @NUM_NL80211_IFTYPES: number of defined interface types 2585 * 2586 * These values are used with the %NL80211_ATTR_IFTYPE 2587 * to set the type of an interface. 2588 * 2589 */ 2590 enum nl80211_iftype { 2591 NL80211_IFTYPE_UNSPECIFIED, 2592 NL80211_IFTYPE_ADHOC, 2593 NL80211_IFTYPE_STATION, 2594 NL80211_IFTYPE_AP, 2595 NL80211_IFTYPE_AP_VLAN, 2596 NL80211_IFTYPE_WDS, 2597 NL80211_IFTYPE_MONITOR, 2598 NL80211_IFTYPE_MESH_POINT, 2599 NL80211_IFTYPE_P2P_CLIENT, 2600 NL80211_IFTYPE_P2P_GO, 2601 NL80211_IFTYPE_P2P_DEVICE, 2602 NL80211_IFTYPE_OCB, 2603 NL80211_IFTYPE_NAN, 2604 2605 /* keep last */ 2606 NUM_NL80211_IFTYPES, 2607 NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 2608 }; 2609 2610 /** 2611 * enum nl80211_sta_flags - station flags 2612 * 2613 * Station flags. When a station is added to an AP interface, it is 2614 * assumed to be already associated (and hence authenticated.) 2615 * 2616 * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved 2617 * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) 2618 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames 2619 * with short barker preamble 2620 * @NL80211_STA_FLAG_WME: station is WME/QoS capable 2621 * @NL80211_STA_FLAG_MFP: station uses management frame protection 2622 * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated 2623 * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should 2624 * only be used in managed mode (even in the flags mask). Note that the 2625 * flag can't be changed, it is only valid while adding a station, and 2626 * attempts to change it will silently be ignored (rather than rejected 2627 * as errors.) 2628 * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers 2629 * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a 2630 * previously added station into associated state 2631 * @NL80211_STA_FLAG_MAX: highest station flag number currently defined 2632 * @__NL80211_STA_FLAG_AFTER_LAST: internal use 2633 */ 2634 enum nl80211_sta_flags { 2635 __NL80211_STA_FLAG_INVALID, 2636 NL80211_STA_FLAG_AUTHORIZED, 2637 NL80211_STA_FLAG_SHORT_PREAMBLE, 2638 NL80211_STA_FLAG_WME, 2639 NL80211_STA_FLAG_MFP, 2640 NL80211_STA_FLAG_AUTHENTICATED, 2641 NL80211_STA_FLAG_TDLS_PEER, 2642 NL80211_STA_FLAG_ASSOCIATED, 2643 2644 /* keep last */ 2645 __NL80211_STA_FLAG_AFTER_LAST, 2646 NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 2647 }; 2648 2649 /** 2650 * enum nl80211_sta_p2p_ps_status - station support of P2P PS 2651 * 2652 * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism 2653 * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism 2654 * @NUM_NL80211_P2P_PS_STATUS: number of values 2655 */ 2656 enum nl80211_sta_p2p_ps_status { 2657 NL80211_P2P_PS_UNSUPPORTED = 0, 2658 NL80211_P2P_PS_SUPPORTED, 2659 2660 NUM_NL80211_P2P_PS_STATUS, 2661 }; 2662 2663 #define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER 2664 2665 /** 2666 * struct nl80211_sta_flag_update - station flags mask/set 2667 * @mask: mask of station flags to set 2668 * @set: which values to set them to 2669 * 2670 * Both mask and set contain bits as per &enum nl80211_sta_flags. 2671 */ 2672 struct nl80211_sta_flag_update { 2673 __u32 mask; 2674 __u32 set; 2675 } __attribute__((packed)); 2676 2677 /** 2678 * enum nl80211_rate_info - bitrate information 2679 * 2680 * These attribute types are used with %NL80211_STA_INFO_TXRATE 2681 * when getting information about the bitrate of a station. 2682 * There are 2 attributes for bitrate, a legacy one that represents 2683 * a 16-bit value, and new one that represents a 32-bit value. 2684 * If the rate value fits into 16 bit, both attributes are reported 2685 * with the same value. If the rate is too high to fit into 16 bits 2686 * (>6.5535Gbps) only 32-bit attribute is included. 2687 * User space tools encouraged to use the 32-bit attribute and fall 2688 * back to the 16-bit one for compatibility with older kernels. 2689 * 2690 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved 2691 * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) 2692 * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) 2693 * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate 2694 * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval 2695 * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) 2696 * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined 2697 * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) 2698 * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) 2699 * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate 2700 * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the 2701 * same as 160 for purposes of the bitrates 2702 * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate 2703 * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is 2704 * a legacy rate and will be reported as the actual bitrate, i.e. 2705 * half the base (20 MHz) rate 2706 * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is 2707 * a legacy rate and will be reported as the actual bitrate, i.e. 2708 * a quarter of the base (20 MHz) rate 2709 * @__NL80211_RATE_INFO_AFTER_LAST: internal use 2710 */ 2711 enum nl80211_rate_info { 2712 __NL80211_RATE_INFO_INVALID, 2713 NL80211_RATE_INFO_BITRATE, 2714 NL80211_RATE_INFO_MCS, 2715 NL80211_RATE_INFO_40_MHZ_WIDTH, 2716 NL80211_RATE_INFO_SHORT_GI, 2717 NL80211_RATE_INFO_BITRATE32, 2718 NL80211_RATE_INFO_VHT_MCS, 2719 NL80211_RATE_INFO_VHT_NSS, 2720 NL80211_RATE_INFO_80_MHZ_WIDTH, 2721 NL80211_RATE_INFO_80P80_MHZ_WIDTH, 2722 NL80211_RATE_INFO_160_MHZ_WIDTH, 2723 NL80211_RATE_INFO_10_MHZ_WIDTH, 2724 NL80211_RATE_INFO_5_MHZ_WIDTH, 2725 2726 /* keep last */ 2727 __NL80211_RATE_INFO_AFTER_LAST, 2728 NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 2729 }; 2730 2731 /** 2732 * enum nl80211_sta_bss_param - BSS information collected by STA 2733 * 2734 * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM 2735 * when getting information about the bitrate of a station. 2736 * 2737 * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved 2738 * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) 2739 * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled 2740 * (flag) 2741 * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled 2742 * (flag) 2743 * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) 2744 * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) 2745 * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined 2746 * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use 2747 */ 2748 enum nl80211_sta_bss_param { 2749 __NL80211_STA_BSS_PARAM_INVALID, 2750 NL80211_STA_BSS_PARAM_CTS_PROT, 2751 NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, 2752 NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, 2753 NL80211_STA_BSS_PARAM_DTIM_PERIOD, 2754 NL80211_STA_BSS_PARAM_BEACON_INTERVAL, 2755 2756 /* keep last */ 2757 __NL80211_STA_BSS_PARAM_AFTER_LAST, 2758 NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 2759 }; 2760 2761 /** 2762 * enum nl80211_sta_info - station information 2763 * 2764 * These attribute types are used with %NL80211_ATTR_STA_INFO 2765 * when getting information about a station. 2766 * 2767 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved 2768 * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) 2769 * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) 2770 * (u32, from this station) 2771 * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) 2772 * (u32, to this station) 2773 * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) 2774 * (u64, from this station) 2775 * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) 2776 * (u64, to this station) 2777 * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) 2778 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute 2779 * containing info as possible, see &enum nl80211_rate_info 2780 * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) 2781 * (u32, from this station) 2782 * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) 2783 * (u32, to this station) 2784 * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) 2785 * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) 2786 * (u32, to this station) 2787 * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) 2788 * @NL80211_STA_INFO_LLID: the station's mesh LLID 2789 * @NL80211_STA_INFO_PLID: the station's mesh PLID 2790 * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station 2791 * (see %enum nl80211_plink_state) 2792 * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested 2793 * attribute, like NL80211_STA_INFO_TX_BITRATE. 2794 * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute 2795 * containing info as possible, see &enum nl80211_sta_bss_param 2796 * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected 2797 * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. 2798 * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) 2799 * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) 2800 * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode 2801 * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode 2802 * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards 2803 * non-peer STA 2804 * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU 2805 * Contains a nested array of signal strength attributes (u8, dBm) 2806 * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average 2807 * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. 2808 * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the 2809 * 802.11 header (u32, kbps) 2810 * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons 2811 * (u64) 2812 * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) 2813 * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average 2814 * for beacons only (u8, dBm) 2815 * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) 2816 * This is a nested attribute where each the inner attribute number is the 2817 * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; 2818 * each one of those is again nested with &enum nl80211_tid_stats 2819 * attributes carrying the actual values. 2820 * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames 2821 * received from the station (u64, usec) 2822 * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment 2823 * @__NL80211_STA_INFO_AFTER_LAST: internal 2824 * @NL80211_STA_INFO_MAX: highest possible station info attribute 2825 */ 2826 enum nl80211_sta_info { 2827 __NL80211_STA_INFO_INVALID, 2828 NL80211_STA_INFO_INACTIVE_TIME, 2829 NL80211_STA_INFO_RX_BYTES, 2830 NL80211_STA_INFO_TX_BYTES, 2831 NL80211_STA_INFO_LLID, 2832 NL80211_STA_INFO_PLID, 2833 NL80211_STA_INFO_PLINK_STATE, 2834 NL80211_STA_INFO_SIGNAL, 2835 NL80211_STA_INFO_TX_BITRATE, 2836 NL80211_STA_INFO_RX_PACKETS, 2837 NL80211_STA_INFO_TX_PACKETS, 2838 NL80211_STA_INFO_TX_RETRIES, 2839 NL80211_STA_INFO_TX_FAILED, 2840 NL80211_STA_INFO_SIGNAL_AVG, 2841 NL80211_STA_INFO_RX_BITRATE, 2842 NL80211_STA_INFO_BSS_PARAM, 2843 NL80211_STA_INFO_CONNECTED_TIME, 2844 NL80211_STA_INFO_STA_FLAGS, 2845 NL80211_STA_INFO_BEACON_LOSS, 2846 NL80211_STA_INFO_T_OFFSET, 2847 NL80211_STA_INFO_LOCAL_PM, 2848 NL80211_STA_INFO_PEER_PM, 2849 NL80211_STA_INFO_NONPEER_PM, 2850 NL80211_STA_INFO_RX_BYTES64, 2851 NL80211_STA_INFO_TX_BYTES64, 2852 NL80211_STA_INFO_CHAIN_SIGNAL, 2853 NL80211_STA_INFO_CHAIN_SIGNAL_AVG, 2854 NL80211_STA_INFO_EXPECTED_THROUGHPUT, 2855 NL80211_STA_INFO_RX_DROP_MISC, 2856 NL80211_STA_INFO_BEACON_RX, 2857 NL80211_STA_INFO_BEACON_SIGNAL_AVG, 2858 NL80211_STA_INFO_TID_STATS, 2859 NL80211_STA_INFO_RX_DURATION, 2860 NL80211_STA_INFO_PAD, 2861 2862 /* keep last */ 2863 __NL80211_STA_INFO_AFTER_LAST, 2864 NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 2865 }; 2866 2867 /** 2868 * enum nl80211_tid_stats - per TID statistics attributes 2869 * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved 2870 * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) 2871 * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or 2872 * attempted to transmit; u64) 2873 * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for 2874 * transmitted MSDUs (not counting the first attempt; u64) 2875 * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted 2876 * MSDUs (u64) 2877 * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment 2878 * @NUM_NL80211_TID_STATS: number of attributes here 2879 * @NL80211_TID_STATS_MAX: highest numbered attribute here 2880 */ 2881 enum nl80211_tid_stats { 2882 __NL80211_TID_STATS_INVALID, 2883 NL80211_TID_STATS_RX_MSDU, 2884 NL80211_TID_STATS_TX_MSDU, 2885 NL80211_TID_STATS_TX_MSDU_RETRIES, 2886 NL80211_TID_STATS_TX_MSDU_FAILED, 2887 NL80211_TID_STATS_PAD, 2888 2889 /* keep last */ 2890 NUM_NL80211_TID_STATS, 2891 NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 2892 }; 2893 2894 /** 2895 * enum nl80211_mpath_flags - nl80211 mesh path flags 2896 * 2897 * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active 2898 * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running 2899 * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN 2900 * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set 2901 * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded 2902 */ 2903 enum nl80211_mpath_flags { 2904 NL80211_MPATH_FLAG_ACTIVE = 1<<0, 2905 NL80211_MPATH_FLAG_RESOLVING = 1<<1, 2906 NL80211_MPATH_FLAG_SN_VALID = 1<<2, 2907 NL80211_MPATH_FLAG_FIXED = 1<<3, 2908 NL80211_MPATH_FLAG_RESOLVED = 1<<4, 2909 }; 2910 2911 /** 2912 * enum nl80211_mpath_info - mesh path information 2913 * 2914 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting 2915 * information about a mesh path. 2916 * 2917 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved 2918 * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination 2919 * @NL80211_MPATH_INFO_SN: destination sequence number 2920 * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path 2921 * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now 2922 * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in 2923 * &enum nl80211_mpath_flags; 2924 * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec 2925 * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries 2926 * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number 2927 * currently defind 2928 * @__NL80211_MPATH_INFO_AFTER_LAST: internal use 2929 */ 2930 enum nl80211_mpath_info { 2931 __NL80211_MPATH_INFO_INVALID, 2932 NL80211_MPATH_INFO_FRAME_QLEN, 2933 NL80211_MPATH_INFO_SN, 2934 NL80211_MPATH_INFO_METRIC, 2935 NL80211_MPATH_INFO_EXPTIME, 2936 NL80211_MPATH_INFO_FLAGS, 2937 NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, 2938 NL80211_MPATH_INFO_DISCOVERY_RETRIES, 2939 2940 /* keep last */ 2941 __NL80211_MPATH_INFO_AFTER_LAST, 2942 NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 2943 }; 2944 2945 /** 2946 * enum nl80211_band_attr - band attributes 2947 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved 2948 * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, 2949 * an array of nested frequency attributes 2950 * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, 2951 * an array of nested bitrate attributes 2952 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as 2953 * defined in 802.11n 2954 * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE 2955 * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n 2956 * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n 2957 * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as 2958 * defined in 802.11ac 2959 * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE 2960 * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined 2961 * @__NL80211_BAND_ATTR_AFTER_LAST: internal use 2962 */ 2963 enum nl80211_band_attr { 2964 __NL80211_BAND_ATTR_INVALID, 2965 NL80211_BAND_ATTR_FREQS, 2966 NL80211_BAND_ATTR_RATES, 2967 2968 NL80211_BAND_ATTR_HT_MCS_SET, 2969 NL80211_BAND_ATTR_HT_CAPA, 2970 NL80211_BAND_ATTR_HT_AMPDU_FACTOR, 2971 NL80211_BAND_ATTR_HT_AMPDU_DENSITY, 2972 2973 NL80211_BAND_ATTR_VHT_MCS_SET, 2974 NL80211_BAND_ATTR_VHT_CAPA, 2975 2976 /* keep last */ 2977 __NL80211_BAND_ATTR_AFTER_LAST, 2978 NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 2979 }; 2980 2981 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA 2982 2983 /** 2984 * enum nl80211_frequency_attr - frequency attributes 2985 * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved 2986 * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz 2987 * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current 2988 * regulatory domain. 2989 * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation 2990 * are permitted on this channel, this includes sending probe 2991 * requests, or modes of operation that require beaconing. 2992 * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory 2993 * on this channel in current regulatory domain. 2994 * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm 2995 * (100 * dBm). 2996 * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS 2997 * (enum nl80211_dfs_state) 2998 * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long 2999 * this channel is in this DFS state. 3000 * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this 3001 * channel as the control channel 3002 * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this 3003 * channel as the control channel 3004 * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel 3005 * as the primary or any of the secondary channels isn't possible, 3006 * this includes 80+80 channels 3007 * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel 3008 * using this channel as the primary or any of the secondary channels 3009 * isn't possible 3010 * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. 3011 * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this 3012 * channel. A channel that has the INDOOR_ONLY attribute can only be 3013 * used when there is a clear assessment that the device is operating in 3014 * an indoor surroundings, i.e., it is connected to AC power (and not 3015 * through portable DC inverters) or is under the control of a master 3016 * that is acting as an AP and is connected to AC power. 3017 * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this 3018 * channel if it's connected concurrently to a BSS on the same channel on 3019 * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz 3020 * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS 3021 * off-channel on a channel that has the IR_CONCURRENT attribute set can be 3022 * done when there is a clear assessment that the device is operating under 3023 * the guidance of an authorized master, i.e., setting up a GO or TDLS 3024 * off-channel while the device is also connected to an AP with DFS and 3025 * radar detection on the UNII band (it is up to user-space, i.e., 3026 * wpa_supplicant to perform the required verifications). Using this 3027 * attribute for IR is disallowed for master interfaces (IBSS, AP). 3028 * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed 3029 * on this channel in current regulatory domain. 3030 * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed 3031 * on this channel in current regulatory domain. 3032 * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number 3033 * currently defined 3034 * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use 3035 * 3036 * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 3037 * for more information on the FCC description of the relaxations allowed 3038 * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and 3039 * NL80211_FREQUENCY_ATTR_IR_CONCURRENT. 3040 */ 3041 enum nl80211_frequency_attr { 3042 __NL80211_FREQUENCY_ATTR_INVALID, 3043 NL80211_FREQUENCY_ATTR_FREQ, 3044 NL80211_FREQUENCY_ATTR_DISABLED, 3045 NL80211_FREQUENCY_ATTR_NO_IR, 3046 __NL80211_FREQUENCY_ATTR_NO_IBSS, 3047 NL80211_FREQUENCY_ATTR_RADAR, 3048 NL80211_FREQUENCY_ATTR_MAX_TX_POWER, 3049 NL80211_FREQUENCY_ATTR_DFS_STATE, 3050 NL80211_FREQUENCY_ATTR_DFS_TIME, 3051 NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, 3052 NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, 3053 NL80211_FREQUENCY_ATTR_NO_80MHZ, 3054 NL80211_FREQUENCY_ATTR_NO_160MHZ, 3055 NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, 3056 NL80211_FREQUENCY_ATTR_INDOOR_ONLY, 3057 NL80211_FREQUENCY_ATTR_IR_CONCURRENT, 3058 NL80211_FREQUENCY_ATTR_NO_20MHZ, 3059 NL80211_FREQUENCY_ATTR_NO_10MHZ, 3060 3061 /* keep last */ 3062 __NL80211_FREQUENCY_ATTR_AFTER_LAST, 3063 NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 3064 }; 3065 3066 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER 3067 #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR 3068 #define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR 3069 #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR 3070 #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ 3071 NL80211_FREQUENCY_ATTR_IR_CONCURRENT 3072 3073 /** 3074 * enum nl80211_bitrate_attr - bitrate attributes 3075 * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved 3076 * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps 3077 * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported 3078 * in 2.4 GHz band. 3079 * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number 3080 * currently defined 3081 * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use 3082 */ 3083 enum nl80211_bitrate_attr { 3084 __NL80211_BITRATE_ATTR_INVALID, 3085 NL80211_BITRATE_ATTR_RATE, 3086 NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, 3087 3088 /* keep last */ 3089 __NL80211_BITRATE_ATTR_AFTER_LAST, 3090 NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 3091 }; 3092 3093 /** 3094 * enum nl80211_initiator - Indicates the initiator of a reg domain request 3095 * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world 3096 * regulatory domain. 3097 * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the 3098 * regulatory domain. 3099 * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the 3100 * wireless core it thinks its knows the regulatory domain we should be in. 3101 * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an 3102 * 802.11 country information element with regulatory information it 3103 * thinks we should consider. cfg80211 only processes the country 3104 * code from the IE, and relies on the regulatory domain information 3105 * structure passed by userspace (CRDA) from our wireless-regdb. 3106 * If a channel is enabled but the country code indicates it should 3107 * be disabled we disable the channel and re-enable it upon disassociation. 3108 */ 3109 enum nl80211_reg_initiator { 3110 NL80211_REGDOM_SET_BY_CORE, 3111 NL80211_REGDOM_SET_BY_USER, 3112 NL80211_REGDOM_SET_BY_DRIVER, 3113 NL80211_REGDOM_SET_BY_COUNTRY_IE, 3114 }; 3115 3116 /** 3117 * enum nl80211_reg_type - specifies the type of regulatory domain 3118 * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains 3119 * to a specific country. When this is set you can count on the 3120 * ISO / IEC 3166 alpha2 country code being valid. 3121 * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory 3122 * domain. 3123 * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom 3124 * driver specific world regulatory domain. These do not apply system-wide 3125 * and are only applicable to the individual devices which have requested 3126 * them to be applied. 3127 * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product 3128 * of an intersection between two regulatory domains -- the previously 3129 * set regulatory domain on the system and the last accepted regulatory 3130 * domain request to be processed. 3131 */ 3132 enum nl80211_reg_type { 3133 NL80211_REGDOM_TYPE_COUNTRY, 3134 NL80211_REGDOM_TYPE_WORLD, 3135 NL80211_REGDOM_TYPE_CUSTOM_WORLD, 3136 NL80211_REGDOM_TYPE_INTERSECTION, 3137 }; 3138 3139 /** 3140 * enum nl80211_reg_rule_attr - regulatory rule attributes 3141 * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved 3142 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional 3143 * considerations for a given frequency range. These are the 3144 * &enum nl80211_reg_rule_flags. 3145 * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory 3146 * rule in KHz. This is not a center of frequency but an actual regulatory 3147 * band edge. 3148 * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule 3149 * in KHz. This is not a center a frequency but an actual regulatory 3150 * band edge. 3151 * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this 3152 * frequency range, in KHz. 3153 * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain 3154 * for a given frequency range. The value is in mBi (100 * dBi). 3155 * If you don't have one then don't send this. 3156 * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for 3157 * a given frequency range. The value is in mBm (100 * dBm). 3158 * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. 3159 * If not present or 0 default CAC time will be used. 3160 * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number 3161 * currently defined 3162 * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use 3163 */ 3164 enum nl80211_reg_rule_attr { 3165 __NL80211_REG_RULE_ATTR_INVALID, 3166 NL80211_ATTR_REG_RULE_FLAGS, 3167 3168 NL80211_ATTR_FREQ_RANGE_START, 3169 NL80211_ATTR_FREQ_RANGE_END, 3170 NL80211_ATTR_FREQ_RANGE_MAX_BW, 3171 3172 NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, 3173 NL80211_ATTR_POWER_RULE_MAX_EIRP, 3174 3175 NL80211_ATTR_DFS_CAC_TIME, 3176 3177 /* keep last */ 3178 __NL80211_REG_RULE_ATTR_AFTER_LAST, 3179 NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 3180 }; 3181 3182 /** 3183 * enum nl80211_sched_scan_match_attr - scheduled scan match attributes 3184 * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved 3185 * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, 3186 * only report BSS with matching SSID. 3187 * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a 3188 * BSS in scan results. Filtering is turned off if not specified. Note that 3189 * if this attribute is in a match set of its own, then it is treated as 3190 * the default value for all matchsets with an SSID, rather than being a 3191 * matchset of its own without an RSSI filter. This is due to problems with 3192 * how this API was implemented in the past. Also, due to the same problem, 3193 * the only way to create a matchset with only an RSSI filter (with this 3194 * attribute) is if there's only a single matchset with the RSSI attribute. 3195 * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether 3196 * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or 3197 * relative to current bss's RSSI. 3198 * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for 3199 * BSS-es in the specified band is to be adjusted before doing 3200 * RSSI-based BSS selection. The attribute value is a packed structure 3201 * value as specified by &struct nl80211_bss_select_rssi_adjust. 3202 * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter 3203 * attribute number currently defined 3204 * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use 3205 */ 3206 enum nl80211_sched_scan_match_attr { 3207 __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, 3208 3209 NL80211_SCHED_SCAN_MATCH_ATTR_SSID, 3210 NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, 3211 NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, 3212 NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, 3213 3214 /* keep last */ 3215 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, 3216 NL80211_SCHED_SCAN_MATCH_ATTR_MAX = 3217 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 3218 }; 3219 3220 /* only for backward compatibility */ 3221 #define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID 3222 3223 /** 3224 * enum nl80211_reg_rule_flags - regulatory rule flags 3225 * 3226 * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed 3227 * @NL80211_RRF_NO_CCK: CCK modulation not allowed 3228 * @NL80211_RRF_NO_INDOOR: indoor operation not allowed 3229 * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed 3230 * @NL80211_RRF_DFS: DFS support is required to be used 3231 * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links 3232 * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links 3233 * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, 3234 * this includes probe requests or modes of operation that require 3235 * beaconing. 3236 * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated 3237 * base on contiguous rules and wider channels will be allowed to cross 3238 * multiple contiguous/overlapping frequency ranges. 3239 * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT 3240 * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation 3241 * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation 3242 * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed 3243 * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed 3244 */ 3245 enum nl80211_reg_rule_flags { 3246 NL80211_RRF_NO_OFDM = 1<<0, 3247 NL80211_RRF_NO_CCK = 1<<1, 3248 NL80211_RRF_NO_INDOOR = 1<<2, 3249 NL80211_RRF_NO_OUTDOOR = 1<<3, 3250 NL80211_RRF_DFS = 1<<4, 3251 NL80211_RRF_PTP_ONLY = 1<<5, 3252 NL80211_RRF_PTMP_ONLY = 1<<6, 3253 NL80211_RRF_NO_IR = 1<<7, 3254 __NL80211_RRF_NO_IBSS = 1<<8, 3255 NL80211_RRF_AUTO_BW = 1<<11, 3256 NL80211_RRF_IR_CONCURRENT = 1<<12, 3257 NL80211_RRF_NO_HT40MINUS = 1<<13, 3258 NL80211_RRF_NO_HT40PLUS = 1<<14, 3259 NL80211_RRF_NO_80MHZ = 1<<15, 3260 NL80211_RRF_NO_160MHZ = 1<<16, 3261 }; 3262 3263 #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR 3264 #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR 3265 #define NL80211_RRF_NO_IR NL80211_RRF_NO_IR 3266 #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ 3267 NL80211_RRF_NO_HT40PLUS) 3268 #define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT 3269 3270 /* For backport compatibility with older userspace */ 3271 #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) 3272 3273 /** 3274 * enum nl80211_dfs_regions - regulatory DFS regions 3275 * 3276 * @NL80211_DFS_UNSET: Country has no DFS master region specified 3277 * @NL80211_DFS_FCC: Country follows DFS master rules from FCC 3278 * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI 3279 * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec 3280 */ 3281 enum nl80211_dfs_regions { 3282 NL80211_DFS_UNSET = 0, 3283 NL80211_DFS_FCC = 1, 3284 NL80211_DFS_ETSI = 2, 3285 NL80211_DFS_JP = 3, 3286 }; 3287 3288 /** 3289 * enum nl80211_user_reg_hint_type - type of user regulatory hint 3290 * 3291 * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always 3292 * assumed if the attribute is not set. 3293 * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular 3294 * base station. Device drivers that have been tested to work 3295 * properly to support this type of hint can enable these hints 3296 * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature 3297 * capability on the struct wiphy. The wireless core will 3298 * ignore all cell base station hints until at least one device 3299 * present has been registered with the wireless core that 3300 * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a 3301 * supported feature. 3302 * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the 3303 * platform is operating in an indoor environment. 3304 */ 3305 enum nl80211_user_reg_hint_type { 3306 NL80211_USER_REG_HINT_USER = 0, 3307 NL80211_USER_REG_HINT_CELL_BASE = 1, 3308 NL80211_USER_REG_HINT_INDOOR = 2, 3309 }; 3310 3311 /** 3312 * enum nl80211_survey_info - survey information 3313 * 3314 * These attribute types are used with %NL80211_ATTR_SURVEY_INFO 3315 * when getting information about a survey. 3316 * 3317 * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved 3318 * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel 3319 * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) 3320 * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used 3321 * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio 3322 * was turned on (on channel or globally) 3323 * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary 3324 * channel was sensed busy (either due to activity or energy detect) 3325 * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension 3326 * channel was sensed busy 3327 * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent 3328 * receiving data (on channel or globally) 3329 * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent 3330 * transmitting data (on channel or globally) 3331 * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan 3332 * (on this channel or globally) 3333 * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment 3334 * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number 3335 * currently defined 3336 * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use 3337 */ 3338 enum nl80211_survey_info { 3339 __NL80211_SURVEY_INFO_INVALID, 3340 NL80211_SURVEY_INFO_FREQUENCY, 3341 NL80211_SURVEY_INFO_NOISE, 3342 NL80211_SURVEY_INFO_IN_USE, 3343 NL80211_SURVEY_INFO_TIME, 3344 NL80211_SURVEY_INFO_TIME_BUSY, 3345 NL80211_SURVEY_INFO_TIME_EXT_BUSY, 3346 NL80211_SURVEY_INFO_TIME_RX, 3347 NL80211_SURVEY_INFO_TIME_TX, 3348 NL80211_SURVEY_INFO_TIME_SCAN, 3349 NL80211_SURVEY_INFO_PAD, 3350 3351 /* keep last */ 3352 __NL80211_SURVEY_INFO_AFTER_LAST, 3353 NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 3354 }; 3355 3356 /* keep old names for compatibility */ 3357 #define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME 3358 #define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY 3359 #define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY 3360 #define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX 3361 #define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX 3362 3363 /** 3364 * enum nl80211_mntr_flags - monitor configuration flags 3365 * 3366 * Monitor configuration flags. 3367 * 3368 * @__NL80211_MNTR_FLAG_INVALID: reserved 3369 * 3370 * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS 3371 * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP 3372 * @NL80211_MNTR_FLAG_CONTROL: pass control frames 3373 * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering 3374 * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. 3375 * overrides all other flags. 3376 * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address 3377 * and ACK incoming unicast packets. 3378 * 3379 * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use 3380 * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag 3381 */ 3382 enum nl80211_mntr_flags { 3383 __NL80211_MNTR_FLAG_INVALID, 3384 NL80211_MNTR_FLAG_FCSFAIL, 3385 NL80211_MNTR_FLAG_PLCPFAIL, 3386 NL80211_MNTR_FLAG_CONTROL, 3387 NL80211_MNTR_FLAG_OTHER_BSS, 3388 NL80211_MNTR_FLAG_COOK_FRAMES, 3389 NL80211_MNTR_FLAG_ACTIVE, 3390 3391 /* keep last */ 3392 __NL80211_MNTR_FLAG_AFTER_LAST, 3393 NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 3394 }; 3395 3396 /** 3397 * enum nl80211_mesh_power_mode - mesh power save modes 3398 * 3399 * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is 3400 * not known or has not been set yet. 3401 * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is 3402 * in Awake state all the time. 3403 * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will 3404 * alternate between Active and Doze states, but will wake up for 3405 * neighbor's beacons. 3406 * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will 3407 * alternate between Active and Doze states, but may not wake up 3408 * for neighbor's beacons. 3409 * 3410 * @__NL80211_MESH_POWER_AFTER_LAST - internal use 3411 * @NL80211_MESH_POWER_MAX - highest possible power save level 3412 */ 3413 3414 enum nl80211_mesh_power_mode { 3415 NL80211_MESH_POWER_UNKNOWN, 3416 NL80211_MESH_POWER_ACTIVE, 3417 NL80211_MESH_POWER_LIGHT_SLEEP, 3418 NL80211_MESH_POWER_DEEP_SLEEP, 3419 3420 __NL80211_MESH_POWER_AFTER_LAST, 3421 NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 3422 }; 3423 3424 /** 3425 * enum nl80211_meshconf_params - mesh configuration parameters 3426 * 3427 * Mesh configuration parameters. These can be changed while the mesh is 3428 * active. 3429 * 3430 * @__NL80211_MESHCONF_INVALID: internal use 3431 * 3432 * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in 3433 * millisecond units, used by the Peer Link Open message 3434 * 3435 * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in 3436 * millisecond units, used by the peer link management to close a peer link 3437 * 3438 * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in 3439 * millisecond units 3440 * 3441 * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed 3442 * on this mesh interface 3443 * 3444 * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link 3445 * open retries that can be sent to establish a new peer link instance in a 3446 * mesh 3447 * 3448 * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh 3449 * point. 3450 * 3451 * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open 3452 * peer links when we detect compatible mesh peers. Disabled if 3453 * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are 3454 * set. 3455 * 3456 * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames 3457 * containing a PREQ that an MP can send to a particular destination (path 3458 * target) 3459 * 3460 * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths 3461 * (in milliseconds) 3462 * 3463 * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait 3464 * until giving up on a path discovery (in milliseconds) 3465 * 3466 * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh 3467 * points receiving a PREQ shall consider the forwarding information from 3468 * the root to be valid. (TU = time unit) 3469 * 3470 * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in 3471 * TUs) during which an MP can send only one action frame containing a PREQ 3472 * reference element 3473 * 3474 * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) 3475 * that it takes for an HWMP information element to propagate across the 3476 * mesh 3477 * 3478 * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not 3479 * 3480 * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a 3481 * source mesh point for path selection elements. 3482 * 3483 * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between 3484 * root announcements are transmitted. 3485 * 3486 * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has 3487 * access to a broader network beyond the MBSS. This is done via Root 3488 * Announcement frames. 3489 * 3490 * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in 3491 * TUs) during which a mesh STA can send only one Action frame containing a 3492 * PERR element. 3493 * 3494 * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding 3495 * or forwarding entity (default is TRUE - forwarding entity) 3496 * 3497 * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the 3498 * threshold for average signal strength of candidate station to establish 3499 * a peer link. 3500 * 3501 * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors 3502 * to synchronize to for 11s default synchronization method 3503 * (see 11C.12.2.2) 3504 * 3505 * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. 3506 * 3507 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute 3508 * 3509 * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for 3510 * which mesh STAs receiving a proactive PREQ shall consider the forwarding 3511 * information to the root mesh STA to be valid. 3512 * 3513 * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between 3514 * proactive PREQs are transmitted. 3515 * 3516 * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time 3517 * (in TUs) during which a mesh STA can send only one Action frame 3518 * containing a PREQ element for root path confirmation. 3519 * 3520 * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. 3521 * type &enum nl80211_mesh_power_mode (u32) 3522 * 3523 * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) 3524 * 3525 * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've 3526 * established peering with for longer than this time (in seconds), then 3527 * remove it from the STA's list of peers. You may set this to 0 to disable 3528 * the removal of the STA. Default is 30 minutes. 3529 * 3530 * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use 3531 */ 3532 enum nl80211_meshconf_params { 3533 __NL80211_MESHCONF_INVALID, 3534 NL80211_MESHCONF_RETRY_TIMEOUT, 3535 NL80211_MESHCONF_CONFIRM_TIMEOUT, 3536 NL80211_MESHCONF_HOLDING_TIMEOUT, 3537 NL80211_MESHCONF_MAX_PEER_LINKS, 3538 NL80211_MESHCONF_MAX_RETRIES, 3539 NL80211_MESHCONF_TTL, 3540 NL80211_MESHCONF_AUTO_OPEN_PLINKS, 3541 NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, 3542 NL80211_MESHCONF_PATH_REFRESH_TIME, 3543 NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, 3544 NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, 3545 NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, 3546 NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, 3547 NL80211_MESHCONF_HWMP_ROOTMODE, 3548 NL80211_MESHCONF_ELEMENT_TTL, 3549 NL80211_MESHCONF_HWMP_RANN_INTERVAL, 3550 NL80211_MESHCONF_GATE_ANNOUNCEMENTS, 3551 NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, 3552 NL80211_MESHCONF_FORWARDING, 3553 NL80211_MESHCONF_RSSI_THRESHOLD, 3554 NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, 3555 NL80211_MESHCONF_HT_OPMODE, 3556 NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, 3557 NL80211_MESHCONF_HWMP_ROOT_INTERVAL, 3558 NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, 3559 NL80211_MESHCONF_POWER_MODE, 3560 NL80211_MESHCONF_AWAKE_WINDOW, 3561 NL80211_MESHCONF_PLINK_TIMEOUT, 3562 3563 /* keep last */ 3564 __NL80211_MESHCONF_ATTR_AFTER_LAST, 3565 NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 3566 }; 3567 3568 /** 3569 * enum nl80211_mesh_setup_params - mesh setup parameters 3570 * 3571 * Mesh setup parameters. These are used to start/join a mesh and cannot be 3572 * changed while the mesh is active. 3573 * 3574 * @__NL80211_MESH_SETUP_INVALID: Internal use 3575 * 3576 * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a 3577 * vendor specific path selection algorithm or disable it to use the 3578 * default HWMP. 3579 * 3580 * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a 3581 * vendor specific path metric or disable it to use the default Airtime 3582 * metric. 3583 * 3584 * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a 3585 * robust security network ie, or a vendor specific information element 3586 * that vendors will use to identify the path selection methods and 3587 * metrics in use. 3588 * 3589 * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication 3590 * daemon will be authenticating mesh candidates. 3591 * 3592 * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication 3593 * daemon will be securing peer link frames. AMPE is a secured version of 3594 * Mesh Peering Management (MPM) and is implemented with the assistance of 3595 * a userspace daemon. When this flag is set, the kernel will send peer 3596 * management frames to a userspace daemon that will implement AMPE 3597 * functionality (security capabilities selection, key confirmation, and 3598 * key management). When the flag is unset (default), the kernel can 3599 * autonomously complete (unsecured) mesh peering without the need of a 3600 * userspace daemon. 3601 * 3602 * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a 3603 * vendor specific synchronization method or disable it to use the default 3604 * neighbor offset synchronization 3605 * 3606 * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will 3607 * implement an MPM which handles peer allocation and state. 3608 * 3609 * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication 3610 * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). 3611 * Default is no authentication method required. 3612 * 3613 * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number 3614 * 3615 * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use 3616 */ 3617 enum nl80211_mesh_setup_params { 3618 __NL80211_MESH_SETUP_INVALID, 3619 NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, 3620 NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, 3621 NL80211_MESH_SETUP_IE, 3622 NL80211_MESH_SETUP_USERSPACE_AUTH, 3623 NL80211_MESH_SETUP_USERSPACE_AMPE, 3624 NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, 3625 NL80211_MESH_SETUP_USERSPACE_MPM, 3626 NL80211_MESH_SETUP_AUTH_PROTOCOL, 3627 3628 /* keep last */ 3629 __NL80211_MESH_SETUP_ATTR_AFTER_LAST, 3630 NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 3631 }; 3632 3633 /** 3634 * enum nl80211_txq_attr - TX queue parameter attributes 3635 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved 3636 * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) 3637 * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning 3638 * disabled 3639 * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form 3640 * 2^n-1 in the range 1..32767] 3641 * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form 3642 * 2^n-1 in the range 1..32767] 3643 * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] 3644 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal 3645 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number 3646 */ 3647 enum nl80211_txq_attr { 3648 __NL80211_TXQ_ATTR_INVALID, 3649 NL80211_TXQ_ATTR_AC, 3650 NL80211_TXQ_ATTR_TXOP, 3651 NL80211_TXQ_ATTR_CWMIN, 3652 NL80211_TXQ_ATTR_CWMAX, 3653 NL80211_TXQ_ATTR_AIFS, 3654 3655 /* keep last */ 3656 __NL80211_TXQ_ATTR_AFTER_LAST, 3657 NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 3658 }; 3659 3660 enum nl80211_ac { 3661 NL80211_AC_VO, 3662 NL80211_AC_VI, 3663 NL80211_AC_BE, 3664 NL80211_AC_BK, 3665 NL80211_NUM_ACS 3666 }; 3667 3668 /* backward compat */ 3669 #define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC 3670 #define NL80211_TXQ_Q_VO NL80211_AC_VO 3671 #define NL80211_TXQ_Q_VI NL80211_AC_VI 3672 #define NL80211_TXQ_Q_BE NL80211_AC_BE 3673 #define NL80211_TXQ_Q_BK NL80211_AC_BK 3674 3675 /** 3676 * enum nl80211_channel_type - channel type 3677 * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel 3678 * @NL80211_CHAN_HT20: 20 MHz HT channel 3679 * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel 3680 * below the control channel 3681 * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel 3682 * above the control channel 3683 */ 3684 enum nl80211_channel_type { 3685 NL80211_CHAN_NO_HT, 3686 NL80211_CHAN_HT20, 3687 NL80211_CHAN_HT40MINUS, 3688 NL80211_CHAN_HT40PLUS 3689 }; 3690 3691 /** 3692 * enum nl80211_chan_width - channel width definitions 3693 * 3694 * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH 3695 * attribute. 3696 * 3697 * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel 3698 * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel 3699 * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 3700 * attribute must be provided as well 3701 * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 3702 * attribute must be provided as well 3703 * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 3704 * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well 3705 * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 3706 * attribute must be provided as well 3707 * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel 3708 * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel 3709 */ 3710 enum nl80211_chan_width { 3711 NL80211_CHAN_WIDTH_20_NOHT, 3712 NL80211_CHAN_WIDTH_20, 3713 NL80211_CHAN_WIDTH_40, 3714 NL80211_CHAN_WIDTH_80, 3715 NL80211_CHAN_WIDTH_80P80, 3716 NL80211_CHAN_WIDTH_160, 3717 NL80211_CHAN_WIDTH_5, 3718 NL80211_CHAN_WIDTH_10, 3719 }; 3720 3721 /** 3722 * enum nl80211_bss_scan_width - control channel width for a BSS 3723 * 3724 * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. 3725 * 3726 * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible 3727 * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide 3728 * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide 3729 */ 3730 enum nl80211_bss_scan_width { 3731 NL80211_BSS_CHAN_WIDTH_20, 3732 NL80211_BSS_CHAN_WIDTH_10, 3733 NL80211_BSS_CHAN_WIDTH_5, 3734 }; 3735 3736 /** 3737 * enum nl80211_bss - netlink attributes for a BSS 3738 * 3739 * @__NL80211_BSS_INVALID: invalid 3740 * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) 3741 * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) 3742 * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) 3743 * (if @NL80211_BSS_PRESP_DATA is present then this is known to be 3744 * from a probe response, otherwise it may be from the same beacon 3745 * that the NL80211_BSS_BEACON_TSF will be from) 3746 * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) 3747 * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) 3748 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the 3749 * raw information elements from the probe response/beacon (bin); 3750 * if the %NL80211_BSS_BEACON_IES attribute is present and the data is 3751 * different then the IEs here are from a Probe Response frame; otherwise 3752 * they are from a Beacon frame. 3753 * However, if the driver does not indicate the source of the IEs, these 3754 * IEs may be from either frame subtype. 3755 * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the 3756 * data here is known to be from a probe response, without any heuristics. 3757 * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon 3758 * in mBm (100 * dBm) (s32) 3759 * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon 3760 * in unspecified units, scaled to 0..100 (u8) 3761 * @NL80211_BSS_STATUS: status, if this BSS is "used" 3762 * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms 3763 * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information 3764 * elements from a Beacon frame (bin); not present if no Beacon frame has 3765 * yet been received 3766 * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel 3767 * (u32, enum nl80211_bss_scan_width) 3768 * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) 3769 * (not present if no beacon frame has been received yet) 3770 * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and 3771 * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) 3772 * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry 3773 * was last updated by a received frame. The value is expected to be 3774 * accurate to about 10ms. (u64, nanoseconds) 3775 * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment 3776 * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first 3777 * octet of the timestamp field of the last beacon/probe received for 3778 * this BSS. The time is the TSF of the BSS specified by 3779 * @NL80211_BSS_PARENT_BSSID. (u64). 3780 * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF 3781 * is set. 3782 * @__NL80211_BSS_AFTER_LAST: internal 3783 * @NL80211_BSS_MAX: highest BSS attribute 3784 */ 3785 enum nl80211_bss { 3786 __NL80211_BSS_INVALID, 3787 NL80211_BSS_BSSID, 3788 NL80211_BSS_FREQUENCY, 3789 NL80211_BSS_TSF, 3790 NL80211_BSS_BEACON_INTERVAL, 3791 NL80211_BSS_CAPABILITY, 3792 NL80211_BSS_INFORMATION_ELEMENTS, 3793 NL80211_BSS_SIGNAL_MBM, 3794 NL80211_BSS_SIGNAL_UNSPEC, 3795 NL80211_BSS_STATUS, 3796 NL80211_BSS_SEEN_MS_AGO, 3797 NL80211_BSS_BEACON_IES, 3798 NL80211_BSS_CHAN_WIDTH, 3799 NL80211_BSS_BEACON_TSF, 3800 NL80211_BSS_PRESP_DATA, 3801 NL80211_BSS_LAST_SEEN_BOOTTIME, 3802 NL80211_BSS_PAD, 3803 NL80211_BSS_PARENT_TSF, 3804 NL80211_BSS_PARENT_BSSID, 3805 3806 /* keep last */ 3807 __NL80211_BSS_AFTER_LAST, 3808 NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 3809 }; 3810 3811 /** 3812 * enum nl80211_bss_status - BSS "status" 3813 * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. 3814 * Note that this is no longer used since cfg80211 no longer 3815 * keeps track of whether or not authentication was done with 3816 * a given BSS. 3817 * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. 3818 * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. 3819 * 3820 * The BSS status is a BSS attribute in scan dumps, which 3821 * indicates the status the interface has wrt. this BSS. 3822 */ 3823 enum nl80211_bss_status { 3824 NL80211_BSS_STATUS_AUTHENTICATED, 3825 NL80211_BSS_STATUS_ASSOCIATED, 3826 NL80211_BSS_STATUS_IBSS_JOINED, 3827 }; 3828 3829 /** 3830 * enum nl80211_auth_type - AuthenticationType 3831 * 3832 * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication 3833 * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) 3834 * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) 3835 * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) 3836 * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals 3837 * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key 3838 * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS 3839 * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key 3840 * @__NL80211_AUTHTYPE_NUM: internal 3841 * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm 3842 * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by 3843 * trying multiple times); this is invalid in netlink -- leave out 3844 * the attribute for this on CONNECT commands. 3845 */ 3846 enum nl80211_auth_type { 3847 NL80211_AUTHTYPE_OPEN_SYSTEM, 3848 NL80211_AUTHTYPE_SHARED_KEY, 3849 NL80211_AUTHTYPE_FT, 3850 NL80211_AUTHTYPE_NETWORK_EAP, 3851 NL80211_AUTHTYPE_SAE, 3852 NL80211_AUTHTYPE_FILS_SK, 3853 NL80211_AUTHTYPE_FILS_SK_PFS, 3854 NL80211_AUTHTYPE_FILS_PK, 3855 3856 /* keep last */ 3857 __NL80211_AUTHTYPE_NUM, 3858 NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, 3859 NL80211_AUTHTYPE_AUTOMATIC 3860 }; 3861 3862 /** 3863 * enum nl80211_key_type - Key Type 3864 * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key 3865 * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key 3866 * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) 3867 * @NUM_NL80211_KEYTYPES: number of defined key types 3868 */ 3869 enum nl80211_key_type { 3870 NL80211_KEYTYPE_GROUP, 3871 NL80211_KEYTYPE_PAIRWISE, 3872 NL80211_KEYTYPE_PEERKEY, 3873 3874 NUM_NL80211_KEYTYPES 3875 }; 3876 3877 /** 3878 * enum nl80211_mfp - Management frame protection state 3879 * @NL80211_MFP_NO: Management frame protection not used 3880 * @NL80211_MFP_REQUIRED: Management frame protection required 3881 */ 3882 enum nl80211_mfp { 3883 NL80211_MFP_NO, 3884 NL80211_MFP_REQUIRED, 3885 }; 3886 3887 enum nl80211_wpa_versions { 3888 NL80211_WPA_VERSION_1 = 1 << 0, 3889 NL80211_WPA_VERSION_2 = 1 << 1, 3890 }; 3891 3892 /** 3893 * enum nl80211_key_default_types - key default types 3894 * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid 3895 * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default 3896 * unicast key 3897 * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default 3898 * multicast key 3899 * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types 3900 */ 3901 enum nl80211_key_default_types { 3902 __NL80211_KEY_DEFAULT_TYPE_INVALID, 3903 NL80211_KEY_DEFAULT_TYPE_UNICAST, 3904 NL80211_KEY_DEFAULT_TYPE_MULTICAST, 3905 3906 NUM_NL80211_KEY_DEFAULT_TYPES 3907 }; 3908 3909 /** 3910 * enum nl80211_key_attributes - key attributes 3911 * @__NL80211_KEY_INVALID: invalid 3912 * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of 3913 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC 3914 * keys 3915 * @NL80211_KEY_IDX: key ID (u8, 0-3) 3916 * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 3917 * section 7.3.2.25.1, e.g. 0x000FAC04) 3918 * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and 3919 * CCMP keys, each six bytes in little endian 3920 * @NL80211_KEY_DEFAULT: flag indicating default key 3921 * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key 3922 * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not 3923 * specified the default depends on whether a MAC address was 3924 * given with the command using the key or not (u32) 3925 * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags 3926 * attributes, specifying what a key should be set as default as. 3927 * See &enum nl80211_key_default_types. 3928 * @__NL80211_KEY_AFTER_LAST: internal 3929 * @NL80211_KEY_MAX: highest key attribute 3930 */ 3931 enum nl80211_key_attributes { 3932 __NL80211_KEY_INVALID, 3933 NL80211_KEY_DATA, 3934 NL80211_KEY_IDX, 3935 NL80211_KEY_CIPHER, 3936 NL80211_KEY_SEQ, 3937 NL80211_KEY_DEFAULT, 3938 NL80211_KEY_DEFAULT_MGMT, 3939 NL80211_KEY_TYPE, 3940 NL80211_KEY_DEFAULT_TYPES, 3941 3942 /* keep last */ 3943 __NL80211_KEY_AFTER_LAST, 3944 NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 3945 }; 3946 3947 /** 3948 * enum nl80211_tx_rate_attributes - TX rate set attributes 3949 * @__NL80211_TXRATE_INVALID: invalid 3950 * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection 3951 * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with 3952 * 1 = 500 kbps) but without the IE length restriction (at most 3953 * %NL80211_MAX_SUPP_RATES in a single array). 3954 * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection 3955 * in an array of MCS numbers. 3956 * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, 3957 * see &struct nl80211_txrate_vht 3958 * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi 3959 * @__NL80211_TXRATE_AFTER_LAST: internal 3960 * @NL80211_TXRATE_MAX: highest TX rate attribute 3961 */ 3962 enum nl80211_tx_rate_attributes { 3963 __NL80211_TXRATE_INVALID, 3964 NL80211_TXRATE_LEGACY, 3965 NL80211_TXRATE_HT, 3966 NL80211_TXRATE_VHT, 3967 NL80211_TXRATE_GI, 3968 3969 /* keep last */ 3970 __NL80211_TXRATE_AFTER_LAST, 3971 NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 3972 }; 3973 3974 #define NL80211_TXRATE_MCS NL80211_TXRATE_HT 3975 #define NL80211_VHT_NSS_MAX 8 3976 3977 /** 3978 * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap 3979 * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) 3980 */ 3981 struct nl80211_txrate_vht { 3982 __u16 mcs[NL80211_VHT_NSS_MAX]; 3983 }; 3984 3985 enum nl80211_txrate_gi { 3986 NL80211_TXRATE_DEFAULT_GI, 3987 NL80211_TXRATE_FORCE_SGI, 3988 NL80211_TXRATE_FORCE_LGI, 3989 }; 3990 3991 /** 3992 * enum nl80211_band - Frequency band 3993 * @NL80211_BAND_2GHZ: 2.4 GHz ISM band 3994 * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) 3995 * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 64.80 GHz) 3996 * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace 3997 * since newer kernel versions may support more bands 3998 */ 3999 enum nl80211_band { 4000 NL80211_BAND_2GHZ, 4001 NL80211_BAND_5GHZ, 4002 NL80211_BAND_60GHZ, 4003 4004 NUM_NL80211_BANDS, 4005 }; 4006 4007 /** 4008 * enum nl80211_ps_state - powersave state 4009 * @NL80211_PS_DISABLED: powersave is disabled 4010 * @NL80211_PS_ENABLED: powersave is enabled 4011 */ 4012 enum nl80211_ps_state { 4013 NL80211_PS_DISABLED, 4014 NL80211_PS_ENABLED, 4015 }; 4016 4017 /** 4018 * enum nl80211_attr_cqm - connection quality monitor attributes 4019 * @__NL80211_ATTR_CQM_INVALID: invalid 4020 * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies 4021 * the threshold for the RSSI level at which an event will be sent. Zero 4022 * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is 4023 * set, multiple values can be supplied as a low-to-high sorted array of 4024 * threshold values in dBm. Events will be sent when the RSSI value 4025 * crosses any of the thresholds. 4026 * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies 4027 * the minimum amount the RSSI level must change after an event before a 4028 * new event may be issued (to reduce effects of RSSI oscillation). 4029 * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event 4030 * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many 4031 * consecutive packets were not acknowledged by the peer 4032 * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures 4033 * during the given %NL80211_ATTR_CQM_TXE_INTVL before an 4034 * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and 4035 * %NL80211_ATTR_CQM_TXE_PKTS is generated. 4036 * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given 4037 * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is 4038 * checked. 4039 * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic 4040 * interval in which %NL80211_ATTR_CQM_TXE_PKTS and 4041 * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an 4042 * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. 4043 * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon 4044 * loss event 4045 * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the 4046 * RSSI threshold event. 4047 * @__NL80211_ATTR_CQM_AFTER_LAST: internal 4048 * @NL80211_ATTR_CQM_MAX: highest key attribute 4049 */ 4050 enum nl80211_attr_cqm { 4051 __NL80211_ATTR_CQM_INVALID, 4052 NL80211_ATTR_CQM_RSSI_THOLD, 4053 NL80211_ATTR_CQM_RSSI_HYST, 4054 NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, 4055 NL80211_ATTR_CQM_PKT_LOSS_EVENT, 4056 NL80211_ATTR_CQM_TXE_RATE, 4057 NL80211_ATTR_CQM_TXE_PKTS, 4058 NL80211_ATTR_CQM_TXE_INTVL, 4059 NL80211_ATTR_CQM_BEACON_LOSS_EVENT, 4060 NL80211_ATTR_CQM_RSSI_LEVEL, 4061 4062 /* keep last */ 4063 __NL80211_ATTR_CQM_AFTER_LAST, 4064 NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 4065 }; 4066 4067 /** 4068 * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event 4069 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the 4070 * configured threshold 4071 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the 4072 * configured threshold 4073 * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent) 4074 */ 4075 enum nl80211_cqm_rssi_threshold_event { 4076 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, 4077 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, 4078 NL80211_CQM_RSSI_BEACON_LOSS_EVENT, 4079 }; 4080 4081 4082 /** 4083 * enum nl80211_tx_power_setting - TX power adjustment 4084 * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power 4085 * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter 4086 * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter 4087 */ 4088 enum nl80211_tx_power_setting { 4089 NL80211_TX_POWER_AUTOMATIC, 4090 NL80211_TX_POWER_LIMITED, 4091 NL80211_TX_POWER_FIXED, 4092 }; 4093 4094 /** 4095 * enum nl80211_packet_pattern_attr - packet pattern attribute 4096 * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute 4097 * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has 4098 * a zero bit are ignored 4099 * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have 4100 * a bit for each byte in the pattern. The lowest-order bit corresponds 4101 * to the first byte of the pattern, but the bytes of the pattern are 4102 * in a little-endian-like format, i.e. the 9th byte of the pattern 4103 * corresponds to the lowest-order bit in the second byte of the mask. 4104 * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where 4105 * xx indicates "don't care") would be represented by a pattern of 4106 * twelve zero bytes, and a mask of "0xed,0x01". 4107 * Note that the pattern matching is done as though frames were not 4108 * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked 4109 * first (including SNAP header unpacking) and then matched. 4110 * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after 4111 * these fixed number of bytes of received packet 4112 * @NUM_NL80211_PKTPAT: number of attributes 4113 * @MAX_NL80211_PKTPAT: max attribute number 4114 */ 4115 enum nl80211_packet_pattern_attr { 4116 __NL80211_PKTPAT_INVALID, 4117 NL80211_PKTPAT_MASK, 4118 NL80211_PKTPAT_PATTERN, 4119 NL80211_PKTPAT_OFFSET, 4120 4121 NUM_NL80211_PKTPAT, 4122 MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, 4123 }; 4124 4125 /** 4126 * struct nl80211_pattern_support - packet pattern support information 4127 * @max_patterns: maximum number of patterns supported 4128 * @min_pattern_len: minimum length of each pattern 4129 * @max_pattern_len: maximum length of each pattern 4130 * @max_pkt_offset: maximum Rx packet offset 4131 * 4132 * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when 4133 * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in 4134 * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of 4135 * %NL80211_ATTR_COALESCE_RULE in the capability information given 4136 * by the kernel to userspace. 4137 */ 4138 struct nl80211_pattern_support { 4139 __u32 max_patterns; 4140 __u32 min_pattern_len; 4141 __u32 max_pattern_len; 4142 __u32 max_pkt_offset; 4143 } __attribute__((packed)); 4144 4145 /* only for backward compatibility */ 4146 #define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID 4147 #define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK 4148 #define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN 4149 #define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET 4150 #define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT 4151 #define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT 4152 #define nl80211_wowlan_pattern_support nl80211_pattern_support 4153 4154 /** 4155 * enum nl80211_wowlan_triggers - WoWLAN trigger definitions 4156 * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes 4157 * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put 4158 * the chip into a special state -- works best with chips that have 4159 * support for low-power operation already (flag) 4160 * Note that this mode is incompatible with all of the others, if 4161 * any others are even supported by the device. 4162 * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect 4163 * is detected is implementation-specific (flag) 4164 * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed 4165 * by 16 repetitions of MAC addr, anywhere in payload) (flag) 4166 * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns 4167 * which are passed in an array of nested attributes, each nested attribute 4168 * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. 4169 * Each pattern defines a wakeup packet. Packet offset is associated with 4170 * each pattern which is used while matching the pattern. The matching is 4171 * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the 4172 * pattern matching is done after the packet is converted to the MSDU. 4173 * 4174 * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute 4175 * carrying a &struct nl80211_pattern_support. 4176 * 4177 * When reporting wakeup. it is a u32 attribute containing the 0-based 4178 * index of the pattern that caused the wakeup, in the patterns passed 4179 * to the kernel when configuring. 4180 * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be 4181 * used when setting, used only to indicate that GTK rekeying is supported 4182 * by the device (flag) 4183 * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if 4184 * done by the device) (flag) 4185 * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request 4186 * packet (flag) 4187 * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) 4188 * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released 4189 * (on devices that have rfkill in the device) (flag) 4190 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains 4191 * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame 4192 * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN 4193 * attribute contains the original length. 4194 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 4195 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 4196 * attribute if the packet was truncated somewhere. 4197 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the 4198 * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may 4199 * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute 4200 * contains the original length. 4201 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 4202 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 4203 * attribute if the packet was truncated somewhere. 4204 * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section 4205 * "TCP connection wakeup" for more details. This is a nested attribute 4206 * containing the exact information for establishing and keeping alive 4207 * the TCP connection. 4208 * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the 4209 * wakeup packet was received on the TCP connection 4210 * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the 4211 * TCP connection was lost or failed to be established 4212 * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, 4213 * the TCP connection ran out of tokens to use for data to send to the 4214 * service 4215 * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network 4216 * is detected. This is a nested attribute that contains the 4217 * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It 4218 * specifies how the scan is performed (e.g. the interval, the 4219 * channels to scan and the initial delay) as well as the scan 4220 * results that will trigger a wake (i.e. the matchsets). This 4221 * attribute is also sent in a response to 4222 * @NL80211_CMD_GET_WIPHY, indicating the number of match sets 4223 * supported by the driver (u32). 4224 * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute 4225 * containing an array with information about what triggered the 4226 * wake up. If no elements are present in the array, it means 4227 * that the information is not available. If more than one 4228 * element is present, it means that more than one match 4229 * occurred. 4230 * Each element in the array is a nested attribute that contains 4231 * one optional %NL80211_ATTR_SSID attribute and one optional 4232 * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of 4233 * these attributes must be present. If 4234 * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one 4235 * frequency, it means that the match occurred in more than one 4236 * channel. 4237 * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers 4238 * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number 4239 * 4240 * These nested attributes are used to configure the wakeup triggers and 4241 * to report the wakeup reason(s). 4242 */ 4243 enum nl80211_wowlan_triggers { 4244 __NL80211_WOWLAN_TRIG_INVALID, 4245 NL80211_WOWLAN_TRIG_ANY, 4246 NL80211_WOWLAN_TRIG_DISCONNECT, 4247 NL80211_WOWLAN_TRIG_MAGIC_PKT, 4248 NL80211_WOWLAN_TRIG_PKT_PATTERN, 4249 NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, 4250 NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, 4251 NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, 4252 NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, 4253 NL80211_WOWLAN_TRIG_RFKILL_RELEASE, 4254 NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, 4255 NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, 4256 NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, 4257 NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, 4258 NL80211_WOWLAN_TRIG_TCP_CONNECTION, 4259 NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, 4260 NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, 4261 NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, 4262 NL80211_WOWLAN_TRIG_NET_DETECT, 4263 NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, 4264 4265 /* keep last */ 4266 NUM_NL80211_WOWLAN_TRIG, 4267 MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 4268 }; 4269 4270 /** 4271 * DOC: TCP connection wakeup 4272 * 4273 * Some devices can establish a TCP connection in order to be woken up by a 4274 * packet coming in from outside their network segment, or behind NAT. If 4275 * configured, the device will establish a TCP connection to the given 4276 * service, and periodically send data to that service. The first data 4277 * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. 4278 * The data packets can optionally include a (little endian) sequence 4279 * number (in the TCP payload!) that is generated by the device, and, also 4280 * optionally, a token from a list of tokens. This serves as a keep-alive 4281 * with the service, and for NATed connections, etc. 4282 * 4283 * During this keep-alive period, the server doesn't send any data to the 4284 * client. When receiving data, it is compared against the wakeup pattern 4285 * (and mask) and if it matches, the host is woken up. Similarly, if the 4286 * connection breaks or cannot be established to start with, the host is 4287 * also woken up. 4288 * 4289 * Developer's note: ARP offload is required for this, otherwise TCP 4290 * response packets might not go through correctly. 4291 */ 4292 4293 /** 4294 * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence 4295 * @start: starting value 4296 * @offset: offset of sequence number in packet 4297 * @len: length of the sequence value to write, 1 through 4 4298 * 4299 * Note: don't confuse with the TCP sequence number(s), this is for the 4300 * keepalive packet payload. The actual value is written into the packet 4301 * in little endian. 4302 */ 4303 struct nl80211_wowlan_tcp_data_seq { 4304 __u32 start, offset, len; 4305 }; 4306 4307 /** 4308 * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config 4309 * @offset: offset of token in packet 4310 * @len: length of each token 4311 * @token_stream: stream of data to be used for the tokens, the length must 4312 * be a multiple of @len for this to make sense 4313 */ 4314 struct nl80211_wowlan_tcp_data_token { 4315 __u32 offset, len; 4316 __u8 token_stream[]; 4317 }; 4318 4319 /** 4320 * struct nl80211_wowlan_tcp_data_token_feature - data token features 4321 * @min_len: minimum token length 4322 * @max_len: maximum token length 4323 * @bufsize: total available token buffer size (max size of @token_stream) 4324 */ 4325 struct nl80211_wowlan_tcp_data_token_feature { 4326 __u32 min_len, max_len, bufsize; 4327 }; 4328 4329 /** 4330 * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters 4331 * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes 4332 * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) 4333 * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address 4334 * (in network byte order) 4335 * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because 4336 * route lookup when configured might be invalid by the time we suspend, 4337 * and doing a route lookup when suspending is no longer possible as it 4338 * might require ARP querying. 4339 * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a 4340 * socket and port will be allocated 4341 * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) 4342 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. 4343 * For feature advertising, a u32 attribute holding the maximum length 4344 * of the data payload. 4345 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration 4346 * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature 4347 * advertising it is just a flag 4348 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, 4349 * see &struct nl80211_wowlan_tcp_data_token and for advertising see 4350 * &struct nl80211_wowlan_tcp_data_token_feature. 4351 * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum 4352 * interval in feature advertising (u32) 4353 * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a 4354 * u32 attribute holding the maximum length 4355 * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for 4356 * feature advertising. The mask works like @NL80211_PKTPAT_MASK 4357 * but on the TCP payload only. 4358 * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes 4359 * @MAX_NL80211_WOWLAN_TCP: highest attribute number 4360 */ 4361 enum nl80211_wowlan_tcp_attrs { 4362 __NL80211_WOWLAN_TCP_INVALID, 4363 NL80211_WOWLAN_TCP_SRC_IPV4, 4364 NL80211_WOWLAN_TCP_DST_IPV4, 4365 NL80211_WOWLAN_TCP_DST_MAC, 4366 NL80211_WOWLAN_TCP_SRC_PORT, 4367 NL80211_WOWLAN_TCP_DST_PORT, 4368 NL80211_WOWLAN_TCP_DATA_PAYLOAD, 4369 NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, 4370 NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, 4371 NL80211_WOWLAN_TCP_DATA_INTERVAL, 4372 NL80211_WOWLAN_TCP_WAKE_PAYLOAD, 4373 NL80211_WOWLAN_TCP_WAKE_MASK, 4374 4375 /* keep last */ 4376 NUM_NL80211_WOWLAN_TCP, 4377 MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 4378 }; 4379 4380 /** 4381 * struct nl80211_coalesce_rule_support - coalesce rule support information 4382 * @max_rules: maximum number of rules supported 4383 * @pat: packet pattern support information 4384 * @max_delay: maximum supported coalescing delay in msecs 4385 * 4386 * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the 4387 * capability information given by the kernel to userspace. 4388 */ 4389 struct nl80211_coalesce_rule_support { 4390 __u32 max_rules; 4391 struct nl80211_pattern_support pat; 4392 __u32 max_delay; 4393 } __attribute__((packed)); 4394 4395 /** 4396 * enum nl80211_attr_coalesce_rule - coalesce rule attribute 4397 * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute 4398 * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing 4399 * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, 4400 * see &enum nl80211_coalesce_condition. 4401 * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched 4402 * after these fixed number of bytes of received packet 4403 * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes 4404 * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number 4405 */ 4406 enum nl80211_attr_coalesce_rule { 4407 __NL80211_COALESCE_RULE_INVALID, 4408 NL80211_ATTR_COALESCE_RULE_DELAY, 4409 NL80211_ATTR_COALESCE_RULE_CONDITION, 4410 NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, 4411 4412 /* keep last */ 4413 NUM_NL80211_ATTR_COALESCE_RULE, 4414 NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 4415 }; 4416 4417 /** 4418 * enum nl80211_coalesce_condition - coalesce rule conditions 4419 * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns 4420 * in a rule are matched. 4421 * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns 4422 * in a rule are not matched. 4423 */ 4424 enum nl80211_coalesce_condition { 4425 NL80211_COALESCE_CONDITION_MATCH, 4426 NL80211_COALESCE_CONDITION_NO_MATCH 4427 }; 4428 4429 /** 4430 * enum nl80211_iface_limit_attrs - limit attributes 4431 * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) 4432 * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that 4433 * can be chosen from this set of interface types (u32) 4434 * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a 4435 * flag attribute for each interface type in this set 4436 * @NUM_NL80211_IFACE_LIMIT: number of attributes 4437 * @MAX_NL80211_IFACE_LIMIT: highest attribute number 4438 */ 4439 enum nl80211_iface_limit_attrs { 4440 NL80211_IFACE_LIMIT_UNSPEC, 4441 NL80211_IFACE_LIMIT_MAX, 4442 NL80211_IFACE_LIMIT_TYPES, 4443 4444 /* keep last */ 4445 NUM_NL80211_IFACE_LIMIT, 4446 MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 4447 }; 4448 4449 /** 4450 * enum nl80211_if_combination_attrs -- interface combination attributes 4451 * 4452 * @NL80211_IFACE_COMB_UNSPEC: (reserved) 4453 * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits 4454 * for given interface types, see &enum nl80211_iface_limit_attrs. 4455 * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of 4456 * interfaces that can be created in this group. This number doesn't 4457 * apply to interfaces purely managed in software, which are listed 4458 * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. 4459 * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that 4460 * beacon intervals within this group must be all the same even for 4461 * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt 4462 * the infrastructure network's beacon interval. 4463 * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many 4464 * different channels may be used within this group. 4465 * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap 4466 * of supported channel widths for radar detection. 4467 * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap 4468 * of supported regulatory regions for radar detection. 4469 * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of 4470 * different beacon intervals supported by all the interface combinations 4471 * in this group (if not present, all beacon intervals be identical). 4472 * @NUM_NL80211_IFACE_COMB: number of attributes 4473 * @MAX_NL80211_IFACE_COMB: highest attribute number 4474 * 4475 * Examples: 4476 * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 4477 * => allows an AP and a STA that must match BIs 4478 * 4479 * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8, 4480 * => allows 8 of AP/GO that can have BI gcd >= min gcd 4481 * 4482 * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 4483 * => allows two STAs on different channels 4484 * 4485 * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 4486 * => allows a STA plus three P2P interfaces 4487 * 4488 * The list of these four possiblities could completely be contained 4489 * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate 4490 * that any of these groups must match. 4491 * 4492 * "Combinations" of just a single interface will not be listed here, 4493 * a single interface of any valid interface type is assumed to always 4494 * be possible by itself. This means that implicitly, for each valid 4495 * interface type, the following group always exists: 4496 * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1 4497 */ 4498 enum nl80211_if_combination_attrs { 4499 NL80211_IFACE_COMB_UNSPEC, 4500 NL80211_IFACE_COMB_LIMITS, 4501 NL80211_IFACE_COMB_MAXNUM, 4502 NL80211_IFACE_COMB_STA_AP_BI_MATCH, 4503 NL80211_IFACE_COMB_NUM_CHANNELS, 4504 NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, 4505 NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, 4506 NL80211_IFACE_COMB_BI_MIN_GCD, 4507 4508 /* keep last */ 4509 NUM_NL80211_IFACE_COMB, 4510 MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 4511 }; 4512 4513 4514 /** 4515 * enum nl80211_plink_state - state of a mesh peer link finite state machine 4516 * 4517 * @NL80211_PLINK_LISTEN: initial state, considered the implicit 4518 * state of non existant mesh peer links 4519 * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to 4520 * this mesh peer 4521 * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received 4522 * from this mesh peer 4523 * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been 4524 * received from this mesh peer 4525 * @NL80211_PLINK_ESTAB: mesh peer link is established 4526 * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled 4527 * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh 4528 * plink are discarded 4529 * @NUM_NL80211_PLINK_STATES: number of peer link states 4530 * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states 4531 */ 4532 enum nl80211_plink_state { 4533 NL80211_PLINK_LISTEN, 4534 NL80211_PLINK_OPN_SNT, 4535 NL80211_PLINK_OPN_RCVD, 4536 NL80211_PLINK_CNF_RCVD, 4537 NL80211_PLINK_ESTAB, 4538 NL80211_PLINK_HOLDING, 4539 NL80211_PLINK_BLOCKED, 4540 4541 /* keep last */ 4542 NUM_NL80211_PLINK_STATES, 4543 MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 4544 }; 4545 4546 /** 4547 * enum nl80211_plink_action - actions to perform in mesh peers 4548 * 4549 * @NL80211_PLINK_ACTION_NO_ACTION: perform no action 4550 * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment 4551 * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer 4552 * @NUM_NL80211_PLINK_ACTIONS: number of possible actions 4553 */ 4554 enum plink_actions { 4555 NL80211_PLINK_ACTION_NO_ACTION, 4556 NL80211_PLINK_ACTION_OPEN, 4557 NL80211_PLINK_ACTION_BLOCK, 4558 4559 NUM_NL80211_PLINK_ACTIONS, 4560 }; 4561 4562 4563 #define NL80211_KCK_LEN 16 4564 #define NL80211_KEK_LEN 16 4565 #define NL80211_REPLAY_CTR_LEN 8 4566 4567 /** 4568 * enum nl80211_rekey_data - attributes for GTK rekey offload 4569 * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes 4570 * @NL80211_REKEY_DATA_KEK: key encryption key (binary) 4571 * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) 4572 * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) 4573 * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) 4574 * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) 4575 */ 4576 enum nl80211_rekey_data { 4577 __NL80211_REKEY_DATA_INVALID, 4578 NL80211_REKEY_DATA_KEK, 4579 NL80211_REKEY_DATA_KCK, 4580 NL80211_REKEY_DATA_REPLAY_CTR, 4581 4582 /* keep last */ 4583 NUM_NL80211_REKEY_DATA, 4584 MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 4585 }; 4586 4587 /** 4588 * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID 4589 * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in 4590 * Beacon frames) 4591 * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element 4592 * in Beacon frames 4593 * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID 4594 * element in Beacon frames but zero out each byte in the SSID 4595 */ 4596 enum nl80211_hidden_ssid { 4597 NL80211_HIDDEN_SSID_NOT_IN_USE, 4598 NL80211_HIDDEN_SSID_ZERO_LEN, 4599 NL80211_HIDDEN_SSID_ZERO_CONTENTS 4600 }; 4601 4602 /** 4603 * enum nl80211_sta_wme_attr - station WME attributes 4604 * @__NL80211_STA_WME_INVALID: invalid number for nested attribute 4605 * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format 4606 * is the same as the AC bitmap in the QoS info field. 4607 * @NL80211_STA_WME_MAX_SP: max service period. the format is the same 4608 * as the MAX_SP field in the QoS info field (but already shifted down). 4609 * @__NL80211_STA_WME_AFTER_LAST: internal 4610 * @NL80211_STA_WME_MAX: highest station WME attribute 4611 */ 4612 enum nl80211_sta_wme_attr { 4613 __NL80211_STA_WME_INVALID, 4614 NL80211_STA_WME_UAPSD_QUEUES, 4615 NL80211_STA_WME_MAX_SP, 4616 4617 /* keep last */ 4618 __NL80211_STA_WME_AFTER_LAST, 4619 NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 4620 }; 4621 4622 /** 4623 * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates 4624 * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes 4625 * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher 4626 * priority) 4627 * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) 4628 * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) 4629 * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes 4630 * (internal) 4631 * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute 4632 * (internal) 4633 */ 4634 enum nl80211_pmksa_candidate_attr { 4635 __NL80211_PMKSA_CANDIDATE_INVALID, 4636 NL80211_PMKSA_CANDIDATE_INDEX, 4637 NL80211_PMKSA_CANDIDATE_BSSID, 4638 NL80211_PMKSA_CANDIDATE_PREAUTH, 4639 4640 /* keep last */ 4641 NUM_NL80211_PMKSA_CANDIDATE, 4642 MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 4643 }; 4644 4645 /** 4646 * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION 4647 * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request 4648 * @NL80211_TDLS_SETUP: Setup TDLS link 4649 * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established 4650 * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link 4651 * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link 4652 */ 4653 enum nl80211_tdls_operation { 4654 NL80211_TDLS_DISCOVERY_REQ, 4655 NL80211_TDLS_SETUP, 4656 NL80211_TDLS_TEARDOWN, 4657 NL80211_TDLS_ENABLE_LINK, 4658 NL80211_TDLS_DISABLE_LINK, 4659 }; 4660 4661 /* 4662 * enum nl80211_ap_sme_features - device-integrated AP features 4663 * Reserved for future use, no bits are defined in 4664 * NL80211_ATTR_DEVICE_AP_SME yet. 4665 enum nl80211_ap_sme_features { 4666 }; 4667 */ 4668 4669 /** 4670 * enum nl80211_feature_flags - device/driver features 4671 * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back 4672 * TX status to the socket error queue when requested with the 4673 * socket option. 4674 * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. 4675 * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up 4676 * the connected inactive stations in AP mode. 4677 * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested 4678 * to work properly to suppport receiving regulatory hints from 4679 * cellular base stations. 4680 * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only 4681 * here to reserve the value for API/ABI compatibility) 4682 * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of 4683 * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station 4684 * mode 4685 * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan 4686 * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported 4687 * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif 4688 * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting 4689 * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform 4690 * OBSS scans and generate 20/40 BSS coex reports. This flag is used only 4691 * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. 4692 * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window 4693 * setting 4694 * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic 4695 * powersave 4696 * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state 4697 * transitions for AP clients. Without this flag (and if the driver 4698 * doesn't have the AP SME in the device) the driver supports adding 4699 * stations only when they're associated and adds them in associated 4700 * state (to later be transitioned into authorized), with this flag 4701 * they should be added before even sending the authentication reply 4702 * and then transitioned into authenticated, associated and authorized 4703 * states using station flags. 4704 * Note that even for drivers that support this, the default is to add 4705 * stations in authenticated/associated state, so to add unauthenticated 4706 * stations the authenticated/associated bits have to be set in the mask. 4707 * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits 4708 * (HT40, VHT 80/160 MHz) if this flag is set 4709 * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh 4710 * Peering Management entity which may be implemented by registering for 4711 * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is 4712 * still generated by the driver. 4713 * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor 4714 * interface. An active monitor interface behaves like a normal monitor 4715 * interface, but gets added to the driver. It ensures that incoming 4716 * unicast packets directed at the configured interface address get ACKed. 4717 * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic 4718 * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the 4719 * lifetime of a BSS. 4720 * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter 4721 * Set IE to probe requests. 4722 * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE 4723 * to probe requests. 4724 * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period 4725 * requests sent to it by an AP. 4726 * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the 4727 * current tx power value into the TPC Report IE in the spectrum 4728 * management TPC Report action frame, and in the Radio Measurement Link 4729 * Measurement Report action frame. 4730 * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout 4731 * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used 4732 * to enable dynack. 4733 * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial 4734 * multiplexing powersave, ie. can turn off all but one chain 4735 * even on HT connections that should be using more chains. 4736 * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial 4737 * multiplexing powersave, ie. can turn off all but one chain 4738 * and then wake the rest up as required after, for example, 4739 * rts/cts handshake. 4740 * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM 4741 * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS 4742 * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it 4743 * needs to be able to handle Block-Ack agreements and other things. 4744 * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring 4745 * the vif's MAC address upon creation. 4746 * See 'macaddr' field in the vif_params (cfg80211.h). 4747 * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when 4748 * operating as a TDLS peer. 4749 * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a 4750 * random MAC address during scan (if the device is unassociated); the 4751 * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC 4752 * address mask/value will be used. 4753 * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports 4754 * using a random MAC address for every scan iteration during scheduled 4755 * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may 4756 * be set for scheduled scan and the MAC address mask/value will be used. 4757 * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a 4758 * random MAC address for every scan iteration during "net detect", i.e. 4759 * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may 4760 * be set for scheduled scan and the MAC address mask/value will be used. 4761 */ 4762 enum nl80211_feature_flags { 4763 NL80211_FEATURE_SK_TX_STATUS = 1 << 0, 4764 NL80211_FEATURE_HT_IBSS = 1 << 1, 4765 NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, 4766 NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, 4767 NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, 4768 NL80211_FEATURE_SAE = 1 << 5, 4769 NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, 4770 NL80211_FEATURE_SCAN_FLUSH = 1 << 7, 4771 NL80211_FEATURE_AP_SCAN = 1 << 8, 4772 NL80211_FEATURE_VIF_TXPOWER = 1 << 9, 4773 NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, 4774 NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, 4775 NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, 4776 /* bit 13 is reserved */ 4777 NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, 4778 NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, 4779 NL80211_FEATURE_USERSPACE_MPM = 1 << 16, 4780 NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, 4781 NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, 4782 NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, 4783 NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, 4784 NL80211_FEATURE_QUIET = 1 << 21, 4785 NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, 4786 NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, 4787 NL80211_FEATURE_STATIC_SMPS = 1 << 24, 4788 NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, 4789 NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26, 4790 NL80211_FEATURE_MAC_ON_CREATE = 1 << 27, 4791 NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, 4792 NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, 4793 NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, 4794 NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31, 4795 }; 4796 4797 /** 4798 * enum nl80211_ext_feature_index - bit index of extended features. 4799 * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. 4800 * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can 4801 * can request to use RRM (see %NL80211_ATTR_USE_RRM) with 4802 * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set 4803 * the ASSOC_REQ_USE_RRM flag in the association request even if 4804 * NL80211_FEATURE_QUIET is not advertized. 4805 * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air 4806 * sniffer which means that it can be configured to hear packets from 4807 * certain groups which can be configured by the 4808 * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, 4809 * or can be configured to follow a station by configuring the 4810 * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. 4811 * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual 4812 * time the scan started in scan results event. The time is the TSF of 4813 * the BSS that the interface that requested the scan is connected to 4814 * (if available). 4815 * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the 4816 * time the last beacon/probe was received. The time is the TSF of the 4817 * BSS that the interface that requested the scan is connected to 4818 * (if available). 4819 * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of 4820 * channel dwell time. 4821 * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate 4822 * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. 4823 * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate 4824 * configuration (AP/mesh) with HT rates. 4825 * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate 4826 * configuration (AP/mesh) with VHT rates. 4827 * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup 4828 * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode. 4829 * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA 4830 * in @NL80211_CMD_FRAME while not associated. 4831 * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports 4832 * randomized TA in @NL80211_CMD_FRAME while associated. 4833 * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan 4834 * for reporting BSSs with better RSSI than the current connected BSS 4835 * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI). 4836 * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the 4837 * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more 4838 * RSSI threshold values to monitor rather than exactly one threshold. 4839 * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key 4840 * authentication with %NL80211_CMD_CONNECT. 4841 * 4842 * @NUM_NL80211_EXT_FEATURES: number of extended features. 4843 * @MAX_NL80211_EXT_FEATURES: highest extended feature index. 4844 */ 4845 enum nl80211_ext_feature_index { 4846 NL80211_EXT_FEATURE_VHT_IBSS, 4847 NL80211_EXT_FEATURE_RRM, 4848 NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, 4849 NL80211_EXT_FEATURE_SCAN_START_TIME, 4850 NL80211_EXT_FEATURE_BSS_PARENT_TSF, 4851 NL80211_EXT_FEATURE_SET_SCAN_DWELL, 4852 NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, 4853 NL80211_EXT_FEATURE_BEACON_RATE_HT, 4854 NL80211_EXT_FEATURE_BEACON_RATE_VHT, 4855 NL80211_EXT_FEATURE_FILS_STA, 4856 NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA, 4857 NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED, 4858 NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI, 4859 NL80211_EXT_FEATURE_CQM_RSSI_LIST, 4860 NL80211_EXT_FEATURE_FILS_SK_OFFLOAD, 4861 4862 /* add new features before the definition below */ 4863 NUM_NL80211_EXT_FEATURES, 4864 MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 4865 }; 4866 4867 /** 4868 * enum nl80211_probe_resp_offload_support_attr - optional supported 4869 * protocols for probe-response offloading by the driver/FW. 4870 * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. 4871 * Each enum value represents a bit in the bitmap of supported 4872 * protocols. Typically a subset of probe-requests belonging to a 4873 * supported protocol will be excluded from offload and uploaded 4874 * to the host. 4875 * 4876 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 4877 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 4878 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P 4879 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u 4880 */ 4881 enum nl80211_probe_resp_offload_support_attr { 4882 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, 4883 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, 4884 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, 4885 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, 4886 }; 4887 4888 /** 4889 * enum nl80211_connect_failed_reason - connection request failed reasons 4890 * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be 4891 * handled by the AP is reached. 4892 * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. 4893 */ 4894 enum nl80211_connect_failed_reason { 4895 NL80211_CONN_FAIL_MAX_CLIENTS, 4896 NL80211_CONN_FAIL_BLOCKED_CLIENT, 4897 }; 4898 4899 /** 4900 * enum nl80211_timeout_reason - timeout reasons 4901 * 4902 * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified. 4903 * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out. 4904 * @NL80211_TIMEOUT_AUTH: Authentication timed out. 4905 * @NL80211_TIMEOUT_ASSOC: Association timed out. 4906 */ 4907 enum nl80211_timeout_reason { 4908 NL80211_TIMEOUT_UNSPECIFIED, 4909 NL80211_TIMEOUT_SCAN, 4910 NL80211_TIMEOUT_AUTH, 4911 NL80211_TIMEOUT_ASSOC, 4912 }; 4913 4914 /** 4915 * enum nl80211_scan_flags - scan request control flags 4916 * 4917 * Scan request control flags are used to control the handling 4918 * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN 4919 * requests. 4920 * 4921 * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority 4922 * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning 4923 * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured 4924 * as AP and the beaconing has already been configured. This attribute is 4925 * dangerous because will destroy stations performance as a lot of frames 4926 * will be lost while scanning off-channel, therefore it must be used only 4927 * when really needed 4928 * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or 4929 * for scheduled scan: a different one for every scan iteration). When the 4930 * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and 4931 * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only 4932 * the masked bits will be preserved from the MAC address and the remainder 4933 * randomised. If the attributes are not given full randomisation (46 bits, 4934 * locally administered 1, multicast 0) is assumed. 4935 * This flag must not be requested when the feature isn't supported, check 4936 * the nl80211 feature flags for the device. 4937 */ 4938 enum nl80211_scan_flags { 4939 NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, 4940 NL80211_SCAN_FLAG_FLUSH = 1<<1, 4941 NL80211_SCAN_FLAG_AP = 1<<2, 4942 NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, 4943 }; 4944 4945 /** 4946 * enum nl80211_acl_policy - access control policy 4947 * 4948 * Access control policy is applied on a MAC list set by 4949 * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to 4950 * be used with %NL80211_ATTR_ACL_POLICY. 4951 * 4952 * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are 4953 * listed in ACL, i.e. allow all the stations which are not listed 4954 * in ACL to authenticate. 4955 * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed 4956 * in ACL, i.e. deny all the stations which are not listed in ACL. 4957 */ 4958 enum nl80211_acl_policy { 4959 NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, 4960 NL80211_ACL_POLICY_DENY_UNLESS_LISTED, 4961 }; 4962 4963 /** 4964 * enum nl80211_smps_mode - SMPS mode 4965 * 4966 * Requested SMPS mode (for AP mode) 4967 * 4968 * @NL80211_SMPS_OFF: SMPS off (use all antennas). 4969 * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) 4970 * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and 4971 * turn on other antennas after CTS/RTS). 4972 */ 4973 enum nl80211_smps_mode { 4974 NL80211_SMPS_OFF, 4975 NL80211_SMPS_STATIC, 4976 NL80211_SMPS_DYNAMIC, 4977 4978 __NL80211_SMPS_AFTER_LAST, 4979 NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 4980 }; 4981 4982 /** 4983 * enum nl80211_radar_event - type of radar event for DFS operation 4984 * 4985 * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace 4986 * about detected radars or success of the channel available check (CAC) 4987 * 4988 * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is 4989 * now unusable. 4990 * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, 4991 * the channel is now available. 4992 * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no 4993 * change to the channel status. 4994 * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is 4995 * over, channel becomes usable. 4996 * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this 4997 * non-operating channel is expired and no longer valid. New CAC must 4998 * be done on this channel before starting the operation. This is not 4999 * applicable for ETSI dfs domain where pre-CAC is valid for ever. 5000 */ 5001 enum nl80211_radar_event { 5002 NL80211_RADAR_DETECTED, 5003 NL80211_RADAR_CAC_FINISHED, 5004 NL80211_RADAR_CAC_ABORTED, 5005 NL80211_RADAR_NOP_FINISHED, 5006 NL80211_RADAR_PRE_CAC_EXPIRED, 5007 }; 5008 5009 /** 5010 * enum nl80211_dfs_state - DFS states for channels 5011 * 5012 * Channel states used by the DFS code. 5013 * 5014 * @NL80211_DFS_USABLE: The channel can be used, but channel availability 5015 * check (CAC) must be performed before using it for AP or IBSS. 5016 * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it 5017 * is therefore marked as not available. 5018 * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available. 5019 */ 5020 enum nl80211_dfs_state { 5021 NL80211_DFS_USABLE, 5022 NL80211_DFS_UNAVAILABLE, 5023 NL80211_DFS_AVAILABLE, 5024 }; 5025 5026 /** 5027 * enum enum nl80211_protocol_features - nl80211 protocol features 5028 * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting 5029 * wiphy dumps (if requested by the application with the attribute 5030 * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the 5031 * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or 5032 * %NL80211_ATTR_WDEV. 5033 */ 5034 enum nl80211_protocol_features { 5035 NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0, 5036 }; 5037 5038 /** 5039 * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers 5040 * 5041 * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified. 5042 * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol. 5043 * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol. 5044 * @NL80211_CRIT_PROTO_APIPA: APIPA protocol. 5045 * @NUM_NL80211_CRIT_PROTO: must be kept last. 5046 */ 5047 enum nl80211_crit_proto_id { 5048 NL80211_CRIT_PROTO_UNSPEC, 5049 NL80211_CRIT_PROTO_DHCP, 5050 NL80211_CRIT_PROTO_EAPOL, 5051 NL80211_CRIT_PROTO_APIPA, 5052 /* add other protocols before this one */ 5053 NUM_NL80211_CRIT_PROTO 5054 }; 5055 5056 /* maximum duration for critical protocol measures */ 5057 #define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */ 5058 5059 /** 5060 * enum nl80211_rxmgmt_flags - flags for received management frame. 5061 * 5062 * Used by cfg80211_rx_mgmt() 5063 * 5064 * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. 5065 */ 5066 enum nl80211_rxmgmt_flags { 5067 NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, 5068 }; 5069 5070 /* 5071 * If this flag is unset, the lower 24 bits are an OUI, if set 5072 * a Linux nl80211 vendor ID is used (no such IDs are allocated 5073 * yet, so that's not valid so far) 5074 */ 5075 #define NL80211_VENDOR_ID_IS_LINUX 0x80000000 5076 5077 /** 5078 * struct nl80211_vendor_cmd_info - vendor command data 5079 * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the 5080 * value is a 24-bit OUI; if it is set then a separately allocated ID 5081 * may be used, but no such IDs are allocated yet. New IDs should be 5082 * added to this file when needed. 5083 * @subcmd: sub-command ID for the command 5084 */ 5085 struct nl80211_vendor_cmd_info { 5086 __u32 vendor_id; 5087 __u32 subcmd; 5088 }; 5089 5090 /** 5091 * enum nl80211_tdls_peer_capability - TDLS peer flags. 5092 * 5093 * Used by tdls_mgmt() to determine which conditional elements need 5094 * to be added to TDLS Setup frames. 5095 * 5096 * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. 5097 * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. 5098 * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. 5099 */ 5100 enum nl80211_tdls_peer_capability { 5101 NL80211_TDLS_PEER_HT = 1<<0, 5102 NL80211_TDLS_PEER_VHT = 1<<1, 5103 NL80211_TDLS_PEER_WMM = 1<<2, 5104 }; 5105 5106 /** 5107 * enum nl80211_sched_scan_plan - scanning plan for scheduled scan 5108 * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved 5109 * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In 5110 * seconds (u32). 5111 * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this 5112 * scan plan (u32). The last scan plan must not specify this attribute 5113 * because it will run infinitely. A value of zero is invalid as it will 5114 * make the scan plan meaningless. 5115 * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number 5116 * currently defined 5117 * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use 5118 */ 5119 enum nl80211_sched_scan_plan { 5120 __NL80211_SCHED_SCAN_PLAN_INVALID, 5121 NL80211_SCHED_SCAN_PLAN_INTERVAL, 5122 NL80211_SCHED_SCAN_PLAN_ITERATIONS, 5123 5124 /* keep last */ 5125 __NL80211_SCHED_SCAN_PLAN_AFTER_LAST, 5126 NL80211_SCHED_SCAN_PLAN_MAX = 5127 __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 5128 }; 5129 5130 /** 5131 * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. 5132 * 5133 * @band: band of BSS that must match for RSSI value adjustment. The value 5134 * of this field is according to &enum nl80211_band. 5135 * @delta: value used to adjust the RSSI value of matching BSS in dB. 5136 */ 5137 struct nl80211_bss_select_rssi_adjust { 5138 __u8 band; 5139 __s8 delta; 5140 } __attribute__((packed)); 5141 5142 /** 5143 * enum nl80211_bss_select_attr - attributes for bss selection. 5144 * 5145 * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. 5146 * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection 5147 * is requested. 5148 * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS 5149 * selection should be done such that the specified band is preferred. 5150 * When there are multiple BSS-es in the preferred band, the driver 5151 * shall use RSSI-based BSS selection as a second step. The value of 5152 * this attribute is according to &enum nl80211_band (u32). 5153 * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for 5154 * BSS-es in the specified band is to be adjusted before doing 5155 * RSSI-based BSS selection. The attribute value is a packed structure 5156 * value as specified by &struct nl80211_bss_select_rssi_adjust. 5157 * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. 5158 * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. 5159 * 5160 * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT 5161 * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour 5162 * which the driver shall use. 5163 */ 5164 enum nl80211_bss_select_attr { 5165 __NL80211_BSS_SELECT_ATTR_INVALID, 5166 NL80211_BSS_SELECT_ATTR_RSSI, 5167 NL80211_BSS_SELECT_ATTR_BAND_PREF, 5168 NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, 5169 5170 /* keep last */ 5171 __NL80211_BSS_SELECT_ATTR_AFTER_LAST, 5172 NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 5173 }; 5174 5175 /** 5176 * enum nl80211_nan_function_type - NAN function type 5177 * 5178 * Defines the function type of a NAN function 5179 * 5180 * @NL80211_NAN_FUNC_PUBLISH: function is publish 5181 * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe 5182 * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up 5183 */ 5184 enum nl80211_nan_function_type { 5185 NL80211_NAN_FUNC_PUBLISH, 5186 NL80211_NAN_FUNC_SUBSCRIBE, 5187 NL80211_NAN_FUNC_FOLLOW_UP, 5188 5189 /* keep last */ 5190 __NL80211_NAN_FUNC_TYPE_AFTER_LAST, 5191 NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1, 5192 }; 5193 5194 /** 5195 * enum nl80211_nan_publish_type - NAN publish tx type 5196 * 5197 * Defines how to send publish Service Discovery Frames 5198 * 5199 * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited 5200 * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited 5201 */ 5202 enum nl80211_nan_publish_type { 5203 NL80211_NAN_SOLICITED_PUBLISH = 1 << 0, 5204 NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1, 5205 }; 5206 5207 /** 5208 * enum nl80211_nan_func_term_reason - NAN functions termination reason 5209 * 5210 * Defines termination reasons of a NAN function 5211 * 5212 * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user 5213 * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout 5214 * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored 5215 */ 5216 enum nl80211_nan_func_term_reason { 5217 NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST, 5218 NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED, 5219 NL80211_NAN_FUNC_TERM_REASON_ERROR, 5220 }; 5221 5222 #define NL80211_NAN_FUNC_SERVICE_ID_LEN 6 5223 #define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff 5224 #define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff 5225 5226 /** 5227 * enum nl80211_nan_func_attributes - NAN function attributes 5228 * @__NL80211_NAN_FUNC_INVALID: invalid 5229 * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8). 5230 * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as 5231 * specified in NAN spec. This is a binary attribute. 5232 * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is 5233 * publish. Defines the transmission type for the publish Service Discovery 5234 * Frame, see &enum nl80211_nan_publish_type. Its type is u8. 5235 * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited 5236 * publish. Should the solicited publish Service Discovery Frame be sent to 5237 * the NAN Broadcast address. This is a flag. 5238 * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is 5239 * subscribe. Is the subscribe active. This is a flag. 5240 * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up. 5241 * The instance ID for the follow up Service Discovery Frame. This is u8. 5242 * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type 5243 * is follow up. This is a u8. 5244 * The requestor instance ID for the follow up Service Discovery Frame. 5245 * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the 5246 * follow up Service Discovery Frame. This is a binary attribute. 5247 * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a 5248 * close range. The range itself (RSSI) is defined by the device. 5249 * This is a flag. 5250 * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should 5251 * stay active. If not present infinite TTL is assumed. This is a u32. 5252 * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service 5253 * specific info. This is a binary attribute. 5254 * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute. 5255 * See &enum nl80211_nan_srf_attributes. 5256 * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested 5257 * attribute. It is a list of binary values. 5258 * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a 5259 * nested attribute. It is a list of binary values. 5260 * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function. 5261 * Its type is u8 and it cannot be 0. 5262 * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason. 5263 * See &enum nl80211_nan_func_term_reason. 5264 * 5265 * @NUM_NL80211_NAN_FUNC_ATTR: internal 5266 * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute 5267 */ 5268 enum nl80211_nan_func_attributes { 5269 __NL80211_NAN_FUNC_INVALID, 5270 NL80211_NAN_FUNC_TYPE, 5271 NL80211_NAN_FUNC_SERVICE_ID, 5272 NL80211_NAN_FUNC_PUBLISH_TYPE, 5273 NL80211_NAN_FUNC_PUBLISH_BCAST, 5274 NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE, 5275 NL80211_NAN_FUNC_FOLLOW_UP_ID, 5276 NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID, 5277 NL80211_NAN_FUNC_FOLLOW_UP_DEST, 5278 NL80211_NAN_FUNC_CLOSE_RANGE, 5279 NL80211_NAN_FUNC_TTL, 5280 NL80211_NAN_FUNC_SERVICE_INFO, 5281 NL80211_NAN_FUNC_SRF, 5282 NL80211_NAN_FUNC_RX_MATCH_FILTER, 5283 NL80211_NAN_FUNC_TX_MATCH_FILTER, 5284 NL80211_NAN_FUNC_INSTANCE_ID, 5285 NL80211_NAN_FUNC_TERM_REASON, 5286 5287 /* keep last */ 5288 NUM_NL80211_NAN_FUNC_ATTR, 5289 NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1 5290 }; 5291 5292 /** 5293 * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes 5294 * @__NL80211_NAN_SRF_INVALID: invalid 5295 * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. 5296 * This is a flag. 5297 * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if 5298 * &NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. 5299 * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if 5300 * &NL80211_NAN_SRF_BF is present. This is a u8. 5301 * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if 5302 * and only if &NL80211_NAN_SRF_BF isn't present. This is a nested 5303 * attribute. Each nested attribute is a MAC address. 5304 * @NUM_NL80211_NAN_SRF_ATTR: internal 5305 * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute 5306 */ 5307 enum nl80211_nan_srf_attributes { 5308 __NL80211_NAN_SRF_INVALID, 5309 NL80211_NAN_SRF_INCLUDE, 5310 NL80211_NAN_SRF_BF, 5311 NL80211_NAN_SRF_BF_IDX, 5312 NL80211_NAN_SRF_MAC_ADDRS, 5313 5314 /* keep last */ 5315 NUM_NL80211_NAN_SRF_ATTR, 5316 NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1, 5317 }; 5318 5319 /** 5320 * enum nl80211_nan_match_attributes - NAN match attributes 5321 * @__NL80211_NAN_MATCH_INVALID: invalid 5322 * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the 5323 * match. This is a nested attribute. 5324 * See &enum nl80211_nan_func_attributes. 5325 * @NL80211_NAN_MATCH_FUNC_PEER: the peer function 5326 * that caused the match. This is a nested attribute. 5327 * See &enum nl80211_nan_func_attributes. 5328 * 5329 * @NUM_NL80211_NAN_MATCH_ATTR: internal 5330 * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute 5331 */ 5332 enum nl80211_nan_match_attributes { 5333 __NL80211_NAN_MATCH_INVALID, 5334 NL80211_NAN_MATCH_FUNC_LOCAL, 5335 NL80211_NAN_MATCH_FUNC_PEER, 5336 5337 /* keep last */ 5338 NUM_NL80211_NAN_MATCH_ATTR, 5339 NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 5340 }; 5341 5342 #endif /* __LINUX_NL80211_H */ 5343