1Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com> 2 3 * mips-opc.c: Add FP_D to s.d instruction flags. 4 5Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> 6 7 * m68k-opc.c (halt, pulse): Enable them on the 68060. 8 9Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com> 10 11 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit 12 PC relative offset forms before the 15 bit forms. An assembler command 13 line option now chooses the default. 14 15Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com> 16 17 * d30v-opc.c (d30v_opcode_table): Set new flags bits 18 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions. 19 201997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com> 21 22 * configure: Only build libopcodes shared if --enable-shared's value 23 was `yes', or was set to `*opcodes*'. 24 * aclocal.m4: Likewise. 25 * NOTE: this really needs to be fixed in libtool/libtool.m4, the 26 original source of this bit of code. It's not clear what the best fix 27 would be, though. 28 29Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com> 30 31 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change. 32 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative 33 offset forms before the 15 bit forms, to default to the long forms. 34 35Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com> 36 37 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid. 38 39Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com> 40 41 * arm-dis.c (print_insn_little_arm): Prevent examination of stored 42 symbol if none is present. 43 (print_insn_big_arm): Prevent examination of stored symbol if 44 none is present. 45 46Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com> 47 48 * d10v-opc.c (d10v_opcodes): Correct entry for RTE. 49 50Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com> 51 52 * disassemble.c: Remove disasm_symaddr() function. 53 54 * arm-dis.c: Use info->symbol instead of info->flags to determine 55 if disassmbly should be in Thumb or Arm mode. 56 57Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com> 58 59 * arm-dis.c: Add support for disassembling Thumb opcodes. 60 (print_insn_thumb): New function. 61 62 * disassemble.c (disasm_symaddr): New function. 63 64 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly. 65 (thumb_opcodes): Table of Thumb opcodes. 66 67Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> 68 69 * m68k-opc.c (btst): Change Dd@s to Dd;b. 70 71 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q', 72 and 'v' as operand types. 73 74Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com> 75 76 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona 77 <olivier.carmona@di.epfl.ch>. 78 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop, 79 which has a two word opcode with a one word argument. 80 81Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com> 82 83 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is 84 unsigned, not signed. 85 (d30v_format_table): Add SHORT_CMPU cases for cmpu. 86 87Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk> 88 89 * d10v-dis.c (print_operand): 90 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG. 91 92Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk> 93 94 * d10v-opc.c (OPERAND_FLAG): Split into: 95 (OPERAND_FFLAG, OPERAND_CFLAG) . 96 (FSRC): Split into: 97 (FFSRC, CFSRC). 98 99Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com> 100 101 * mips-opc.c: Move the INSN_MACRO ISA value to the membership 102 field for all INSN_MACRO's. 103 * mips16-opc.c: same 104 105Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com> 106 107 * mips-opc.c (sync,cache): These are 3900 insns. 108 109Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk> 110 111 sh-opc.h (sh_table): Remove ftst/nan. 112 113Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com> 114 115 * mips-opc.c (ffc, ffs): Fix mask. 116 117Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com> 118 119 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m 120 control registers. 121 122Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com> 123 124 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction. 125 (WR_HILO, RD_HILO, MOD_HILO): New macros. 126 127Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com> 128 129 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction. 130 (WR_HILO, RD_HILO, MOD_HILO): New macros. 131 132Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com> 133 134 * v850-dis.c (disassemble): Replace // with /* ... */ 135 136Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com> 137 138 * sparc-opc.c: Add wr & rd for v9a asr's. 139 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's. 140 (v9a_asr_reg_names): New variable. 141 Patch from David Miller <davem@vger.rutgers.edu>. 142 143Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com> 144 145 * sparc-opc.c (v9notv9a): New insn type. 146 (IMPDEP): Move to the end to not conflict with edge8 et al. 147 Patch from David Miller <davem@vger.rutgers.edu>. 148 149Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com> 150 151 * mips-opc.c (bnezl,beqzl): Mark these as also tx39. 152 153Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com> 154 155 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1. 156 157Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com> 158 159 * v850-dis.c (disassemble): Use new symbol_at_address_func() field 160 of disassemble_info structure to determine if an overlay address 161 has a matching symbol in low memory. 162 163 * dis-buf.c (generic_symbol_at_address): New (dummy) function for 164 new symbol_at_address_func field in disassemble_info structure. 165 166Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com> 167 168 * v850-opc.c (extract_d22): Use signed arithmatic. 169 170Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com> 171 172 * mips-opc.c: Three op mult is not an ISA insn. 173 174Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com> 175 176 * mips-opc.c: Fix formatting. 177 178Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com> 179 180 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather 181 than assuming that char is signed. Explicitly sign extend 16 bit 182 values, rather than assuming that short is 16 bits. 183 (OP_sI, OP_J, OP_DIR): Likewise. 184 185Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com> 186 187 * v850-dis.c (v850_sreg_names): Use symbolic names for higher 188 system registers. 189 190Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com> 191 192 * v850-opc.c: Fix typo in comment. 193 194 * v850-dis.c (disassemble): Add test of processor type when 195 determining opcodes. 196 197Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com> 198 199 * configure.in: Use a diversion to set enable_shared before the 200 arguments are parsed. 201 * configure: Rebuild. 202 203Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com> 204 205 * m68k-opc.c (TBL1): Use ! rather than `. 206 * m68k-dis.c (print_insn_arg): Remove ` operand specifier. 207 208Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com> 209 210 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire. 211 212 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32. 213 214 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr 215 for mcf5200. 216 217 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL. 218 * aclocal.m4: Rebuild with new libtool. 219 * configure: Rebuild. 220 221Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com> 222 223 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2. 224 225Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com> 226 227 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr. 228 229Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com> 230 231 * v850-opc.c (v850_opcodes): Further rearrangements. 232 233Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com> 234 235 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change. 236 237Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com> 238 239 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler 240 parser to work. 241 242Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com> 243 244 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret. 245 246Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com> 247 248 * v850-opc.c: Initialise processors field of v850_opcode structure. 249 250Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com> 251 252 Merge changes from Martin Hunt: 253 254 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values. 255 256 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63. 257 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix 258 rot2h, sra2h, and srl2h to use new SHORT_A5S format. 259 260 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes. 261 262 * d30v-dis.c (print_insn): First operand of d*i (delayed 263 branch) instructions is relative. 264 265 * d30v-opc.c (d30v_opcode_table): Change form for repeati. 266 (d30v_operand_table): Add IMM6S3 type. 267 (d30v_format_table): Change SHORT_D2. Add LONG_Db. 268 269 * d30v-dis.c: Fix bug with ".s" and ".l" extensions 270 and cmp instructions. 271 272 * d30v-opc.c: Correct entries for repeat*, and sat*. 273 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand 274 types. Correct several formats. 275 276 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc. 277 278 * d30v-opc.c (pre_defined_registers): Change control registers. 279 280 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and 281 SHORT_C2. Manual was incorrect. 282 283 * d30v-dis.c (lookup_opcode): Return value now indicates 284 if an opcode has a short and a long form. Used for deciding 285 to append a ".s" or ".l". 286 (print_insn): Append a ".s" to an instruction if it is 287 the short form and ".l" if it is a long form. Do not append 288 anything if the instruction has only one possible size. 289 290 * d30v-opc.c: Change mulx2h to require an even register. 291 New form: SHORT_A2; a SHORT_A form that needs an even 292 register as the first operand. 293 294 * d30v-dis.c (print_insn_d30v): Fix problem where the last 295 instruction was not being disassembled if there were an odd 296 number of instructions. 297 298 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms. 299 300Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com> 301 302 * v850-dis.c (disassemble): Improved display of register lists. 303 304Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com> 305 306 * sparc-opc.c (sparc_opcodes): Fix assembler args to 307 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s, 308 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s, 309 fandnot1s, fandnot2s. 310 311Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com> 312 313 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq. 314 315Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com> 316 317 * cgen-asm.c (cgen_parse_address): New argument resultp. 318 All callers updated. 319 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16. 320 321Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com) 322 323 * mn10200-dis.c (disassemble): PC relative instructions are 324 relative to the next instruction, not the current instruction. 325 326Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com> 327 328 * v850-dis.c (disassemble): Only signed extend values that are not 329 returned by extract functions. 330 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag. 331 332Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com> 333 334 * v850-opc.c: Update comments. Remove use of 335 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns. 336 337Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com> 338 339 * v850-opc.c (MOVHI): Immediate parameter is unsigned. 340 341Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com> 342 343 * configure: Rebuilt with latest devo autoconf for NT support. 344 345Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com> 346 347 * v850-dis.c (disassemble): Use curly brace syntax for register 348 lists. 349 350 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases 351 where r0 is being used as a destination register. 352 353Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com> 354 355 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other. 356 357Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com> 358 359 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage. 360 361Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com> 362 363 * v850-opc.c (v850_opcodes[]): Remove use of flag field. 364 * v850-opc.c (v850_opcodes[]): Add support for reversed short load 365 opcodes.. 366 367Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com> 368 369 * configure (cgen_files): Add support for v850e target. 370 * configure.in (cgen_files): Add support for v850e target. 371 372Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com> 373 374 * configure (cgen_files): Add support for v850ea target. 375 * configure.in (cgen_files): Add support for v850ea target. 376 377Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com> 378 379 * configure.in (bfd_arc_arch): Add. 380 * configure: Rebuild. 381 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo. 382 * Makefile.in: Rebuild. 383 * arc-dis.c, arc-opc.c: New files. 384 * disassemble.c (ARCH_all): Define ARCH_arc. 385 (disassembler): Add ARC support. 386 387Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com> 388 389 * v850-dis.c (disassemble): Add support for v850EA instructions. 390 391 * v850-opc.c (insert_i5div, extract_i5div): New Functions. 392 (v850_opcodes): Add v850EA instructions. 393 394 * v850-dis.c (disassemble): Add support for v850E instructions. 395 396 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16, 397 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9, 398 insert_spe, extract_spe): New Functions. 399 (v850_opcodes): Add v850E instructions. 400 401 * v850-opc.c: Reorganised and re-layed out to improve readability 402 and portability. 403 404Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com> 405 406 * configure: Rebuild with autoconf 2.12.1. 407 408Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com> 409 410 * aclocal.m4, configure: Rebuild with new automake patches. 411 412Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com> 413 414 * configure.in: Set enable_shared before AM_PROG_LIBTOOL. 415 * acinclude.m4: Just include acinclude.m4 from BFD. 416 * aclocal.m4, configure: Rebuild. 417 418Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com> 419 420 * Makefile.am: New file, based on old Makefile.in. 421 * acconfig.h: New file. 422 * acinclude.m4: New file. 423 * stamp-h.in: New file. 424 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL. 425 Removed shared library handling; now handled by libtool. Replace 426 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE, 427 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with 428 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h 429 handling in AC_OUTPUT. 430 * dep-in.sed: Change .o to .lo. 431 * Makefile.in: Now built with automake. 432 * aclocal.m4: Now built with aclocal. 433 * config.in, configure: Rebuild. 434 435Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com) 436 437 * mips-opc.c: Fix typo/thinko in "eret" instruction. 438 439Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com> 440 441 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns. 442 Make array const. 443 * sparc-dis.c (sorted_opcodes): New static local. 444 (struct opcode_hash): `opcode' is pointer to const element. 445 (build_hash): First arg is now table of sorted pointers. 446 (print_insn_sparc): Sort opcodes by sorting table of pointers. 447 (compare_opcodes): Update. 448 449Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com> 450 451 * cgen-opc.c: #include <ctype.h>. 452 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated. 453 Handle case insensitive hashing. 454 (hash_keyword_value): Change type of `value' to unsigned int. 455 456Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com) 457 458 * mips-opc.c (mips_builtin_opcodes): If an insn uses single 459 precision FP, mark it as such. Likewise for double precision 460 FP. Mark ISA1 insns. Consolidate duplicate opcodes where 461 possible. 462 463Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com> 464 465 * ppc-opc.c (extract_nsi): make unsigned expression signed before 466 negating it. 467 (UNUSED): remove one level of parens, so MSVC doesn't choke on 468 nesting depth when all the macros are expanded. 469 470Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com> 471 472 * sparc-opc.c: The fcmp v9a instructions take an integer register 473 as a destination, not a floating point register. From Christian 474 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>. 475 476Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com> 477 478 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@() 479 syntax. From Roman Hodek 480 <rnhodek@faui22c.informatik.uni-erlangen.de>. 481 482 * i386-dis.c (twobyte_has_modrm): Fix pand. 483 484Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu> 485 486 * i386-dis.c (dis386_twobyte): Fix pand and pandn. 487 488Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu> 489 490 * arm-dis.c: Add prototypes for arm_decode_shift and 491 print_insn_arm. 492 493Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com> 494 495 * mips-opc.c: Add r3900 insns. 496 497Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com> 498 499 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't 500 print delay slot instructions on the same line. When using a PC 501 relative load, add a comment with the value being loaded if it can 502 be obtained. 503 504Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au> 505 506 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl 507 to pushS/popS for segment regs and byte constant so that 508 pushw/popw printed when in 16 bit data mode. 509 510 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to 511 print cbtw, cwtd in 16 bit data mode. 512 * i386-dis.c (putop): extra case W to support above. 513 514 * i386-dis.c (print_insn_x86): print addr32 prefix when given 515 address size prefix in 16 bit address mode. 516 517Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com> 518 519 * sh-dis.c: Reindent. Rename local variable fprintf to 520 fprintf_fn. 521 522Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com> 523 524 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2. 525 526Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com> 527 528 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new 529 field membership. 530 * mips16-opc.c (mip16_opcodes): same. 531 532Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com> 533 534 * m68k-opc.c (moveb): Change $d to %d. 535 536Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com> 537 538 * i386-dis.c: (dis386_twobyte): Add MMX instructions. 539 (twobyte_has_modrm): Likewise. 540 (grps): Likewise. 541 (OP_MMX, OP_EM, OP_MS): New static functions. 542 543 * i386-dis.c: Revert patch of April 4. The output now matches 544 what gcc generates. 545 546Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com> 547 548 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead 549 of $simm16. 550 551Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com> 552 553 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU. 554 555Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com> 556 557 * Makefile.in (install): Depend upon installdirs. 558 (installdirs): New target. 559 560Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com> 561 562 From Thomas Graichen <graichen@rzpd.de>: 563 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub. 564 * configure: Rebuild. 565 566Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com> 567 568 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h. 569 Delete string{,s}.h support. 570 571Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com> 572 573 * cgen-asm.c (cgen_parse_operand_fn): New global. 574 (cgen_parse_{{,un}signed_integer,address}): Update call to 575 cgen_parse_operand_fn. 576 (cgen_init_parse_operand): New function. 577 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed 578 from cgen_asm_init_parse. 579 (m32r_cgen_assemble_insn): New operand `errmsg'. 580 Delete call to as_bad, return error message to caller. 581 (m32r_cgen_asm_hash_keywords): #if 0 out. 582 583Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> 584 585 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register, 586 not data register. 587 [case 'J']: Fix typo in register name. 588 589Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com> 590 591 * configure.in: Substitute SHLIB_LIBS. 592 * configure: Rebuild. 593 * Makefile.in (SHLIB_LIBS): New variable. 594 ($(SHLIB)): Use $(SHLIB_LIBS). 595 596Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com> 597 598 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation. 599 600 * cgen-opc.c (hash_keyword_name): Improve algorithm. 601 602 * disassemble.c (disassembler): Handle m32r. 603 604Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com> 605 606 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files. 607 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files. 608 * Makefile.in (CFILES): Add them. 609 (ALL_MACHINES): Add them. 610 (dependencies): Regenerate. 611 * configure.in (cgen_files): New variable. 612 (bfd_m32r_arch): Add entry. 613 * configure: Regenerate. 614 615Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com> 616 617 * configure.in: Correct file names for bfd_mn10[23]00_arch. 618 * configure: Rebuild. 619 620 * Makefile.in: Rebuild dependencies. 621 622 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h". 623 624 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and 625 fdivp. 626 627Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com> 628 629 * Branched binutils 2.8. 630 631Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com> 632 633 * m10200-dis.c: Rename from mn10200-dis.c. 634 * m10200-opc.c: Rename from mn10200-opc.c. 635 * m10300-dis.c: Rename from mn10300-dis.c 636 * m10300-opc.c: Rename from mn10300-opc.c. 637 * Makefile.in: Update accordingly. 638 639 * mips16-opc.c: Add mul and dmul macros. 640 641Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de> 642 643 * makefile.vms: Update CFLAGS, add clean target. 644 645Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com> 646 647 * mips-opc.c: Add "wait". From Ralf Baechle 648 <ralf@gnu.ai.mit.edu>. 649 650 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list. 651 * configure, config.in: Rebuild. 652 * sysdep.h: Include <stdlib.h> if it exists. 653 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include 654 <string.h>. 655 * Makefile.in: Rebuild dependencies. 656 657Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com> 658 659 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From 660 Andrew Bray <andy@madhouse.demon.co.uk>. 661 662 * mips-opc.c: Add cast when setting mips_opcodes. 663 664Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com) 665 666 * v850-dis.c (disassemble): Fix sign extension problem. 667 * v850-opc.c (extract_d*): Fix sign extension problems to make 668 disassembly calculate branch offsets correctly. 669 670Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com> 671 672 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s. 673 674 * mips-opc.c: Add dctr and dctw. 675 676Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com> 677 678 * d30v-dis.c (print_insn): Change the way signed constants 679 are displayed. 680 681Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com> 682 683 * Makefile.in (BFD_H): New variable. 684 (HFILES): New variable. 685 (CFILES): Add all C files. 686 (.dep, .dep1, dep.sed, dep, dep-in): New targets. 687 Delete old dependencies, and build new ones. 688 * dep-in.sed: New file. 689 690Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be> 691 692 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}. 693 694Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com) 695 696 * mn10200-opc.c: Change "trap" to "syscall". 697 * mn10300-opc.c: Add new "syscall" instruction. 698 699Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com> 700 701 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and 702 mulul insns on the coldfire. 703 704Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com> 705 706 * arm-dis.c (print_insn_arm): Don't print instruction bytes. 707 (print_insn_big_arm): Set bytes_per_chunk and display_endian. 708 (print_insn_little_arm): Likewise. 709 710Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com> 711 712 Based on patches from H.J. Lu <hjl@lucon.org>: 713 * i386-dis.c (fetch_data): Add prototype. 714 * m68k-dis.c (fetch_data): Add prototype. 715 (dummy_print_address): Add prototype. Make static. 716 * ppc-opc.c (valid_bo): Add prototype. 717 * sparc-dis.c (build_hash_table): Add prototype. 718 (is_delayed_branch, compute_arch_mask): Add prototypes. 719 (print_insn_sparc): Make several local variables const. 720 (compare_opcodes): Change arguments to const PTR. Add prototype. 721 * sparc-opc.c (arg): Change name field to be const. 722 (lookup_name, lookup_value): Add prototypes. Change table and 723 name parameters to be const. 724 (sparc_encode_asi): Change name parameter to be const. 725 (sparc_encode_membar, sparc_encode_prefetch): Likewise. 726 (sparc_encode_sparclet_cpreg): Likewise. 727 (sparc_decode_asi): Change return type to be const. 728 (sparc_decode_membar, sparc_decode_prefetch): Likewise. 729 (sparc_decode_sparclet_cpreg): Likewise. 730 731Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com> 732 733 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since 734 Solaris doesn't like the combined options, and the -f is 735 unnecessary. 736 (stamp-tshlink, install): Likewise. 737 738Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com) 739 740 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these 741 as relaxable. 742 743Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com> 744 745 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010. 746 747Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com> 748 749 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on 750 the mc68000. 751 752Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be> 753 754 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction. 755 756Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com> 757 758 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8. 759 760Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com> 761 762 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly. 763 764Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> 765 766 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use 767 floatformat_to_double to make portable. 768 (print_insn_arg): Use NEXTEXTEND macro when extracting extended 769 precision float. 770 771Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com> 772 773 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes, 774 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes. 775 776Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com> 777 778 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to 779 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt. 780 781Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com> 782 783 * tic80-opc.c (LSI_SCALED): Renamed from this ... 784 (OFF_SL_BR_SCALED): ... to this, and added the flag 785 TIC80_OPERAND_BASEREL to the flags word. 786 (tic80_opcodes): Replace all occurances of LSI_SCALED with 787 OFF_SL_BR_SCALED. 788 789Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com> 790 791 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3. 792 Change mips_opcodes from const array to a pointer, 793 and change bfd_mips_num_opcodes from const int to int, 794 so that we can increase the size of the mips opcodes table 795 dynamically. 796 797Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com> 798 799 * tic80-opc.c (tic80_predefined_symbols): Revert change to 800 store BITNUM values in the table in one's complement form 801 to match behavior when assembler is given a raw numeric 802 value for a BITNUM operand. 803 * tic80-dis.c (print_operand_bitnum): Ditto. 804 805Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com> 806 807 * d30v-opc.c: Removed references to FLAG_X. 808 809Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com> 810 811 * Makefile.in: Add dependencies on ../bfd/bfd.h as required. 812 813Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com> 814 815 * Makefile.in: Added d30v object files. 816 * configure: (bfd_d30v_arch) Rebuilt. 817 * configure.in: (bfd_d30v_arch) Added new case. 818 * d30v-dis.c: New file. 819 * d30v-opc.c: New file. 820 * disassemble.c (disassembler) Add entry for d30v. 821 822Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com> 823 824 * tic80-opc.c (tic80_predefined_symbols): Add symbolic 825 representations for the floating point BITNUM values. 826 827Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com> 828 829 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values 830 in the table in one's complement form, as they appear in the 831 actual instruction. 832 (tic80_symbol_to_value): Use macros to access predefined 833 symbol fields. 834 (tic80_value_to_symbol): Ditto. 835 (tic80_next_predefined_symbol): New function. 836 * tic80-dis.c (print_operand_bitnum): Remove code that did 837 one's complement for BITNUM values. 838 839Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de> 840 841 * makefile.vms: Remove 8 bit characters. Update to latest 842 gcc release. 843 844Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be> 845 846 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction. 847 848Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com) 849 850 * mn10200-opc.c (IMM16_PCREL): This is a signed operand. 851 (IMM24_PCREL): Likewise. 852 853Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com> 854 855 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base 856 address for an extended PC relative instruction that is not a 857 branch. 858 859Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> 860 861 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and 862 bytes_per_line. 863 864Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com> 865 866 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'. 867 (tic80_opcodes): Sort entries so that long immediate forms 868 come after short immediate forms, making it easier for 869 assembler to select the right one for a given operand. 870 871Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com> 872 873 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and 874 display_endian. 875 (print_insn_mips16): Likewise. 876 877Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com> 878 879 * tic80-opc.c (tic80_symbol_to_value): Changed to accept 880 a symbol class that restricts translation to just that 881 class (general register, condition code, etc). 882 883Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com> 884 885 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E, 886 and REG_DEST_E for register operands that have to be 887 an even numbered register. Add REG_FPA for operands that 888 are one of the floating point accumulator registers. 889 Add TIC80_OPERAND_MASK to flags for ENDMASK operand. 890 (tic80_opcodes): Change entries that need even numbered 891 register operands to use the new operand table entries. 892 Add "or" entries that are identical to "or.tt" entries. 893 894Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com> 895 896 * mips16-opc.c: Add new cases of exit instruction for 897 disassembler. 898 * mips-dis.c (print_mips16_insn_arg): Display floating point 899 registers in operands of exit instruction. Print `$' before 900 register names in operands of entry and exit instructions. 901 902Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com> 903 904 * tic80-opc.c (tic80_predefined_symbols): Table of name/value 905 pairs for all predefined symbols recognized by the assembler. 906 Also used by the disassembling routines. 907 (tic80_symbol_to_value): New function. 908 (tic80_value_to_symbol): New function. 909 * tic80-dis.c (print_operand_control_register, 910 print_operand_condition_code, print_operand_bitnum): 911 Remove private tables and use tic80_value_to_symbol function. 912 913Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com> 914 915 * d10v-dis.c (print_operand): Change address printing 916 to correctly handle PC wrapping. Fixes PR11490. 917 918Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com) 919 920 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative 921 branches relaxable. 922 923Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com> 924 925 * mips-dis.c (print_insn_mips16): Set insn_info information. 926 (print_mips16_insn_arg): Likewise. 927 928 * mips-dis.c (print_insn_mips16): Better handling of an extend 929 opcode followed by an instruction which can not be extended. 930 931Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com> 932 933 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the 934 coldfire moveb instruction to not allow an address register as 935 destination. Although the documentation does not indicate that 936 this is invalid, experiments uncovered unexpected behavior. 937 Added a comment explaining the situation. Thanks to Andreas 938 Schwab for pointing this out to me. 939 940Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com> 941 942 * tic80-opc.c (tic80_opcodes): Expand comment to note that the 943 entries are presorted so that entries with the same mnemonic are 944 adjacent to each other in the table. Sort the entries for each 945 instruction so that this is true. 946 947Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> 948 949 * m68k-dis.c: Include <libiberty.h>. 950 (print_insn_m68k): Sort the opcode table on the most significant 951 nibble of the opcode. 952 953Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com> 954 955 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd", 956 "vsub", "vst", "xnor", and "xor" instructions. 957 (V_a1): Renamed from V_a, msb of accumulator reg number. 958 (V_a0): Add macro, lsb of accumulator reg number. 959 960Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com> 961 962 * tic80-dis.c (print_insn_tic80): Broke excessively long 963 function up into several smaller ones and arranged for 964 the instruction printing function to be callable recursively 965 to print vector instructions that have both a load and a 966 math instruction packed into a single opcode. 967 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode 968 to explain why it comes after the other vector opcodes. 969 970Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com> 971 972 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire 973 move insns to handle immediate operands. 974 975Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> 976 977 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil". 978 fix operand mask in the "moveml" entries for the coldfire. 979 980Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com> 981 982 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V): 983 New macros for building vector instruction opcodes. 984 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and 985 FMT_LI, which were unused. The field is now a flags field. 986 Remove some opcodes that are possible, but illegal, such 987 as long immediate instructions with doubles for immediate 988 values. Add "vadd" and "vld" instructions. 989 990Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com> 991 992 * tic80-opc.c (tic80_operands): Reorder some table entries to make 993 the order more logical. Move the shift alias instructions ("rotl", 994 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be 995 interspersed with the regular sr.x and sl.x instructions. Add 996 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st", 997 "sub", "subu", "swcr", and "trap". 998 999Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com> 1000 1001 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS. 1002 (OFF_SL_PC): Renamed from OFF_SL. 1003 (OFF_SS_BR): New operand type for base relative operand. 1004 (OFF_SL_BR): New operand type for base relative operand. 1005 (REG_BASE): New operand type for base register operand. 1006 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp", 1007 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr", 1008 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr" 1009 instructions. 1010 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width 1011 10 char field, padded with spaces on rhs, rather than a string 1012 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather 1013 than old TIC80_OPERAND_RELATIVE. Add support for new 1014 TIC80_OPERAND_BASEREL flag bit. 1015 1016Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com> 1017 1018 * tic80-dis.c (print_insn_tic80): Print floating point operands 1019 as floats. 1020 * tic80-opc.c (SPFI): Add single precision floating point 1021 immediate operand type. 1022 (ROTATE): Add rotate operand type for shifts. 1023 (ENDMASK): Add for shifts. 1024 (n): Macro for the 'n' bit. 1025 (i): Macro for the 'i' bit. 1026 (PD): Macro for the 'PD' field. 1027 (P2): Macro for the 'P2' field. 1028 (P1): Macro for the 'P1' field. 1029 (tic80_opcodes): Add entries for "exts", "extu", "fadd", 1030 "fcmp", and "fdiv". 1031 1032Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com) 1033 1034 * mn10200-dis.c (disassemble): Mask off unwanted bits after 1035 adding in current address for pc-relative operands. 1036 1037Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com> 1038 1039 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit. 1040 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand. 1041 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names 1042 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively. 1043 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI, 1044 REG_BASE_M_SI, REG_BASE_M_LI respectively. 1045 (REG_SCALED, LSI_SCALED): New operand types. 1046 (E): New macro for 'E' bit at bit 27. 1047 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap 1048 opcodes, including the various size flavors (b,h,w,d) for 1049 the direct load and store instructions. 1050 1051Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com> 1052 1053 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit 1054 in an instruction. 1055 * tic80-dis.c (print_insn_tic80): Change comma and paren handling. 1056 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands. 1057 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands. 1058 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers. 1059 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode 1060 masks with "MASK_* & ~M_*" to get the M bit reset. 1061 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef. 1062 1063Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com> 1064 1065 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE 1066 correctly. Add support for printing TIC80_OPERAND_BITNUM and 1067 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic 1068 form. 1069 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM, 1070 CC, SICR, and LICR table entries. 1071 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz", 1072 "bcnd", and "brcr" opcodes. 1073 1074Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com> 1075 1076 * ppc-opc.c (powerpc_operands): Make comment match the 1077 actual fields (no shift field). 1078 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const". 1079 * tic80-dis.c (print_insn_tic80): Replace abort stub with a 1080 partial implementation, work in progress. 1081 * tic80-opc.c (tic80_operands): Begin construction operands table. 1082 (tic80_opcodes): Continue populating opcodes table and start 1083 filling in the operand indices. 1084 (tic80_num_opcodes): Add this. 1085 1086Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com> 1087 1088 * m68k-opc.c: Add #B case for moveq. 1089 1090Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com) 1091 1092 * mn10300-dis.c (disassemble): Make sure all variables are initialized 1093 before they are used. 1094 1095Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com) 1096 1097 * v850-opc.c (v850_opcodes): Put curly-braces around operands 1098 for "breakpoint" instruction. 1099 1100Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com> 1101 1102 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE. 1103 (dep): Use ALL_CFLAGS rather than CFLAGS. 1104 1105Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com> 1106 1107 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY 1108 flag. 1109 1110Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com> 1111 1112 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency. 1113 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in. 1114 1115Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com> 1116 1117 * mips16-opc.c: Add "abs". 1118 1119Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com> 1120 1121 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o. 1122 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined. 1123 (disassembler): Add bfd_arch_tic80 support to set disassemble 1124 to print_insn_tic80. 1125 * tic80-dis.c (print_insn_tic80): Add stub. 1126 1127Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com> 1128 1129 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry. 1130 * configure: Regenerate with autoconf. 1131 * tic80-dis.c: Add file. 1132 * tic80-opc.c: Add file. 1133 1134Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1135 1136 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link. 1137 1138Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com) 1139 1140 * mn10200-opc.c (mn10200_operands): Add SIMM16N. 1141 (mn10200_opcodes): Use it for some logicals and btst insns. 1142 Add "break" and "trap" instructions. 1143 1144 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction. 1145 1146 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)". 1147 1148Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com> 1149 1150 * mips-dis.c (print_mips16_insn_arg): The base address of a PC 1151 relative load or add now depends upon whether the instruction is 1152 in a delay slot. 1153 1154Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com) 1155 1156 * mn10200-dis.c: Finish writing disassembler. 1157 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn". 1158 Fix mask for "jmp (an)". 1159 1160 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently 1161 handle endianness issues for mn10300. 1162 1163 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)". 1164 1165Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com) 1166 1167 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2 1168 instruction. Fix opcode field for "movb (imm24),dn". 1169 1170 * mn10200-opc.c (mn10200_operands): Fix insertion position 1171 for DI operand. 1172 1173Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com) 1174 1175 * mn10200-opc.c: Create mn10200 opcode table. 1176 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready, 1177 but moving along nicely. 1178 1179Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) 1180 1181 * Makefile.in (ALL_MACHINES): Add mips16-opc.o. 1182 1183Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com> 1184 1185 * m68k-opc.c (m68k_opcodes): Revert change to use < and > 1186 specifiers for fmovem* instructions. 1187 1188Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com) 1189 1190 * mn10300-dis.c (disassemble): Remove '$' register prefixing. 1191 1192Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com> 1193 1194 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting 1195 with dsrl. 1196 1197Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com) 1198 1199 * mn10300-opc.c: Add some comments explaining the various 1200 operands and such. 1201 1202 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings. 1203 1204Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com> 1205 1206 * m68k-dis.c (print_insn_arg): Handle new < and > operand 1207 specifiers. 1208 1209 * m68k-opc.c (m68k_opcodes): Simplify table by using < and > 1210 operand specifiers in fmovm* instructions. 1211 1212Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com> 1213 1214 * ppc-opc.c (insert_li): Give an error if the offset has the two 1215 least significant bits set. 1216 1217Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com> 1218 1219 * mips-dis.c (print_insn_mips16): Separate the instruction from 1220 the arguments with a tab, not a space. 1221 1222Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com) 1223 1224 * mn10300-dis.c (disasemble): Finish conversion to '$' as 1225 register prefix. 1226 1227 * mn10300-opc.c (mn10300_opcodes): Fix mask field for 1228 mov am,(imm32,sp). 1229 1230Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com> 1231 1232 * configure: Rebuild with autoconf 2.12. 1233 1234 Add support for mips16 (16 bit MIPS implementation): 1235 * mips16-opc.c: New file. 1236 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h". 1237 (mips16_reg_names): New static array. 1238 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or 1239 after seeing a 16 bit symbol. 1240 (print_insn_little_mips): Likewise. 1241 (print_insn_mips16): New static function. 1242 (print_mips16_insn_arg): New static function. 1243 * mips-opc.c: Add jalx instruction. 1244 * Makefile.in (mips16-opc.o): New target. 1245 * configure.in: Use mips16-opc.o for bfd_mips_arch. 1246 * configure: Rebuild. 1247 1248Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com> 1249 1250 * m68k-opc.c (m68k_opcodes): Simplify table by using < and > 1251 operand specifiers in *save, *restore and movem* instructions. 1252 1253 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for 1254 the coldfire. 1255 1256 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use 1257 register operands for immediate arithmetic, not, neg, negx, and 1258 set according to condition instructions. 1259 1260 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage 1261 specifier of the effective-address operand in immediate forms of 1262 arithmetic instructions. The specifier for the immediate operand 1263 notes how and where the constant will be stored. 1264 1265Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com) 1266 1267 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc" 1268 opcode. 1269 1270 * mn10300-dis.c (disassemble): Use '$' instead of '%' for 1271 register prefix. 1272 1273 * mn10300-dis.c (disassemble): Prefix registers with '%'. 1274 1275Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com) 1276 1277 * mn10300-dis.c (disassemble): Handle register lists. 1278 1279 * mn10300-opc.c: Fix handling of register list operand for 1280 "call", "ret", and "rets" instructions. 1281 1282 * mn10300-dis.c (disassemble): Print PC-relative and memory 1283 addresses symbolically if possible. 1284 * mn10300-opc.c: Distinguish between absolute memory addresses, 1285 pc-relative offsets & random immediates. 1286 1287 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte 1288 in 7 byte insns. 1289 (disassemble): Handle SPLIT and EXTENDED operands. 1290 1291Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com) 1292 1293 * mn10300-dis.c: Rough cut at printing some operands. 1294 1295 * mn10300-dis.c: Start working on disassembler support. 1296 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns. 1297 1298 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register 1299 list. 1300 (mn10300_opcodes): Use REGS for register list in "movm" instructions. 1301 1302Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com> 1303 1304 * d10v-opc.c (d10v_opcodes): Add3 sets the carry. 1305 1306Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com) 1307 1308 * mn10300-opc.c (mn10300_opcodes): Demand parens around 1309 register argument is calls and jmp instructions. 1310 1311Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com) 1312 1313 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and 1314 getx operand. Fix opcode for mulqu imm,dn. 1315 1316Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com) 1317 1318 * mn10300-opc.c (mn10300_operands): Hijack "bits" field 1319 in MN10300_OPERAND_SPLIT operands for how many bits 1320 appear in the basic insn word. Add IMM32_HIGH24, 1321 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8. 1322 (mn10300_opcodes): Use new operands as needed. 1323 1324 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8 1325 for bset, bclr, btst instructions. 1326 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed. 1327 1328 * mn10300-opc.c (mn10300_operands): Remove many redundant 1329 operands. Update opcode table as appropriate. 1330 (IMM32): Add MN10300_OPERAND_SPLIT flag. 1331 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn. 1332 1333Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com) 1334 1335 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2 1336 operands (for indexed load/stores). Fix bitpos for DI 1337 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the 1338 few instructions that insert immediates/displacements in the 1339 middle of the instruction. Add IMM8E for 8 bit immediate in 1340 the extended part of an instruction. 1341 (mn10300_operands): Use new opcodes as appropriate. 1342 1343Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1344 1345 * d10v-opc.c (d10v_opcodes): Declare the trap instruction 1346 sequential so the assembler never parallelizes it with 1347 other instructions. 1348 1349Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com) 1350 1351 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for 1352 a data/address register that appears in register field 0 1353 and register field 1. 1354 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN 1355 1356Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu> 1357 1358 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for 1359 standard disassembly. 1360 1361 * alpha-opc.c (alpha_operands): Rearrange flags slot. 1362 (alpha_opcodes): Add new BWX, CIX, and MAX instructions. 1363 Recategorize PALcode instructions. 1364 1365Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com) 1366 1367 * v850-opc.c (v850_opcodes): Add relaxing "jbr". 1368 1369Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com> 1370 1371 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if 1372 there are no operand types. 1373 1374Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com) 1375 1376 * v850-opc.c (D9_RELAX): Renamed from D9, all references 1377 changed. 1378 (v850_operands): Make sure D22 immediately follows D9_RELAX. 1379 1380Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com> 1381 1382 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5. 1383 1384Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com) 1385 1386 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w 1387 and sst.w instructions. 1388 1389 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for 1390 "bCC"instructions). 1391 1392Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com> 1393 1394 * mips-dis.c (_print_insn_mips): Use a tab between the instruction 1395 and the arguments. 1396 1397Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com> 1398 1399 * ppc-opc.c (PPCPWR2): Define. 1400 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating 1401 it. 1402 1403Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com) 1404 1405 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode 1406 field for movhu instruction. 1407 1408 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands, 1409 cast value to "long" not "signed long" to keep hpux10 1410 compiler quiet. 1411 1412Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com) 1413 1414 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field 1415 for mov (abs16),DN. 1416 1417 * mn10300-opc.c (FMT*): Remove definitions. 1418 1419 * mn10300-opc.c (mn10300_opcodes): Fix destination register 1420 for shift-by-register opcodes. 1421 1422 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM 1423 into [AD][MN][01] for encoding the position of the register 1424 in the opcode. 1425 1426Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com) 1427 1428 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions, 1429 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch". 1430 1431Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com) 1432 1433 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand. 1434 Fix various typos. Add "PAREN" operand. 1435 (MEM, MEM2): Define. 1436 (mn10300_opcodes): Surround all memory addresses with "PAREN" 1437 operands. Fix several typos. 1438 1439 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's 1440 changes. 1441 1442Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com) 1443 1444 * mn10300-opc.c (FMT_XX): Renumber starting at one. 1445 (mn10300_operands): Rough cut. Enough to parse "mov" instructions 1446 at this time. 1447 (mn10300_opcodes): Break opcode format out into its own field. 1448 Update many operand fields to deal with signed vs unsigned 1449 issues. Fix one or two typos in the "mov" instruction 1450 opcode, mask and/or operand fields. 1451 1452Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> 1453 1454 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case 1455 m68851 wasn't reset. 1456 1457Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com> 1458 1459 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for 1460 all opcodes. Very rough cut at operands for all opcodes. 1461 1462 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the 1463 opcode table. 1464 1465Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com) 1466 1467 * mn10200-opc.c, mn10300-opc.c: New files. 1468 * mn10200-dis.c, mn10300-dis.c: New files. 1469 * mn10x00-opc.c, mn10x00-dis.c: Deleted. 1470 * disassemble.c: Break mn10x00 support into 10200 and 10300 1471 support. 1472 * configure.in: Likewise. 1473 * configure: Rebuilt. 1474 1475Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) 1476 1477 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean. 1478 1479Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com) 1480 1481 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita 1482 MN10x00 processors. 1483 * disassemble.c (ARCH_mn10x00): Define. 1484 (disassembler): Handle bfd_arch_mn10x00. 1485 * configure.in: Recognize bfd_mn10x00_arch. 1486 * configure: Rebuilt. 1487 1488Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com> 1489 1490 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses 1491 accordingly. Don't declare functions using op_rtn. 1492 1493Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com) 1494 1495 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange 1496 params to be more standard. 1497 * (disassemble): Print absolute addresses and symbolic names for 1498 branch and jump targets. 1499 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22 1500 bit operands. 1501 * (v850_opcodes): Add breakpoint insn. 1502 1503Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com> 1504 1505 * m68k-opc.c: Move the fmovemx data register cases before the 1506 other cases, so that they get recognized before the data register 1507 does gets treated as a degenerate register list. 1508 1509Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com> 1510 1511 * mips-opc.c: Add a case for "div" and "divu" with two registers 1512 and a destination of $0. 1513 1514Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com> 1515 1516 * mips-dis.c (print_insn_arg): Add prototype. 1517 (_print_insn_mips): Ditto. 1518 1519Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com> 1520 1521 * mips-dis.c (print_insn_arg): Print condition code registers as 1522 $fccN. 1523 1524Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com> 1525 1526 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx. 1527 1528Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com) 1529 1530 * v850-dis.c (disassemble): Make static. Provide prototype. 1531 1532Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com) 1533 1534 * v850-opc.c (insert_d9, insert_d22): Fix boundary case 1535 in range checks. 1536 1537Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com) 1538 1539 * v850-dis.c (disassemble): Handle insertion of ',', '[' and 1540 ']' characters into the output stream. 1541 * v850-opc.c (v850_opcodes: Remove size field from all opcodes. 1542 Add "memop" field to all opcodes (for the disassembler). 1543 Reorder opcodes so that "nop" comes before "mov" and "jr" 1544 comes before "jarl". 1545 1546 * v850-dis.c (print_insn_v850): Fix typo in last change. 1547 1548 * v850-dis.c (print_insn_v850): Properly handle disassembling 1549 a two byte insn at the end of a memory region when the memory 1550 region's size is only two byte aligned. 1551 1552 * v850-dis.c (v850_cc_names): Fix stupid thinkos. 1553 1554 * v850-dis.c (v850_reg_names): Define. 1555 (v850_sreg_names, v850_cc_names): Likewise. 1556 (disassemble): Very rough cut at printing operands (unformatted). 1557 1558 * v850-opc.c (BOP_MASK): Fix. 1559 (v850_opcodes): Fix mask for jarl and jr. 1560 1561 * v850-dis.c: New file. Skeleton for disassembler support. 1562 * Makefile.in Remove v850 references, they're not needed here. 1563 * configure.in: Add v850-dis.o when building v850 toolchains. 1564 * configure: Rebuilt. 1565 * disassemble.c (disassembler): Call v850 disassembler. 1566 1567 * v850-opc.c (insert_d8_7, extract_d8_7): New functions. 1568 (insert_d8_6, extract_d8_6): New functions. 1569 (v850_operands): Rename D7S to D7; operand for D7 is unsigned. 1570 Rename D8 to D8_7, use {insert,extract}_d8_7 routines. 1571 Add D8_6. 1572 (IF4A, IF4B): Use "D7" instead of "D7S". 1573 (IF4C, IF4D): Use "D8_7" instead of "D8". 1574 (IF4E, IF4F): New. Use "D8_6". 1575 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for 1576 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w. 1577 1578 * v850-opc.c (insert_d16_15, extract_d16_15): New functions. 1579 (v850_operands): Change D16 to D16_15, use special insert/extract 1580 routines. New new D16 that uses the generic insert/extract code. 1581 (IF7A, IF7B): Use D16_15. 1582 (IF7C, IF7D): New. Use D16. 1583 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b. 1584 1585 * v850-opc.c (insert_d9, insert_d22): Slightly improve error 1586 message. Issue an error if the branch offset is odd. 1587 1588 * v850-opc.c: Add notes about needing special insert/extract 1589 for all the load/store insns, except "ld.b" and "st.b". 1590 1591 * v850-opc.c (insert_d22, extract_d22): New functions. 1592 (v850_operands): Use insert_d22 and extract_d22 for 1593 D22 operands. 1594 (insert_d9): Fix range check. 1595 1596Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com> 1597 1598 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag 1599 and set bits field to D9 and D22 operands. 1600 1601Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com) 1602 1603 * v850-opc.c (v850_operands): Define SR2 operand. 1604 (v850_opcodes): "ldsr" uses R1,SR2. 1605 1606 * v850-opc.c (v850_opcodes): Fix opcode specs for 1607 sld.w, sst.b, sst.h, sst.w, and nop. 1608 1609Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com) 1610 1611 * v850-opc.c (v850_opcodes): Add null opcode to mark the 1612 end of the opcode table. 1613 1614Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1615 1616 * d10v-opc.c (pre_defined_registers): Added register pairs, 1617 "r0-r1", "r2-r3", etc. 1618 1619Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com) 1620 1621 * v850-opc.c (v850_operands): Make I16 be a signed operand. 1622 Create I16U for an unsigned 16bit mmediate operand. 1623 (v850_opcodes): Use I16U for "ori", "andi" and "xori". 1624 1625 * v850-opc.c (v850_operands): Define EP operand. 1626 (IF4A, IF4B, IF4C, IF4D): Use EP. 1627 1628 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov" 1629 with immediate operand, "movhi". Tweak "ldsr". 1630 1631 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw] 1632 correct. Get sld.[bhw] and sst.[bhw] closer. 1633 1634 * v850-opc.c (v850_operands): "not" is a two byte insn 1635 1636 * v850-opc.c (v850_opcodes): Correct bit pattern for setf. 1637 1638 * v850-opc.c (v850_operands): D16 inserts at offset 16! 1639 1640 * v850-opc.c (two): Get order of words correct. 1641 1642 * v850-opc.c (v850_operands): I16 inserts at offset 16! 1643 1644 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system 1645 register source and destination operands. 1646 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr". 1647 1648 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix 1649 same thinko in "trap" opcode. 1650 1651 * v850-opc.c (v850_opcodes): Add initializer for size field 1652 on all opcodes. 1653 1654 * v850-opc.c (v850_operands): D6 -> DS7. References changed. 1655 Add D8 for 8-bit unsigned field in short load/store insns. 1656 (IF4A, IF4D): These both need two registers. 1657 (IF4C, IF4D): Define. Use 8-bit unsigned field. 1658 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use 1659 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand 1660 for "ldsr" and "stsr". 1661 * v850-opc.c (v850_operands): 3-bit immediate for bit insns 1662 is unsigned. 1663 1664 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and 1665 short store word (sst.w). 1666 1667Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com> 1668 1669 * v850-opc.c (v850_operands): Added insert and extract fields, 1670 pointers to functions that handle unusual operand encodings. 1671 1672Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com) 1673 1674 * v850-opc.c (v850_opcodes): Enable "trap". 1675 1676 * v850-opc.c (v850_opcodes): Fix order of displacement 1677 and register for "set1", "clr1", "not1", and "tst1". 1678 1679Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com) 1680 1681 * v850-opc.c (v850_operands): Add "B3" support. 1682 (v850_opcodes): Fix and enable "set1", "clr1", "not1" 1683 and "tst1". 1684 1685 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand. 1686 1687 * v850-opc.c: Close unterminated comment. 1688 1689Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com> 1690 1691 * v850-opc.c (v850_operands): Add flags field. 1692 (v850_opcodes): add move opcodes. 1693 1694Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com> 1695 1696 * Makefile.in (ALL_MACHINES): Add v850-opc.o. 1697 * configure: (bfd_v850v_arch) Add new case. 1698 * configure.in: (bfd_v850_arch) Add new case. 1699 * v850-opc.c: New file. 1700 1701Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com> 1702 1703 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs. 1704 1705Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1706 1707 * d10v-opc.c: Add additional information to the opcode 1708 table to help determinine which instructions can be done 1709 in parallel. 1710 1711Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com> 1712 1713 * mpw-make.sed: Update editing of include pathnames to be 1714 more general. 1715 1716Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk> 1717 1718 * arm-opc.h: Added "bx" instruction definition. 1719 1720Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu> 1721 1722 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5. 1723 1724Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1725 1726 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l. 1727 1728Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1729 1730 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER. 1731 1732Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de> 1733 1734 * makefile.vms: Update for alpha-opc changes. 1735 1736Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com> 1737 1738 * i386-dis.c (print_insn_i386): Actually return the correct value. 1739 (ONE, OP_ONE): #ifdef out; not used. 1740 1741Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1742 1743 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions. 1744 Changed subi operand type to treat 0 as 16. 1745 1746Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com> 1747 1748 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose 1749 <rose@netcom.com>. 1750 1751Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk> 1752 1753 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension 1754 memory transfer instructions. Add new format string entries %h and %s. 1755 * arm-dis.c: (print_insn_arm): Provide decoding of the new 1756 formats %h and %s. 1757 1758Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1759 1760 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift. 1761 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S. 1762 1763Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com> 1764 1765 * alpha-dis.c (print_insn_alpha_osf): Remove. 1766 (print_insn_alpha_vms): Remove. 1767 (print_insn_alpha): Make globally visible. Chose the register 1768 names based on info->flavour. 1769 * disassemble.c: Always return print_insn_alpha for the alpha. 1770 1771Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1772 1773 * d10v-dis.c (dis_long): Handle unknown opcodes. 1774 1775Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1776 1777 * d10v-opc.c: Changes to support signed and unsigned numbers. 1778 All instructions with the same name that have long and short forms 1779 now end in ".l" or ".s". Divs added. 1780 * d10v-dis.c: Changes to support signed and unsigned numbers. 1781 1782Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1783 1784 * d10v-dis.c: Change all functions to use info->print_address_func. 1785 1786Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> 1787 1788 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire 1789 move ccr/sr insns more strict so that the disassembler only 1790 selects them when the addressing mode is data register. 1791 1792Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1793 * d10v-opc.c (pre_defined_registers): Declare. 1794 * d10v-dis.c (print_operand): Now uses pre_defined_registers 1795 to pick a better name for the registers. 1796 1797Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com> 1798 1799 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix 1800 operands for fexpand and fpmerge. From Christian Kuehnke 1801 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>. 1802 1803Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu> 1804 1805 * alpha-dis.c (print_insn_alpha): No longer the user-visible 1806 print routine. Take new regnames and cpumask arguments. 1807 Kill the environment variable nonsense. 1808 (print_insn_alpha_osf): New function. Do OSF/1 style regnames. 1809 (print_insn_alpha_vms): New function. Do VMS style regnames. 1810 * disassemble.c (disassembler): Test bfd flavour to pick 1811 between OSF and VMS routines. Default to OSF. 1812 1813Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com> 1814 1815 * configure.in: Call AC_SUBST (INSTALL_SHLIB). 1816 * configure: Rebuild. 1817 * Makefile.in (install): Use @INSTALL_SHLIB@. 1818 1819Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com> 1820 1821 * configure: (bfd_d10v_arch) Add new case. 1822 * configure.in: (bfd_d10v_arch) Add new case. 1823 * d10v-dis.c: New file. 1824 * d10v-opc.c: New file. 1825 * disassemble.c (disassembler) Add entry for d10v. 1826 1827Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com> 1828 1829 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating 1830 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab. 1831 1832Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com) 1833 1834 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to 1835 distinguish between variants of the instruction set. 1836 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to 1837 distinguish between variants of the instruction set. 1838 1839Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com) 1840 1841 * i386-dis.c (print_insn_i8086): New routine to disassemble using 1842 the 8086 instruction set. 1843 * i386-dis.c: General cleanups. Make most things static. Add 1844 prototypes. Get rid of static variables aflags and dflags. Pass 1845 them as args (to almost everything). 1846 1847Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com) 1848 1849 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns. 1850 1851 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l". 1852 1853 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two 1854 if the next arg is marked with SRC_IN_DST. Gross. 1855 1856 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when 1857 we're looking for and find EXR. 1858 1859 * h8300-dis.c (bfd_h8_disassemble): We don't have a match 1860 if we're looking for KBIT and we don't find it. 1861 1862 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits 1863 for L_3 and L_2. 1864 1865 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for 1866 3bit immediate operands. 1867 1868Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com> 1869 1870 * Released binutils 2.7. 1871 1872 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf 1873 <kkaempf@progis.ac-net.de>. 1874 1875Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com> 1876 1877 * alpha-opc.c: Correct second case of "mov" to use OPRL. 1878 1879Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com) 1880 1881 * sparc-dis.c (print_insn_sparclite): New routine to print 1882 sparclite instructions. 1883 1884Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com> 1885 1886 * m68k-opc.c (m68k_opcodes): Add coldfire support. 1887 1888Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com> 1889 1890 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS, 1891 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L 1892 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE. 1893 1894Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) 1895 1896 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir): 1897 Use autoconf-set values. 1898 (docdir, oldincludedir): Removed. 1899 * configure.in (AC_PREREQ): autoconf 2.5 or higher. 1900 1901Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu> 1902 1903 * alpha-opc.c: New file. 1904 * alpha-opc.h: Remove. 1905 * alpha-dis.c: Complete rewrite to use new opcode table. 1906 * configure.in: For bfd_alpha_arch, use alpha-opc.o. 1907 * configure: Rebuild with autoconf 2.10. 1908 * Makefile.in (ALL_MACHINES): Add alpha-opc.o. 1909 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not 1910 alpha-opc.h. 1911 (alpha-opc.o): New target. 1912 1913Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com> 1914 1915 * sparc-dis.c (print_insn_sparc): Remove unused local variable i. 1916 Set imm_added_to_rs1 even if the source and destination register 1917 are not the same. 1918 1919 * sparc-opc.c: Add some two operand forms of the wr instruction. 1920 1921Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com> 1922 1923 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument 1924 to just "mode". 1925 1926 * disassemble.c (disassembler): Handle H8/S. 1927 * h8300-dis.c (print_insn_h8300s): New function for H8/S. 1928 1929Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com> 1930 1931 * sparc-opc.c: Add beq/teq as aliases for be/te. 1932 1933 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko 1934 <sergei@msil.sps.mot.com>. 1935 1936Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de> 1937 1938 * makefile.vms: New file. 1939 1940 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov. 1941 1942Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com> 1943 1944 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8, 1945 regardless of plen. 1946 1947Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com> 1948 1949 * i386-dis.c (OP_OFF): Call append_prefix. 1950 1951Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com> 1952 1953 * ppc-opc.c (instruction encoding macros): Add explicit casts to 1954 unsigned long to silence a warning from the Solaris PowerPC 1955 compiler. 1956 1957Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com> 1958 1959 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions. 1960 1961Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com> 1962 1963 * sparc-dis.c (X_IMM,X_SIMM): New macros. 1964 (X_IMM13): Delete. 1965 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y. 1966 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants, 1967 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt, 1968 cpush, cpusha, cpull sparclet insns. 1969 1970Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com> 1971 1972 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R. 1973 1974Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com> 1975 1976 * sparc-opc.c: Set F_FBR on floating point branch instructions. 1977 Set F_FLOAT on other floating point instructions. 1978 1979Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com> 1980 1981 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and 1982 registers. 1983 (powerpc_opcodes): Add 860/821 specific SPRs. 1984 1985Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com> 1986 1987 * configure.in: Permit --enable-shared to specify a list of 1988 directories. Set and substitute BFD_PICLIST. 1989 * configure: Rebuild. 1990 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all 1991 uses. Set to @BFD_PICLIST@. 1992 1993Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com) 1994 1995 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates, 1996 not "abs", which may be needed for the absolute in something 1997 like btst #0,@10:8. Print L_3 immediates separately from other 1998 immediates. Change ABSMOV reference to ABS8MEM. 1999 2000Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com> 2001 2002 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc. 2003 (current_arch_mask): New static global. 2004 (compute_arch_mask): New static function. 2005 (print_insn_sparc): Delete sparc_v9_p. New static local 2006 current_mach. Resort opcode table if current_mach changes. 2007 Generalize "insn not supported" test. 2008 (compare_opcodes): Prefer supported opcodes to nonsupported ones. 2009 Delete test for v9/!v9. 2010 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK. 2011 (v6notlet): Define. 2012 (brfc): Split into CBR and FBR for coprocessor/fp branches. 2013 (brfcx): Renamed to FBRX. 2014 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard 2015 coprocessor mnemonics are not supported on the sparclet). 2016 (condf): Renamed to CONDF. 2017 (SLCBCC2): Delete F_ALIAS flag. 2018 2019Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com> 2020 2021 * sparc-opc.c (sparc_opcodes): rd must be 0 for 2022 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX. 2023 2024Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com> 2025 2026 * Makefile.in (config.status): Depend upon BFD VERSION file, so 2027 that the shared library version number is set correctly. 2028 2029Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com> 2030 2031 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From 2032 Miles Bader <miles@gnu.ai.mit.edu>. 2033 * configure: Rebuild. 2034 2035Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com> 2036 2037 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked 2038 malloc. 2039 2040Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com> 2041 2042 * configure: Rebuild with autoconf 2.8. 2043 2044Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com> 2045 2046 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'. 2047 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'. 2048 2049Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com> 2050 2051 * configure.in: Don't set SHLIB or SHLINK to an empty string, 2052 since they appear as targets in Makefile.in. 2053 * configure: Rebuild. 2054 2055Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com> 2056 2057 * mpw-make.sed: Edit out shared library support bits. 2058 2059Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com> 2060 2061 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET. 2062 (sparc_opcode_archs): Add MASK_V8 to sparclet entry. 2063 (sparc_opcodes): Add sparclet insns. 2064 (sparclet_cpreg_table): New static local. 2065 (sparc_{encode,decode}_sparclet_cpreg): New functions. 2066 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs. 2067 2068Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au> 2069 2070 * i386-dis.c (index16): New static variable. 2071 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the 2072 other way around. 2073 (OP_indirE): Return result of OP_E. 2074 (OP_E): Check for 16 bit addressing mode, and disassemble 2075 correctly. Optimised 32 bit case a little. Don't print 2076 "(base,index,scale)" when sib specifies only an offset. 2077 2078Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com> 2079 2080 * configure.in: Set and substitute SHLIB_DEP. 2081 * configure: Rebuild. 2082 * Makefile.in (SHLIB_DEP): New variable. 2083 (LIBIBERTY_LISTS, BFD_LIST): New variables. 2084 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If 2085 COMMON_SHLIB, add them to piclist with appropriate modifications. 2086 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB 2087 here: just use piclist. 2088 2089Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com> 2090 2091 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define. 2092 (print_insn_sparc): Rewrite v9/not-v9 tests. 2093 (compare_opcodes): Likewise. 2094 * sparc-opc.c (MASK_<ARCH>): Define. 2095 (v6,v7,v8,sparclite,v9,v9a): Redefine. 2096 (sparclet,v6notv9): Define. 2097 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'. 2098 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead. 2099 2100Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com> 2101 2102 * configure.in: Call AC_PROG_CC before configure.host. 2103 * configure: Rebuild. 2104 2105 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB). 2106 2107Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au> 2108 2109 * i386-dis.c (onebyte_has_modrm): New static array. 2110 (twobyte_has_modrm): New static array. 2111 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed. 2112 2113Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com> 2114 2115 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not 2116 $(SHLINK). 2117 2118Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com> 2119 2120 * ppc-opc.c (PPC): Undef, so default defination on Windows NT 2121 doesn't conflict. 2122 2123Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com> 2124 2125 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on 2126 m68010up, not just m68020up | cpu32. 2127 2128 * Makefile.in (SONAME): New variable. 2129 ($(SHLINK)): Make a link to the transformed name, as well. 2130 (stamp-tshlink): New target. 2131 (install): Skip stamp-tshlink during install. 2132 2133Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com> 2134 2135 * configure.in: Call AC_ARG_PROGRAM. 2136 * configure: Rebuild. 2137 * Makefile.in (program_transform_name): New variable. 2138 (install): Transform library name before installing it. 2139 2140Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com> 2141 2142 * i960-dis.c (mem): Add HX dcinva instruction. 2143 2144 Support for building as a shared library, based on patches from 2145 Alan Modra <alan@spri.levels.unisa.edu.au>: 2146 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib. 2147 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC, 2148 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK. 2149 * configure: Rebuild. 2150 * Makefile.in (ALLLIBS): New variable. 2151 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables. 2152 (COMMON_SHLIB, SHLINK): New variables. 2153 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal. 2154 (STAGESTUFF): Remove variable. 2155 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB). 2156 (stamp-piclist, piclist): New targets. 2157 ($(SHLIB), $(SHLINK)): New targets. 2158 ($(OFILES)): Depend upon stamp-picdir. 2159 (disassemble.o): Build twice if PICFLAG is set. 2160 (MOSTLYCLEAN): Add pic/*.o. 2161 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist. 2162 (distclean): Remove pic and stamp-picdir. 2163 (install): Install shared libraries. 2164 (stamp-picdir): New target. 2165 2166Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com> 2167 2168 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support. 2169 Print unknown instruction as "unknown", rather than in hex. 2170 2171Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com> 2172 2173 * dis-buf.c: Include "sysdep.h" before "dis-asm.h". 2174 2175Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com> 2176 2177 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting. 2178 2179Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com> 2180 2181 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte 2182 when necessary. From Ulrich Drepper 2183 <drepper@myware.rz.uni-karlsruhe.de>. 2184 2185Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com> 2186 2187 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with 2188 sparc_num_opcodes. Update architecture enum values. 2189 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname. 2190 (sparc_opcode_lookup_arch): New function. 2191 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes. 2192 (sparc_opcodes): Add v9a shutdown insn. 2193 2194Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com> 2195 2196 * sparc-dis.c (print_insn_sparc): Renamed from print_insn. 2197 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode 2198 architecture. 2199 (print_insn_sparc64): Deleted. 2200 * disassemble.c (disassembler, case bfd_arch_sparc): Always use 2201 print_insn_sparc. 2202 2203 * sparc-opc.c (architecture_pname): Add v9a. 2204 2205Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com> 2206 2207 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was 2208 incorrectly defined as 0x16 when it should be 0x15. 2209 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits! 2210 (alpha_insn_set): added cvtst and cvttq float ops. Also added 2211 excb (exception barrier) which is defined in the Alpha 2212 Architecture Handbook version 2. 2213 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for 2214 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be 2215 disassembled as or, for example. 2216 2217Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com> 2218 2219 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex. 2220 (_print_insn_mips): Change i from int to unsigned int. 2221 2222Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu> 2223 2224 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different 2225 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli. 2226 2227Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com> 2228 2229 * i386-dis.c: Added Pentium Pro instructions. 2230 2231Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com> 2232 2233 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to 2234 being for Power2. 2235 2236Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com> 2237 2238 * sh-opc.h (sh_nibble_type): Added REG_B. 2239 (sh_arg_type): Added A_REG_B. 2240 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc 2241 and stc.l opcodes. 2242 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B. 2243 2244Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com> 2245 2246 * disassemble.c (disassembler): Use new bfd_big_endian macro. 2247 2248Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com> 2249 2250 * Makefile.in (distclean): Remove stamp-h. From Ronald 2251 F. Guilmette <rfg@monkeys.com>. 2252 2253Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com> 2254 2255 From David Mosberger-Tang <davidm@azstarnet.com>: 2256 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys 2257 instruction. 2258 2259Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com> 2260 2261 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC. 2262 (sh_table): Added many SH3 opcodes. 2263 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC. 2264 2265Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com> 2266 2267 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC. 2268 (subco,subco.): Mark this PPC, not PPCCOM. 2269 2270Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com> 2271 2272 * configure: Rebuild with autoconf 2.7. 2273 2274Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com> 2275 2276 * configure: Rebuild with autoconf 2.6. 2277 2278Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com> 2279 2280 * configure.in: Sort list of architectures. Accept but do nothing 2281 for alliant, convex, pyramid, romp, and tahoe. 2282 2283Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com> 2284 2285 * a29k-dis.c (print_special): Change num to unsigned int. 2286 2287Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu> 2288 2289 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when 2290 shifting it. 2291 2292Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com> 2293 2294 * configure.in: Call AC_CHECK_PROG to find and cache AR. 2295 * configure: Rebuilt. 2296 2297Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com> 2298 2299 * configure.in: Add case for bfd_i860_arch. 2300 * configure: Rebuild. 2301 2302Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com> 2303 2304 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands. 2305 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int. 2306 (NEXTDOUBLE): Likewise. 2307 (print_insn_m68k): Don't match fmoveml if there is more than one 2308 register in the list. 2309 (print_insn_arg): Handle a place of '8' for a type of 'L'. 2310 2311Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com> 2312 2313 * m68k-opc.c: Use #W rather than #w. 2314 * m68k-dis.c (print_insn_arg): Handle new 'W' place. 2315 2316Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com> 2317 2318 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf, 2319 and likewise for all the dbxx opcodes. 2320 2321Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com> 2322 2323 * arc-dis.c: Include elf-bfd.h rather than libelf.h. 2324 2325Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk> 2326 2327 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added 2328 the VR4100 specific instructions to the mips_opcodes structure. 2329 2330Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com> 2331 2332 * mpw-config.in, mpw-make.sed: Remove ugly workaround for 2333 ugly Metrowerks bug in CW6, is fixed in CW7. 2334 2335Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com> 2336 2337 * ppc-opc.c (whole file): Add flags for common/any support. 2338 2339Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com> 2340 2341 * Makefile.in (BISON): Remove macro. 2342 (FLAGS_TO_PASS): Remove BISON. 2343 2344Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com> 2345 2346 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de> 2347 2348 * m68k-dis.c (print_insn_m68k): Recognize all two-word 2349 instructions that take no args by looking at the match mask. 2350 (print_insn_arg): Always print "%" before register names. 2351 [case 'c']: Use "nc" for the no-cache case, as recognized by gas. 2352 [case '_']: Don't print "@#" before address. 2353 [case 'J']: Use "%s" as format string, not register name. 2354 [case 'B']: Treat place == 'C' like 'l' and 'L'. 2355 2356Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com> 2357 2358 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode 2359 name correctly. 2360 2361Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com> 2362 2363 From David Mosberger-Tang <davidm@azstarnet.com> 2364 2365 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added. 2366 (alpha_insn_set): added definitions for VAX floating point 2367 instructions (Unix compilers don't generate these, but handcoded 2368 assembly might still use them). 2369 2370 * alpha-dis.c (print_insn_alpha): added support for disassembling 2371 the miscellaneous instructions in the Alpha instruction set. 2372 2373Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com> 2374 2375 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k, 2376 no longer create sysdep.h, sed ppc-opc.c to work around a 2377 serious Metrowerks C bug. 2378 * mpw-make.in: Remove. 2379 * mpw-make.sed: New file, used by mpw-configure to edit 2380 Makefile.in into an MPW makefile. 2381 2382Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com> 2383 2384 * Makefile.in (maintainer-clean): New synonym for realclean. 2385 2386Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com> 2387 2388 * m68k-opc.c: Split pmove patterns which use 'P' into patterns 2389 which use '0', '1', and '2' instead. Specify the proper size for 2390 a pmove immediate operand. Correct the pmovefd patterns to be 2391 moves to a register, not from a register. 2392 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'. 2393 2394Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com> 2395 2396 * sparc-opc.c (sparc_opcodes): Mark all insns that reference 2397 %psr, %wim, %tbr as F_NOTV9. 2398 2399Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com> 2400 2401 * Makefile.in (Makefile): Just rebuild Makefile when running 2402 config.status. 2403 (config.h, stamp-h): New targets. 2404 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM 2405 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when 2406 rebuilding config.h. 2407 * configure: Rebuild. 2408 2409 * mips-opc.c: Change unaligned loads and stores with "t,A" 2410 operands to use "t,A(b)". 2411 2412Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com> 2413 2414 * sh-dis.c (print_insn_shx): Add F_FR0 support. 2415 2416Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com> 2417 2418 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate 2419 until 3 instead of until 2. 2420 2421Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com> 2422 2423 * Makefile.in (ALL_CFLAGS): Define. 2424 (.c.o, disassemble.o): Use $(ALL_CFLAGS). 2425 (MOSTLYCLEAN): Add config.log. 2426 (distclean): Don't remove config.log. 2427 * configure.in: Substitute HDEFINES. 2428 * configure: Rebuild. 2429 2430Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com> 2431 2432 * sh-opc.h (sh_arg_type): Add F_FR0. 2433 (sh_table, case fmac): Add F_FR0 as first argument. 2434 2435Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com> 2436 2437 * sh-opc.h (sh_opcode_info): Increase arg array size to 4. 2438 2439Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com> 2440 2441 * sparc-dis.c: Remove all references to NO_V9. 2442 2443Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com> 2444 2445 * aclocal.m4: Just include ../bfd/aclocal.m4. 2446 * configure: Rebuild. 2447 2448Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com> 2449 2450 * sparc-dis.c (X_DISP19): Define. 2451 (print_insn, case 'G'): Use it. 2452 (print_insn, case 'L'): Sign extend displacement. 2453 2454Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com> 2455 2456 * configure.in: Run ../bfd/configure.host before AC_PROG_CC. 2457 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute 2458 host_makefile_frag or frags. 2459 * aclocal.m4: New file. 2460 * configure: Rebuild. 2461 * Makefile.in (INSTALL): Set to @INSTALL@. 2462 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@. 2463 (INSTALL_DATA): Set to @INSTALL_DATA@. 2464 (AR): Set to @AR@. 2465 (AR_FLAGS): Set to rc rather than qc. 2466 (CC): Define as @CC@. 2467 (CFLAGS): Set to @CFLAGS@. 2468 (@host_makefile_frag@): Remove. 2469 (config.status): Remove dependency upon @frags@. 2470 2471 * configure.in: ../bfd/config.bfd now just sets shell variables. 2472 Use them rather than looking through target Makefile fragments. 2473 * configure: Rebuild. 2474 2475Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com> 2476 2477 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M. 2478 2479Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com> 2480 2481 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn. 2482 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic 2483 sparc64 insns. 2484 2485 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn. 2486 (lookup_{name,value}): New functions. 2487 (prefetch_table): New static local. 2488 (sparc_{encode,decode}_prefetch): New functions. 2489 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function). 2490 2491Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com> 2492 2493 * sh-opc.h: Add blank lines to improve readabililty of sh3e 2494 instructions. 2495 2496Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com> 2497 2498 * sh-dis.c: Correct comment on first line of file. 2499 2500Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com> 2501 2502 * disassemble.c (disassembler): Handle bfd_mach_sparc64. 2503 2504 * sparc-opc.c (asi, membar): New static locals. 2505 (sparc_{encode,decode}_{asi,membar}): New functions. 2506 (sparc_opcodes, membar insn): Fix. 2507 * sparc-dis.c (print_insn): Call sparc_decode_asi. 2508 Support decoding of membar masks. 2509 (X_MEMBAR): Define. 2510 2511Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com> 2512 2513 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl. 2514 2515Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com> 2516 2517 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis, 2518 and likewise for the other branches. Add bhs as an alias for bcc, 2519 and likewise for the size variants. Add dbhs as an alias for 2520 dbcc. 2521 2522Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu) 2523 2524 * sh-opc.h (FP sts instructions): Update to match reality. 2525 2526Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com> 2527 2528 * m68k-dis.c: (fpcr_names): Add % before all register names. 2529 (reg_names): Likewise. 2530 (print_insn_arg): Don't explicitly print % before register names. 2531 Add % before register names in static array names. In case 'r', 2532 print data registers as `@(Dn)', not `Dn@'. When printing a 2533 memory address, don't print @# before it. 2534 (print_indexed): Change base_disp and outer_disp from int to 2535 bfd_vma. Print using MIT syntax, not mutant invalid Motorola 2536 syntax. Sign extend 8 byte displacement correctly. 2537 (print_base): Print using MIT syntax. Print zpc when appropriate. 2538 Change parameter disp from int to bfd_vma. 2539 2540 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases 2541 for jsr. 2542 2543Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu) 2544 2545 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N, 2546 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N. 2547 * sh-opc.h (sh_arg_type): Add new operand types. 2548 (sh_table): Add new opcodes from SH3E Floating Point ISA. 2549 2550Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com> 2551 2552 * Makefile.in (distclean): Remove generated file config.h. 2553 2554Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com> 2555 2556 * Makefile.in (distclean): Remove generated file config.h. 2557 2558Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com> 2559 2560 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h. 2561 Clean up tables. 2562 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff. 2563 (opcode): Remove. 2564 (print_insn_m68k): Change d to be const. Use m68k_numopcodes 2565 rather than numopcodes. Use m68k_opcodes rather than removed 2566 opcode function. Don't check F_ALIAS. 2567 (print_insn_arg): Change first parameter to be const char *. 2568 * Makefile.in (ALL_MACHINES): Add m68k-opc.o. 2569 (m68k-opc.o): New target. 2570 * configure.in: Build m68k-opc.o for bfd_m68k_arch. 2571 * configure: Rebuild. 2572 2573Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com> 2574 2575 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define. 2576 (opcode_bits, opcode_hash_table): New variables. 2577 (opcodes_initialized): Renamed from opcodes_sorted. 2578 (build_hash_table): New function. 2579 (is_delayed_branch): Use hash table. 2580 (print_insn): Renamed from print_insn_sparc, made static. 2581 Build and use hash table. If !sparc64, ignore sparc64 insns, 2582 and vice-versa if sparc64. 2583 (print_insn_sparc, print_insn_sparc64): New functions. 2584 (compare_opcodes): Move sparc64 opcodes to end. 2585 Print commutative insns with constant second. 2586 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS. 2587 2588Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com> 2589 2590 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use 2591 print_address_func for A_BDISP12 and A_BDISP8. Correct test which 2592 avoids printing a delay slot in a delay slot. 2593 * sh-opc.h (sh_table): Fully bracket last entry. 2594 2595Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com> 2596 2597 * sparc-opc.c (sllx, srax, srlx): Fix disassembly. 2598 2599Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com> 2600 2601 * configure.in: Get host_makefile_frag from ${srcdir}. 2602 2603 * configure.in: Autoconfiscated. Check for string[s].h. Create 2604 config.h from config.in. Don't set up sysdep.h link. 2605 * sysdep.h: New file. 2606 * configure, config.in: New files, generated from configure.in. 2607 * Makefile.in: Updated to be processed autoconf-style. 2608 (distclean): Keep sysdep.h. Remove config.log and config.cache. 2609 (Makefile): Depend on config.status. 2610 (config.status): New rule. 2611 * configure.bat: Update Makefile substitutions. 2612 2613Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com> 2614 2615 * mips-opc.c (L1): Define. 2616 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid, 2617 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti, 2618 and wb. 2619 2620Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com> 2621 2622 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu 2623 if ISA 3 and addu otherwise, replacing or, since some MIPS chips 2624 have multiple add units but only a single logical unit. 2625 2626 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3, 2627 shifted by 18, without any insertion or extraction function. 2628 (insert_cr, extract_cr): Remove. 2629 2630Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com> 2631 2632 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before 2633 register names. 2634 2635Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com> 2636 2637 * mpw-config.in: Add sh and i386 configs, remove sparc config. 2638 * sh-opc.h: Add copyright. 2639 2640Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com> 2641 2642 * Makefile.in (crunch-m68k): Delete extra target accidentally 2643 checked in a while ago. 2644 2645Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com> 2646 2647 * sh-opc.h (sh_table): Add SH3 support. 2648 2649Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com> 2650 2651 * sh-opc.h: Added bsrf and braf. 2652 2653Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk) 2654 2655 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete 2656 bogus [ls]fm{ea,fd} patterns. 2657 2658 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc. 2659 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and 2660 initialize it from memory. Make function static. 2661 (print_insn_{big,little}_arm): New functions. 2662 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for 2663 the correct endianness. 2664 2665Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com> 2666 2667 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from 2668 enum list. 2669 2670Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com> 2671 2672 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April 2673 17th, so that it builds again using GCC as the compiler. 2674 2675Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com> 2676 2677 * mips-dis.c (print_insn_little_mips): Cast return value from 2678 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips 2679 expects an unsigned long, and that might be fewer words of 2680 argument storage (e.g., if bfd_vma is long long on a 32-bit 2681 machine). 2682 (print_insn_big_mips): Likewise with bfd_getb32 value. 2683 (_print_insn_mips): Now static. 2684 2685Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com> 2686 2687 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because 2688 gcc memory hog problem with initializer is fixed. 2689 2690Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com> 2691 2692 Merge in support for Mac MPW as a host. 2693 (Old change descriptions retained for informational value.) 2694 2695 * mpw-config.in (archname): Compute from the config. 2696 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp. 2697 2698 * mpw-config.in (target_arch): Compute from canonical target. 2699 (m68k, mips, powerpc, sparc): Add architectures. 2700 * mpw-make.in (disassemble.c.o): Add. 2701 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far). 2702 2703 * mpw-config.in (BFD_MACHINES): Set to a default value. 2704 * mpw-make.in (BFD_MACHINES): Remove wired-in value. 2705 2706 * mpw-make.in (CSEARCH): Add extra-include to search path. 2707 2708 * mpw-config.in (varargs.h): Don't create. 2709 (sysdep.h): Create using forward-include. 2710 * mpw-make.in (CSEARCH): Add include/mpw to search path. 2711 2712 * mpw-config.in: New file, MPW version of configure.in. 2713 * mpw-make.in: New file, MPW version of Makefile.in. 2714 2715Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com> 2716 2717 * alpha-dis.c (print_insn_alpha): Put empty statement after 2718 default label. 2719 2720Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu) 2721 2722 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version. 2723 (low_sign_extend): Likewise. 2724 (get_field): Delete unused function. 2725 (set_field, deposit_14, deposit_21): Likewise. 2726 2727Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com> 2728 2729 * i386-dis.c: Support for more pentium opcodes. From Guy Harris 2730 (guy@netapp.com). 2731 2732Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com) 2733 2734 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de) 2735 2736 * alpha-opc.h (OSF_ASMCODE): define 2737 print pal-code names as defined in App C of the 2738 Alpha Architecture Reference Manual 2739 2740 * alpha-dis.c: cleaned up output 2741 print stylized code forms as defined in App A.4.3 of the 2742 Alpha Architecture Reference Manual 2743 2744Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com> 2745 2746 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for 2747 `rfe'. 2748 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R', 2749 'N', and 'M'. 2750 2751Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com> 2752 2753 * m68k-dis.c (opcode): New function. Returns address of opcode 2754 table entry given index, even if the opcode table was split to 2755 work around gcc bugs. 2756 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes 2757 directly. 2758 (BREAK_UP_BIG_DECL): Make secondary array static and const. 2759 (reg_names): Now const. 2760 (print_insn_arg): Arrays cacheFieldName and names now const. 2761 (print_indexed): Array scales now const. 2762 2763Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com> 2764 2765 * ppc-opc.c: Sort recently added instructions by minor opcode 2766 number within major opcode number. 2767 2768Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu) 2769 2770 * hppa-dis.c: Include libhppa.h. 2771 2772Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com> 2773 2774 * mips-opc.c: Change dli to use M_DLI, and add dla. 2775 2776Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) 2777 2778 * Makefile.in (ALL_MACHINES): Add w65-dis.o. 2779 2780Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com> 2781 2782 * mips-opc.c: Add r4650 mul instruction. 2783 2784Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com> 2785 2786 * mips-opc.c: Add uld and usd macros for unaligned double load and 2787 store. 2788 2789Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com> 2790 2791 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci, 2792 mfdcr, mtdcr, icbt, iccci. 2793 2794Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com> 2795 2796 * i960-dis.c (struct tabent, struct sparse_tabent): Change the 2797 signed char fields to shorts, more portable. 2798 2799Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com> 2800 2801 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the 2802 char fields as signed chars, since they may have negative values. 2803 2804Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com> 2805 2806 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum 2807 (mycroft@netbsd.org). 2808 2809Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com> 2810 2811 From "Logg, Ed" <elogg@ea.com>: 2812 * ppc-opc.c (extract_bdm): Correct parenthezisation. 2813 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized 2814 value. 2815 2816Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com> 2817 2818 * ppc-opc.c: Changes based on patch from David Edelsohn 2819 <edelsohn@mhpcc.edu>. 2820 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of 2821 SPR. 2822 (FXM_MASK): Define. 2823 (insert_tbr): New static function. 2824 (extract_tbr): New static function. 2825 (XFXFXM_MASK, XFXM): Define. 2826 (XSPRBAT_MASK, XSPRG_MASK): Define. 2827 (powerpc_opcodes): Add instructions to access special registers by 2828 name. Add mtcr and mftbu. 2829 2830Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com> 2831 2832 * mips-opc.c (P3): Define. 2833 (mips_opcodes): Add mad and madu. 2834 2835Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat> 2836 2837 * configure.in: Add W65 support. 2838 * disassemble.c: Likewise. 2839 * w65-opc.h, w65-dis.c: New files. 2840 2841Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com) 2842 2843 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit 2844 immediates. 2845 2846Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> 2847 2848 * mips-opc.c: Add dli as a synonym for li. 2849 2850Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com> 2851 2852 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and 2853 print something for reserved opcode values, even if it won't 2854 assemble again. 2855 2856 * mips-dis.c (_print_insn_mips): When initializing, shift right 2857 and mask, to avoid sign extension problems on the Alpha. 2858 2859 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr 2860 control registers. 2861 2862Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com) 2863 2864 * sh-opc.h (mov.l gbr): Get direction right. 2865 * sh-dis.c (print_insn_shx): New function. 2866 (print_insn_shl, print_insn_sh): Call print_insn_shx to 2867 print opcodes with right byte order. 2868 2869Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com> 2870 2871 * ns32k-dis.c (struct ns32k_option): Renamed from struct option, 2872 to avoid conflicts with getopt. 2873 2874Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> 2875 2876 * hppa-dis.c (print_insn_hppa): Read the instruction using 2877 bfd_getb32, so that it works on a little endian or 64 bit host. 2878 Remove unused local variable op. 2879 2880Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> 2881 2882 * mips-opc.c: Use or instead of addu for pseudo-op move, since 2883 addu does not work correctly if -mips3. 2884 2885Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> 2886 2887 * a29k-dis.c (print_special): Add special register names defined 2888 on 29030, 29040 and 29050. 2889 (print_insn): Handle new operand type 'I'. 2890 2891Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> 2892 2893 * Makefile.in (INSTALL): Use top level install.sh script. 2894 2895Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> 2896 2897 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so 2898 that it works on a little endian host. 2899 2900Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com> 2901 2902 * configure.in: Use ${config_shell} when running config.bfd. 2903 2904Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) 2905 2906 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3. 2907 2908Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) 2909 2910 * a29k-dis.c (print_insn): Print the opcode. 2911 2912Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) 2913 2914 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd. 2915 2916Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu) 2917 2918 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3. 2919 2920Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) 2921 2922 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions 2923 which store a value into memory. 2924 2925Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org) 2926 2927 * configure.in, Makefile.in, disassemble.c: Add support for the ARM. 2928 * arm-dis.c, arm-opc.h: New files. 2929 2930Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com) 2931 2932 * Makefile.in (ns32k-dis.o): Add dependency. 2933 * ns32k-dis.c (print_insn_arg): Declare initialized local as 2934 string, not as array of chars. 2935 2936Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com) 2937 2938 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'. 2939 2940 * sparc-opc.c: Added sparclite extended FP operations, and 2941 versions of v9 impdep* instructions permitting specification of 2942 the OPF field. 2943 2944Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com) 2945 2946 * i960-dis.c (reg_names): Now const. 2947 (struct sparse_tabent): New type, copied from array type in mem 2948 function. 2949 (ctrl): Local static array ctrl_tab now const. 2950 (cobr): Local static array cobr_tab now const. 2951 (mem): Local variables reg1, reg2, reg3 now point to const. Local 2952 static variable mem_tab no longer explicitly initialized. Changed 2953 mem_init to const array of struct sparse_tabent. 2954 (reg): Local static variable reg_tab no longer explicitly 2955 initialized. Changed reg_init to const array of struct 2956 sparse_tabent. 2957 (ea): Local static array scale_tab now const. 2958 2959 * i960-dis.c (reg): Added i960JX instructions to reg_init table. 2960 (REG_MAX): Updated. 2961 2962Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com) 2963 2964 * configure.bat: the disassember needs to be enabled for 2965 "objdump -d" to work in djgpp. 2966 2967Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com) 2968 2969 * ns32k-dis.c: Deleted all code in "#ifdef GDB". 2970 (invalid_float): Enabled general version, doesn't require running 2971 on ns32k host. Changed to take char* argument, and test for 2972 explicitly specified sizes, instead of using sizeof() on host CPU 2973 types. 2974 (INVALID_FLOAT): Cast first argument. 2975 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532, 2976 list_P032, list_M032): Now const. 2977 (optlist, list_search): Made appropriate arguments now point to 2978 const. 2979 (print_insn_arg): Changed static array of one-character-string 2980 pointers into a static const array of characters; fixed sprintf 2981 statement accordingly. 2982 2983Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au) 2984 2985 * ns32k-dis.c: Semi-new file. Had apparently been dropped 2986 from distribution. A ns32k-dis.c from a previous distribution has 2987 been brought up to date and supports the new interface. 2988 2989 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k. 2990 2991 * configure.in: add bfd_ns32k_arch target support. 2992 2993 * Makefile.in: add ns32k-dis.o to ALL_MACHINES. 2994 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o. 2995 2996Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com) 2997 2998 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch 2999 disassembly right. 3000 3001Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com) 3002 3003 * h8300-dis.c, mips-dis.c: Don't use true and false. 3004 3005Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com) 3006 3007 * configure.in: Change --with-targets to --enable-targets. 3008 3009Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) 3010 3011 * mips-dis.c (_print_insn_mips): Build a static hash table mapping 3012 opcodes to the first instruction with that opcode, to speed 3013 disassembly of large files. From ralphc@pyramid.com (Ralph 3014 Campbell). 3015 3016Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3017 3018 * Makefile.in (mostlyclean): Fix typo (was mostyclean). 3019 3020Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com) 3021 3022 * configure.bat: update to latest makefile.in 3023 3024Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com) 3025 3026 * a29k-dis.c (print_insn): Print 'x' type operand in hex. 3027 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly. 3028 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay 3029 slot insn is in a delay slot. 3030 * z8k-opc.h: (resflg): Fix patterns. 3031 * h8500-opc.h Fix CR insn patterns. 3032 3033Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3034 3035 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and 3036 "cmpl" before POWER versions, so that gas -many uses them. 3037 3038Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com) 3039 3040 * disassemble.c: New file. 3041 * Makefile.in (OFILES): Add disassemble.o. 3042 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS). 3043 * configure.in: Define ARCHDEFS in Makefile. Code taken from 3044 binutils/configure.in. 3045 3046 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the 3047 opcode being examined. 3048 3049Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3050 3051 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS. 3052 (insert_ral, insert_ram, insert_ras): New functions. 3053 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and 3054 RAS for store with update. 3055 3056Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3057 3058 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn 3059 (edelsohn@npac.syr.edu). 3060 3061Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3062 3063 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an 3064 immediate argument. 3065 3066Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com) 3067 3068 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0". 3069 3070Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3071 3072 * ppc-opc.c (powerpc_operands): The signedp field has been 3073 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag 3074 instead. Add new operand SISIGNOPT. 3075 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT. 3076 Based on patch from David Edelsohn (edelsohn@npac.syr.edu). 3077 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather 3078 than signedp field. 3079 3080Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) 3081 3082 * i386-dis.c (struct private): Renamed to dis_private. `private' 3083 is a reserved word for dynix cc. 3084 3085Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3086 3087 * configure.in: Change error message to refer to bfd/config.bfd 3088 rather than bfd/configure.in. 3089 3090Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu) 3091 3092 * ppc-opc.c: Define POWER2 as short alias flag. 3093 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and 3094 fsqrt. 3095 3096Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3097 3098 * i960-dis.c (print_insn_i960): Don't read a second word for 3099 opcodes 0, 1, 2 and 3. 3100 3101Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3102 3103 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch. 3104 3105Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3106 3107 * m68881-ext.c: Removed; no longer used. 3108 * Makefile.in: Changed accordingly. 3109 3110 * m68k-dis.c (ext_format_68881): Don't declare. 3111 (print_insn_m68k): If an instruction uses place 'i', it uses at 3112 least four fixed bytes. 3113 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For 3114 extended float, convert to double using floatformat_to_double, not 3115 ieee_extended_to_double, and fetch the data before converting it. 3116 3117Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3118 3119 * mips-opc.c: It's sqrt.s, not sqrt.w. From 3120 davidj@ICSI.Berkeley.EDU (David Johnson). 3121 3122Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3123 3124 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the 3125 PowerPC uses bdnz[l][a]. 3126 3127Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) 3128 3129 * dis-buf.c, i386-dis.c: Include sysdep.h. 3130 3131Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3132 3133 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o. 3134 3135 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported 3136 by Motorola PowerPC 601 with PPC_OPCODE_601. 3137 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): 3138 Disassemble Motorola PowerPC 601 instructions as well as normal 3139 PowerPC instructions. 3140 3141Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com) 3142 3143 * i960-dis.c (reg, mem): Just use a static array instead of 3144 calling xmalloc. 3145 3146Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu) 3147 3148 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the 3149 condition name index if this is for a negated condition. 3150 3151 * hppa-dis.c (print_insn_hppa): No space before 'H' operand. 3152 Floating point format for 'H' operand is backwards from normal 3153 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8' 3154 operands (fmpyadd and fmpysub), handle bizarre register 3155 translation correctly for single precision format. 3156 3157 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F' 3158 or 'I' operands if the next format specifier is 'M' (fcmp 3159 condition completer). 3160 3161Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3162 3163 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a 3164 single number giving a bitmask for the MB and ME fields of an M 3165 form instruction. Change NB to accept 32, and turn it into 0; 3166 also turn 0 into 32 when disassembling. Seperated SH from NB. 3167 (insert_mbe, extract_mbe): New functions. 3168 (insert_nb, extract_nb): New functions. 3169 (SC_MASK): Mask out SA and LK bits. 3170 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT, 3171 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark 3172 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi", 3173 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.", 3174 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to 3175 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions. 3176 (powerpc_macros): Define table of macro definitions. 3177 (powerpc_num_macros): Define. 3178 3179 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands 3180 if PPC_OPERAND_NEXT is set. 3181 3182Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3183 3184 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of 3185 char. Retrieve contents using bfd_getl32 instead of shifting. 3186 3187Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3188 3189 * ppc-opc.c: New file. Opcode table for PowerPC, including 3190 opcodes for POWER (RS/6000). 3191 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler. 3192 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o. 3193 (CFILES): Add ppc-dis.c. 3194 (ppc-dis.o, ppc-opc.o): New targets. 3195 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch. 3196 3197Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu) 3198 3199 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template. 3200 No space before 'u', 'f', or 'N'. 3201 3202Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com) 3203 3204 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading 3205 farther than we should. 3206 3207 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS. 3208 3209Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com) 3210 3211 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments. 3212 3213Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com) 3214 3215 * i960-dis.c (print_insn_i960): Only read word2 if the instruction 3216 needs it, to prevent reading past the end of a section. 3217 3218Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3219 3220 * mips-opc.c: Use macro for j instruction, to support SVR4 PIC. 3221 Removed t,A case for la; always use t,A(b) case. 3222 3223Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3224 3225 From Ted Lemen <mellon@pepper.ncd.com> 3226 * mips-dis.c (print_insn_arg): Handle 'k'. 3227 * mips-opc.c: Make cache use k, not t. 3228 3229Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) 3230 3231 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add 3232 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct 3233 FLOAT_FORMAT_CODE to put out floating point register names. 3234 3235Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3236 3237 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC. 3238 3239Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3240 3241 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x. 3242 3243Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3244 3245 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts 3246 larger than 32. Moved dsxx32 variants first for disassembler. 3247 3248Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) 3249 3250 * z8kgen.c, z8k-opc.h: Add full lda information. 3251 3252Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu) 3253 3254 * hppa-dis.c (print_insn_hppa): Do not emit a space after 3255 movb instructions. Any necessary space will be emitted by 3256 the code to handle nullification completers. 3257 3258Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3259 3260 * mips-opc.c: Moved l.d down so that it disassembles as ldc1. 3261 3262Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) 3263 3264 * alpha-opc.h: Add ldl_l, fix typo for ldq_u. 3265 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE. 3266 3267Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3268 3269 * mips-opc.c: Correct lwu opcode value (book had it wrong). 3270 3271Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) 3272 3273 * z8k-dis.c (FETCH_DATA): get just the right amount of data. 3274 (unpack_instr): Cope with ARG_IMM4M1 type instructions. 3275 3276Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com) 3277 3278 * m88k-dis.c (m88kdis): comment change. Remove space after 3279 printing mnemonic. 3280 (printop): handle new arg types DEC and XREG for m88110. 3281 3282Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu) 3283 3284 * hppa-dis.c (print_insn_hppa): Handle 'z' operand 3285 type for absolute branch addresses. Delete special 3286 "ble" and "be" code in 'W' operand code. 3287 3288Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3289 3290 * mips-opc.c: Set hazard information correctly for branch 3291 likely instructions. 3292 3293Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) 3294 3295 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use 3296 info->fprintf_func for printing and info->print_address_func for 3297 address output. 3298 3299Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3300 3301 * mips-opc.c: Set INSN_TRAP for tXX instructions. 3302 3303Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3304 3305 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): 3306 Corrected second case of "b" for disassembler. 3307 3308Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3309 3310 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls 3311 to BFD swapping routines to correspond to BFD name changes. 3312 3313Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3314 3315 * mips-opc.c: Change div machine instruction to be z,s,t rather 3316 than s,t. Change div macro to be d,v,t rather than d,s,t. 3317 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu, 3318 rem and remu which generates only the corresponding div 3319 instruction. This is for compatibility with the MIPS assembler, 3320 which only generates the simple machine instruction when an 3321 explicit destination of $0 is used. 3322 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero). 3323 3324Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3325 3326 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set 3327 WR_31 hazard for bal, bgezal, bltzal. 3328 3329Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com) 3330 3331 * hppa-dis.c (print_insn_hppa): Use print function 3332 from within the disassemble_info, not fprintf_filtered. 3333 3334Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) 3335 3336 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff 3337 Law, law@cs.utah.edu.) 3338 3339Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3340 3341 * mips-opc.c ("absu"): Removed. 3342 ("dabs"): Added. 3343 3344Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3345 3346 * mips-opc.c: Added r6000 and r4000 instructions and macros. 3347 Changed hazard information to distinguish between memory load 3348 delays and coprocessor load delays. 3349 3350Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3351 3352 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s. 3353 3354Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com) 3355 3356 * configure.in: Don't pass cpu to config.bfd. 3357 3358Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3359 3360 * m88k-dis.c (m88kdis): Make class unsigned. 3361 3362Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com) 3363 3364 * alpha-dis.c (print_insn_alpha): One branch format case was 3365 missing the instruction name. 3366 3367Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com) 3368 3369 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS. 3370 Add the arch-specific auxiliary files. 3371 (OFILES): Remove the arch-specific auxiliary files 3372 and use BFD_MACHINES instead of DIS_LIBS. 3373 * configure.in: Set BFD_MACHINES based on --with-targets option. 3374 3375Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3376 3377 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly 3378 for swc1. 3379 3380Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com) 3381 3382 * sparc-opc.c: Change CONST to const to deal with gcc 3383 -Dconst=__const -traditional. 3384 3385Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3386 3387 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took 3388 coprocessor instructions out of #if 0, and made them use new 3389 argument type "C". 3390 3391Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com) 3392 3393 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h. 3394 3395Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com) 3396 3397 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch 3398 instruction, for use by the disassembler. 3399 3400 * sparc-dis.c (SEX): Add sign extension macro. Replace many 3401 hand-coded sign extensions that depended on 32-bit host ints. 3402 FIXME, we still depend on big-endian host bitfield ordering. 3403 (sparc_print_insn): Set the insn_info_valid field, and the 3404 other fields that describe the instruction being printed. 3405 3406Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com) 3407 3408 * sparc-opc.c (call): Accept all 6 addressing modes valid for 3409 `jmp' instead of just one of them. 3410 3411Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com) 3412 3413 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names. 3414 (fput_fp_reg_r): Renamed from fput_reg_r. 3415 (fput_fp_reg): New function. 3416 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate. 3417 3418 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards. 3419 3420 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD. 3421 3422Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com) 3423 3424 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'. 3425 3426 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n', 3427 don't output a space. 3428 3429 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad. 3430 3431Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com) 3432 3433 * mips-opc.c: New file, containing opcode table from 3434 ../include/opcode/mips.h. 3435 * Makefile.in: Add it. 3436 3437Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3438 3439 * m88k-dis.c: New file, moved in from gdb and changed to use the 3440 new dis-asm.h disassembler interface. 3441 * Makefile.in (DIS_LIBS): Added m88k-dis.o. 3442 (m88k-dis.o): New target. 3443 3444Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com) 3445 3446 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to 3447 argument string const char * to correspond to opcode/mips.h. 3448 3449Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com) 3450 3451 * mips-dis.c: Updated to account for name changes in new version 3452 of opcode/mips.h. 3453 * Makefile.in: Added header file dependencies. 3454 3455Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com) 3456 3457 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction. 3458 3459Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com) 3460 3461 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign 3462 extend, rather than shifts. 3463 3464Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com) 3465 3466 * Makefile.in: Undo 15 June change. 3467 3468Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com) 3469 3470 * m68k-dis.c (print_insn_arg): Change return value to byte count 3471 or error code. 3472 * m68k-dis.c: Re-write to detect invalid operands before 3473 printing anything, so we can handle this the same way we 3474 handle invalid opcodes. 3475 3476Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) 3477 3478 * sh-dis.c, sh-opc.h: Understand some more opcodes. 3479 3480Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com) 3481 3482 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other 3483 header files. 3484 3485Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) 3486 3487 * sparc-dis.c: Don't declare qsort, since sysdep.h might. 3488 3489 * configure.in: Do make sysdep.h link. 3490 * Makefile.in: Search ../include. Don't search ../bfd. 3491 3492Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com) 3493 3494 Changes from Jeff Law, law@cs.utah.edu: 3495 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed. 3496 Do not print a space before the completers specified by 3497 'a' and 'd'. 3498 3499Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com) 3500 3501 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is 3502 defined, since gdb has been fixed. 3503 3504 Changes from Jeff Law, law@cs.utah.edu: 3505 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg, 3506 fput_reg_r, fput_creg, fput_const, and fputs_filtered should 3507 be a *disassemble_info, not a *FILE. 3508 * hppa-dis.c: Support 'd', '!', and 'a'. 3509 * hppa-dis.c: Support 's' to extract a 2 bit space register. 3510 * hppa-dis.c: Delete cases which are no longer needed. 3511 3512Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com) 3513 3514 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes. 3515 3516Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com) 3517 3518 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with 3519 H8/300-H opcodes. 3520 3521Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com) 3522 3523 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h. 3524 * configure.in: No longer need to configure to get sysdep.h. 3525 3526Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com) 3527 3528 * Patches from Jeffrey Law <law@cs.utah.edu>. 3529 * hppa-dis.c: Support 'I', 'J', and 'K' in output 3530 templates for 1.1 FP computational instructions. 3531 3532Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) 3533 3534 * h8500-dis.c (print_insn_h8500): Address argument is type 3535 bfd_vma. 3536 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002): 3537 Ditto. 3538 3539 * h8500-opc.h (addr_class_type): No comma at end of enumerator. 3540 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto. 3541 3542 * sparc-dis.c (compare_opcodes): Move static declaration to 3543 top-level. 3544 3545Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) 3546 3547 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp 3548 instruction, remove unimp hack from 'l' argument. 3549 3550Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com) 3551 3552 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's 3553 happy. 3554 3555Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com) 3556 3557 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson): 3558 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor 3559 instructions. 3560 3561Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) 3562 3563 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some 3564 arrays of string pointers to 2-d arrays of chars, to save 3565 space. 3566 3567Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com) 3568 3569 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c: 3570 Cast second arg to read_memory_func to "bfd_byte *", as necessary. 3571 3572Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) 3573 3574 * hppa-dis.c: New file from Utah, adapted to new disassembler 3575 calling interface. 3576 * Makefile.in: Include it. 3577 3578Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com) 3579 3580 * sh-dis.c, sh-opc.h: New files. 3581 3582Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com) 3583 3584 * alpha-dis.c, alpha-opc.h: New files. 3585 3586Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) 3587 3588 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed 3589 value. 3590 3591Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com) 3592 3593 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias. 3594 3595Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com) 3596 3597 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than 3598 const. 3599 3600Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com) 3601 3602 * sparc-dis.c: Use fprintf_func a few places where I forgot, 3603 and double percent signs a few places. 3604 3605 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils. 3606 3607 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c: 3608 Use info->print_address_func not print_address. 3609 3610 * dis-buf.c (generic_print_address): New function. 3611 3612Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com) 3613 3614 * Makefile.in: Add sparc-dis.c. 3615 sparc-dis.c: New file, merges binutils and gdb versions as follows: 3616 From GDB: 3617 Add `add' instruction to the set that get checked 3618 for a preceding `sethi' in order to print an absolute address. 3619 * (print_insn): Disassembly prefers real instructions. 3620 (is_delayed_branch): Speed up. 3621 * sparc-opc.c: Add ALIAS bit to aliases. Fix up opcode tables. 3622 Still missing some float ops, and needs testing. 3623 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by 3624 F_ALIAS. Use printf, not fprintf, when not passing a file 3625 pointer... 3626 (compare_opcodes): Check that identical instructions have 3627 identical opcodes, complain otherwise. 3628 From binutils: 3629 * New 'm' arg. 3630 * Include reg_names. 3631 From neither: 3632 Use dis-asm.h/read_memory_func interface. 3633 3634Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com) 3635 3636 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data): 3637 deliberately return non-zero to setjmp from longjmp. Otherwise 3638 this code fails to compile. 3639 3640Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com) 3641 3642 * m68k-dis.c: Fix prototype for fetch_arg(). 3643 3644Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com) 3645 3646 * dis-buf.c: New file, for new read_memory_func interface. 3647 Makefile.in (OFILES): Include it. 3648 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c: 3649 Use new read_memory_func interface. 3650 3651Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com) 3652 3653 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right. 3654 * h8500-opc.h: Fix couple of opcodes. 3655 3656Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) 3657 3658 * Makefile.in: add dvi & installcheck targets 3659 3660Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com) 3661 3662 * Makefile.in: Update for h8500-dis.c. 3663 3664Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com) 3665 3666 * h8500-dis.c, h8500-opc.h: New files 3667 3668Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com) 3669 3670 * mips-dis.c, z8k-dis.c: Converted to use interface defined in 3671 ../include/dis-asm.h. 3672 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c 3673 and ../gdb/m68k-pinsn.c). 3674 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c 3675 and ../gdb/i386-pinsn.c). 3676 * m68881-ext.c: New file. Moved definition of 3677 ext_format ext_format_68881 from ../gdb/m68k-tdep.c. 3678 * Makefile.in: Adjust for new files. 3679 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com). 3680 * m68k-dis.c: Recognize '9' placement code, so (say) pflush 3681 can be dis-assembled. 3682 3683Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com) 3684 3685 * mips-dis.c (print_insn_arg): Now returns void. 3686 3687Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com) 3688 3689 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h 3690 files that use the macros. 3691 3692Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com) 3693 3694 * mips-dis.c: New file, from gdb/mips-pinsn.c. 3695 * Makefile.in (DIS_LIBS): Added mips-dis.o. 3696 (CFILES): Added mips-dis.c. 3697 3698Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com) 3699 3700 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines 3701 * z8kgen.c, z8k-opc.h: fix sizes of some shifts. 3702 3703Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com) 3704 3705 * Makefile.in: Improve *clean rules. 3706 * configure.in: Allow a default host. 3707 3708Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) 3709 3710 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep 3711 files include other sysdep files 3712 3713Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com) 3714 3715 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint 3716 3717Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com) 3718 3719 * configure.in: For host support, use ../bfd/configure.host 3720 so it stays in sync with the ../bfd/hosts database. 3721 3722Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) 3723 3724 * configure.in: use cpu-vendor-os triple instead of nested cases 3725 3726Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com) 3727 3728 * z8k-dis.c (unparse_instr): fix bug where opcode returned was 3729 *always* the wrong one. 3730 3731Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com) 3732 3733 * z8kgen.c: added copyright info 3734 3735Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com) 3736 3737 * z8k-dis.c (unparse_instr): prettier tabs 3738 * z8kgen.c z8k-opc.h: bug fixes in tables 3739 3740Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com) 3741 3742 * configure.in: Add ncr* configuration. 3743 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make 3744 picayune ANSI compilers happy. 3745 3746Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com) 3747 3748 * configure.in (i386): Make i386 and i486 synonymous for now. 3749 * configure.in (i[34]86-*-sysv4): Add my_host definition. 3750 3751Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com) 3752 3753 * Makefile.in (install): Fix typo. 3754 3755Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com) 3756 3757 * Makefile.in (make): Remove obsolete crud. 3758 (sparc-opc.o): Avoid Sun Make VPATH bug. 3759 3760Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com) 3761 3762 * Makefile.in: since there are no SUBDIRS, remove rule and 3763 references of subdir_do. 3764 3765Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com) 3766 3767 * Makefile.in (install): Get the library name right here too. 3768 Don't install bfd.h, since it's unrelated to this library. No 3769 subdirs to recurse into, either. 3770 (CFILES): The source file has a .c suffix, not .o. 3771 3772 * sparc-opc.c: New file, moved from BFD. 3773 * Makefile.in (OFILES): Build it. 3774 3775Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com) 3776 3777 * z8k-dis.c: fixed forward refferences of some declarations. 3778 3779Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com) 3780 3781 * Makefile.in: get the name of the library right 3782 3783Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com) 3784 3785 * z8k-dis.c: knows how to disassemble z8k stuff 3786 * z8k-opc.h: new file full of z8000 opcodes 3787 3788Fri Aug 28 15:38:03 1992 Ken Raeburn (raeburn@cygnus.com) 3789 3790 * Renamed opc-sparc.c to sparc-opc.c for systems with short 3791 filename constraints. 3792 * Makefile.in: Updated to reflect change. 3793 3794 3795Copyright (C) 1992-1997 Free Software Foundation, Inc. 3796 3797Copying and distribution of this file, with or without modification, 3798are permitted in any medium without royalty provided the copyright 3799notice and this notice are preserved. 3800 3801Local Variables: 3802mode: change-log 3803left-margin: 8 3804fill-column: 74 3805version-control: never 3806End: 3807